gears - spur - module 0.8 - plastic


Category Matches

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.8 - Plastic
Gears - Spur - Module 0.8 - Plastic

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Plastic.

Gears - Spur - Module 0.8 - Plastic with Insert
Gears - Spur - Module 0.8 - Plastic with Insert

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Plastic with Insert.

Gears - Spur - Module 0.8 - Plastic with Stainless Hub
Gears - Spur - Module 0.8 - Plastic with Stainless Hub

Search Rating: 58%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Plastic with Stainless Hub.

Gears - Spur - Module 0.8 - Brass
Gears - Spur - Module 0.8 - Brass

Search Rating: 54%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Brass.

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Search Rating: 53%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Aluminium.

Gears - Spur - Module 0.8 - Steel
Gears - Spur - Module 0.8 - Steel

Search Rating: 53%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Steel.

Gears - Spur - Module 0.8 - Stainless
Gears - Spur - Module 0.8 - Stainless

Search Rating: 53%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Stainless.

Gears Metric Bevel

TopHide Pictures

Gears - Bevel - Module 0.8 - Plastic
Gears - Bevel - Module 0.8 - Plastic

Search Rating: 50%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 0.8 - Plastic.

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.8 - Plastic
Gears - Mitre - Module 0.8 - Plastic

Search Rating: 50%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.8 - Plastic.

Gears Metric Racks

TopHide Pictures

Gear Racks - Module 0.8 - Plastic
Gear Racks - Module 0.8 - Plastic

Search Rating: 50%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Plastic.

Gears Metric Worms

TopHide Pictures

Worm Gears - Module 0.8 Series 2 - Plastic Gear and Metallic Worm
Worm Gears - Module 0.8 Series 2 - Plastic Gear and Metallic Worm

Search Rating: 50%

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Match with metallic worms Module 0.80 Series 2.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Worm Gears - Module 0.8 Series 2 - Plastic Gear and Metallic Worm.

Gears Metric Stem

TopHide Pictures

Gears - Spur - Module 0.8 - Stem - Steel
Gears - Spur - Module 0.8 - Stem - Steel

Search Rating: 44%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.8 - Stem - Steel.

Spur Gear Stock Metric

TopHide Pictures

Gears - Spur - Stock - Module 0.8 - Steel
Gears - Spur - Stock - Module 0.8 - Steel

Search Rating: 44%

Also see combined categories:
All Metric Spur Gear Stock

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Stock - Module 0.8 - Steel.

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.4 - Plastic
Gears - Spur - Module 0.4 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Plastic.

Gears - Spur - Module 0.4 - Plastic with Insert
Gears - Spur - Module 0.4 - Plastic with Insert

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Plastic with Insert.

Gears - Spur - Module 0.5 - Plastic
Gears - Spur - Module 0.5 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Plastic.

Gears - Spur - Module 0.5 - Plastic with Insert
Gears - Spur - Module 0.5 - Plastic with Insert

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Plastic with Insert.

Gears - Spur - Module 0.7 - Plastic
Gears - Spur - Module 0.7 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.700mm. 20o Pressure Angle. Acetal.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.7 - Plastic.

Gears - Spur - Module 1.25 - Plastic
Gears - Spur - Module 1.25 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1.25 - Plastic.

Gears - Spur - Module 1.5 - Plastic
Gears - Spur - Module 1.5 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. Acetal and Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1.5 - Plastic.

Gears - Spur - Module 1.5 - Plastic with Insert
Gears - Spur - Module 1.5 - Plastic with Insert

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. Acetal and Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1.5 - Plastic with Insert.

Gears - Spur - Module 1 - Plastic
Gears - Spur - Module 1 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Plastic.

Gears - Spur - Module 1 - Plastic with Insert
Gears - Spur - Module 1 - Plastic with Insert

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle.Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Plastic with Insert.

Gears - Spur - Module 1 - Plastic with Stainless Hub
Gears - Spur - Module 1 - Plastic with Stainless Hub

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Plastic with Stainless Hub.

Gears - Spur - Module 2.5 - Plastic
Gears - Spur - Module 2.5 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 2.5 - Plastic.

Gears - Spur - Module 2 - Plastic
Gears - Spur - Module 2 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. Acetal and nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 2 - Plastic.

Gears - Spur - Module 2 - Plastic with Insert
Gears - Spur - Module 2 - Plastic with Insert

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. Acetal and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 2 - Plastic with Insert.

Gears - Spur - Module 3 - Plastic
Gears - Spur - Module 3 - Plastic

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 3 - Plastic.

Hobby Gears

TopHide Pictures

Gears - Spur - Module 0.5 - Hobby - Economy - Plastic
Gears - Spur - Module 0.5 - Hobby - Economy - Plastic

Search Rating: 40%

Also see combined categories:
All Metric Spur Gears
All Hobby Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Hobby - Economy - Plastic.

Gears Metric Bevel

TopHide Pictures

Gears - Bevel - Module 0.8 - Brass
Gears - Bevel - Module 0.8 - Brass

Search Rating: 37%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 0.8 - Brass.

