Gearmotors Dc Categories
Gearmotors - DC - Low Voltage
Reversible - Low Voltage - Self Starting.
Reversible. Low Voltage. Self Starting. Housing : Plastic / Shaft : Steel.
There is also a good range of Gearmotors - DC - Low Voltage on the Small Parts and Bearings website.
Gearmotors - DC - Size 12
12mm Gearhead Body Diameter.
There is also a good range of Gearmotors - DC - Size 12 on the Small Parts and Bearings website.
Gearmotors - DC - Size 25 Low Cost
25mm Gearhead Body Diameter. 24.4mm Motor Body Diameter. Low cost. Reversible
D Shaped 4x8mm Output Shaft.
There is also a good range of Gearmotors - DC - Size 25 Low Cost on the Small Parts and Bearings website.
Motors - DC 12.0X30.0 mm
6.0V - 22800 RPM
Related Information:
There is also a good range of Motors - DC 12.0X30.0 mm on the Small Parts and Bearings website.
Motors - DC 16.6X32.0 mm
M-500T Series 1.5 to 9 VDC - 1430 to 2230 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
There is also a good range of Motors - DC 16.6X32.0 mm on the Small Parts and Bearings website.
Motors - DC 18.9X18.0X9.5 mm
M-020 Series - 1 to 3 VDC - 3700 to 11000 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft. Weight Approx 9.5 grams.
Related Information:
There is also a good range of Motors - DC 18.9X18.0X9.5 mm on the Small Parts and Bearings website.
Motors - DC 20.0X25.0 mm
1.5 to 4.5 VDC - 12,000 RPM unloaded at 3 volts
Related Information:
There is also a good range of Motors - DC 20.0X25.0 mm on the Small Parts and Bearings website.
Motors - DC 22.4X38.0 mm
Related Information:
There is also a good range of Motors - DC 22.4X38.0 mm on the Small Parts and Bearings website.
Motors - DC 23.8X30.6 mm
12 VDC - 12,300 RPM unloaded at 4.5 volts
Related Information:
There is also a good range of Motors - DC 23.8X30.6 mm on the Small Parts and Bearings website.
Motors - DC 24.3X12.35 mm
6.0 VDC - 4,900 RPM unloaded at 4.5 volts
Related Information:
There is also a good range of Motors - DC 24.3X12.35 mm on the Small Parts and Bearings website.
Motors - DC 25.0x20.1X15.1 mm
M-13 Series - 1.5 to 24 VDC - 4500 to 13760 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
There is also a good range of Motors - DC 25.0x20.1X15.1 mm on the Small Parts and Bearings website.
Motors - DC 25.0X21.0 mm
M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
There is also a good range of Motors - DC 25.0X21.0 mm on the Small Parts and Bearings website.
Motors - DC 26.9X23.8 mm
M-26 Series 1.5 to 24 VDC - 2500 to 15100 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
There is also a good range of Motors - DC 26.9X23.8 mm on the Small Parts and Bearings website.
Motors - DC 26.9X24.2X18.3 mm
MF-26 Series - 1.5 to 24 VDC - 3600 to 15900 RPM. Standard 130 Size Hobby Motor.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
There is also a good range of Motors - DC 26.9X24.2X18.3 mm on the Small Parts and Bearings website.
Motors - DC 30.5X24.2 mm
M-28 Series 1.5 to 24 VDC - 2830 to 14250 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
There is also a good range of Motors - DC 30.5X24.2 mm on the Small Parts and Bearings website.
Motors - DC 30.5X24.2X18.3 mm
MF-28 Series - 1.5 to 24 VDC - 4470 to 13430 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
There is also a good range of Motors - DC 30.5X24.2X18.3 mm on the Small Parts and Bearings website.
Motors - DC 36.0X71.0 mm
High power, high speed 11,800 RPM unloaded at 12 volts
Related Information:
There is also a good range of Motors - DC 36.0X71.0 mm on the Small Parts and Bearings website.
Motors - DC 6mm Diameter
Our smallest motors at an affordable price.
Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.
Related Information:
There is also a good range of Motors - DC 6mm Diameter on the Small Parts and Bearings website.
Motors - DC 8.0X10.0 mm
3.5V - 20500 RPM
Related Information:
There is also a good range of Motors - DC 8.0X10.0 mm on the Small Parts and Bearings website.
Plungers - Ball - Threaded - With Limit Switch
Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.
Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.
There is also a good range of Plungers - Ball - Threaded - With Limit Switch on the Small Parts and Bearings website.
Catalogues
Hardcopy, CD and PDF catalogues. Including the popular Machinery Handbook.
Information to assist in the selection of our products.
Related Information:
There is also a good range of Catalogues on the Small Parts and Bearings website.
Clutches - Magnetic Particle 24VDC
Ultrafast Responses.
The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.
Related Information:
There is also a good range of Clutches - Magnetic Particle 24VDC on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 123540 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