Gears Metric Internal

TopHide Pictures

Gears - Internal - Module 0.8 - Stainless
Gears - Internal - Module 0.8 - Stainless

Search Rating: 37%

Also see combined categories:
All Metric Internal Gears
All Internal Gears

303 stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Internal - Module 0.8 - Stainless.

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.8 - Brass
Gears - Mitre - Module 0.8 - Brass

Search Rating: 37%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.8 - Brass.

Gears Metric Racks

TopHide Pictures

Gear Racks - Module 0.8 - Brass
Gear Racks - Module 0.8 - Brass

Search Rating: 37%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Brass.

Gear Racks - Module 0.8 - Stainless
Gear Racks - Module 0.8 - Stainless

Search Rating: 37%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Stainless.

Gear Racks - Module 0.8 - Steel
Gear Racks - Module 0.8 - Steel

Search Rating: 37%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.8 - Steel.

Pinion Wire Metric

TopHide Pictures

Gears - Pinion Wire - Module 0.8
Gears - Pinion Wire - Module 0.8

Search Rating: 36%

Also see combined categories:
All Metric Pinion Wire

Brass

Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Pinion Wire - Module 0.8.

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.4 - Brass
Gears - Spur - Module 0.4 - Brass

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Brass.

Gears - Spur - Module 0.5 - Brass
Gears - Spur - Module 0.5 - Brass

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Brass.

Gears - Spur - Module 1 - Brass
Gears - Spur - Module 1 - Brass

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Brass.

Gears - Spur - Module 0.4 - Steel
Gears - Spur - Module 0.4 - Steel

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Steel.

Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Aluminium.

Gears - Spur - Module 0.5 - Steel
Gears - Spur - Module 0.5 - Steel

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Steel.

Gears - Spur - Module 1 - Aluminium
Gears - Spur - Module 1 - Aluminium

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 2024 aluminium.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Aluminium.

Gears - Spur - Module 1 - Steel
Gears - Spur - Module 1 - Steel

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Steel.

Gears - Spur - Module 2.5 - Steel
Gears - Spur - Module 2.5 - Steel

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. Carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 2.5 - Steel.

Gears - Spur - Module 3 - Steel
Gears - Spur - Module 3 - Steel

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. Carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 3 - Steel.

Gears - Spur - Module 0.4 - Stainless
Gears - Spur - Module 0.4 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.4 - Stainless.

Gears - Spur - Module 1.25 - Stainless
Gears - Spur - Module 1.25 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1.25 - Stainless.

Gears - Spur - Module 1.5 - Stainless
Gears - Spur - Module 1.5 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1.5 - Stainless.

Gears - Spur - Module 1.5 - Steel
Gears - Spur - Module 1.5 - Steel

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. AISI4135 carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1.5 - Steel.

Gears - Spur - Module 2.5 - Stainless
Gears - Spur - Module 2.5 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 2.5 - Stainless.

Gears - Spur - Module 2 - Stainless
Gears - Spur - Module 2 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 2 - Stainless.

Gears - Spur - Module 2 - Steel
Gears - Spur - Module 2 - Steel

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. AISI4135 carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 2 - Steel.

Gears - Spur - Module 3 - Stainless
Gears - Spur - Module 3 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 3 - Stainless.

Gears - Spur - Module 0.5 - Stainless
Gears - Spur - Module 0.5 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 0.5 - Stainless.

Gears - Spur - Module 1 - Stainless
Gears - Spur - Module 1 - Stainless

Search Rating: 36%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - Module 1 - Stainless.

Gears Metric Bevel

TopHide Pictures

Gears - Bevel - Module 0.5 - Plastic
Gears - Bevel - Module 0.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 0.5 - Plastic.

Gears - Bevel - Module 1.5 - Plastic
Gears - Bevel - Module 1.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 1.5 - Plastic.

Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 1 - Plastic.

Gears - Bevel - Module 2.5 - Plastic
Gears - Bevel - Module 2.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 2.5 - Plastic.

Gears - Bevel - Module 2 - Plastic
Gears - Bevel - Module 2 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 2 - Plastic.

Gears - Bevel - Module 3 - Plastic
Gears - Bevel - Module 3 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Bevel - Module 3 - Plastic.

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.5 - Plastic
Gears - Mitre - Module 0.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.5 - Plastic.

Gears - Mitre - Module 1.5 - Plastic
Gears - Mitre - Module 1.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1.5 - Plastic.

Gears - Mitre - Module 1 - Plastic
Gears - Mitre - Module 1 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 1 - Plastic.

Gears - Mitre - Module 2.5 - Plastic
Gears - Mitre - Module 2.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 2.5 - Plastic.

Gears - Mitre - Module 2 - Plastic
Gears - Mitre - Module 2 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 2 - Plastic.

Gears - Mitre - Module 3.5 - Plastic
Gears - Mitre - Module 3.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 3.5 - Plastic.

Gears - Mitre - Module 3 - Plastic
Gears - Mitre - Module 3 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 3 - Plastic.

Gears Metric Racks

TopHide Pictures

Gear Racks - Module 0.4 - Plastic
Gear Racks - Module 0.4 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.4 - Plastic.

Gear Racks - Module 0.5 - Plastic
Gear Racks - Module 0.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Plastic.

Gear Racks - Module 1.25 - Plastic
Gear Racks - Module 1.25 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1.25 - Plastic.

Gear Racks - Module 1.5 - Plastic
Gear Racks - Module 1.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1.5 - Plastic.

Gear Racks - Module 1 - Plastic
Gear Racks - Module 1 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 1 - Plastic.

Gear Racks - Module 2.5 - Plastic
Gear Racks - Module 2.5 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 2.5 - Plastic.

Gear Racks - Module 2 - Plastic
Gear Racks - Module 2 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and nylon.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 2 - Plastic.

Gear Racks - Module 3 - Plastic
Gear Racks - Module 3 - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 3 - Plastic.

Hobby Gears

TopHide Pictures

Gear Racks - Module 0.5 - Hobby - Plastic
Gear Racks - Module 0.5 - Hobby - Plastic

Search Rating: 33%

Also see combined categories:
All Hobby Gears

POM Plastic

Plastic Only. Comes in 4 colours, blue, yellow, green, white. Inexpensive for hobby and toy use.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gear Racks - Module 0.5 - Hobby - Plastic.

Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic
Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic

Search Rating: 33%

Also see combined categories:
All Metric Mitre Gears
All Hobby Gears

POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic.

Gears Metric Worms

TopHide Pictures

Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand
Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand

Search Rating: 32%

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 6.90o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Worm Gears - Module 1.5 Series 3 - Plastic and Metallic - Right Hand.

Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand

Search Rating: 32%

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Left Hand.

Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand
Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand

Search Rating: 32%

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Worm Gears - Module 1 Series 1 - Plastic and Metallic - Right Hand.

Hobby Gears

TopHide Pictures

Gears - Crown Wheel - Module 0.5 - Hobby - Plastic
Gears - Crown Wheel - Module 0.5 - Hobby - Plastic

Search Rating: 32%

Also see combined categories:
All Hobby Gears

PCD = No. of Teeth x 0.500mm - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Crown Wheel - Module 0.5 - Hobby - Plastic.

Gears Inch Spur

TopHide Pictures

Gears - Spur - 64DP - Plastic
Gears - Spur -  64DP - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 64DP - Plastic.

Gears - Spur - 64DP - Plastic with Insert
Gears - Spur -  64DP - Plastic with Insert

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 64DP - Plastic with Insert.

Gears - Spur - 72DP - Plastic with Insert
Gears - Spur -  72DP - Plastic with Insert

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 72DP - Plastic with Insert.

Gears - Spur - 16DP - 14.5 Degree - Plastic
Gears - Spur -  16DP - 14.5 Degree - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 16DP - 14.5 Degree - Plastic.

Gears - Spur - 16DP - 20 Degree - Plastic
Gears - Spur -  16DP - 20 Degree - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon and acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 16DP - 20 Degree - Plastic.

Gears - Spur - 16DP - 20 Degree - Plastic with Stainless Core - Hubless
Gears - Spur -  16DP - 20 Degree - Plastic with Stainless Core - Hubless

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 16DP - 20 Degree - Plastic with Stainless Core - Hubless.

Gears - Spur - 24DP - 14.5 Degree - Plastic
Gears - Spur -  24DP - 14.5 Degree - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Nylon.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - 14.5 Degree - Plastic.

Gears - Spur - 24DP - 20 Degree - Plastic - Plain
Gears - Spur -  24DP - 20 Degree - Plastic - Plain

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - 20 Degree - Plastic - Plain.

Gears - Spur - 24DP - 20 Degree - Plastic with Insert
Gears - Spur -  24DP - 20 Degree - Plastic with Insert

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - 20 Degree - Plastic with Insert.

Gears - Spur - 24DP - 20 Degree - Plastic with No Hub
Gears - Spur -  24DP - 20 Degree - Plastic with No Hub

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - 20 Degree - Plastic with No Hub.

Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub
Gears - Spur -  24DP - Hub Mounting - Plastic with Aluminium Core - No Hub

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub.

Gears - Spur - 32DP - 14.5 Degree - Plastic
Gears - Spur -  32DP - 14.5 Degree - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 32DP - 14.5 Degree - Plastic.

Gears - Spur - 32DP - 20 Degree - Plastic
Gears - Spur -  32DP - 20 Degree - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 32DP - 20 Degree - Plastic.

Gears - Spur - 32DP - 20 Degree - Plastic with Insert
Gears - Spur -  32DP - 20 Degree - Plastic with Insert

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 32DP - 20 Degree - Plastic with Insert.

Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  32DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal with aluminium core. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core.

Gears - Spur - 48DP - 14.5 Degree - Plastic
Gears - Spur -  48DP - 14.5 Degree - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 48DP - 14.5 Degree - Plastic.

Gears - Spur - 48DP - 20 Degree - Plastic
Gears - Spur -  48DP - 20 Degree - Plastic

Search Rating: 29%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. Acetal and nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gears - Spur - 48DP - 20 Degree - Plastic.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120804 products in 2845 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.