Miniature Bearings Australia Pty Ltd

Gearboxes Tee Categories


Gearboxes - Tee - 100.0 x 75.0 x 44.0mm
Gearboxes - Tee - 100.0 x  75.0 x  44.0mm

Also see combined categories:
All Tee Gearboxes

Bevel Gears - 3.0 to 10.3 Nm. BLHM40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 100.0 x 75.0 x 44.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 135.0 x 100.0 x 60.0mm
Gearboxes - Tee - 135.0 x 100.0 x  60.0mm

Also see combined categories:
All Tee Gearboxes

Bevel Gears - 7.7 to 30.0 Nm. BLHM50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 135.0 x 100.0 x 60.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 170.0 x 125.0 x 80.0mm
Gearboxes - Tee - 170.0 x 125.0 x  80.0mm

Also see combined categories:
All Tee Gearboxes

Bevel Gears - 19.0 to 70.0 Nm. BLHM60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 170.0 x 125.0 x 80.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 180.0 x 140.0 x 98.0mm
Gearboxes - Tee - 180.0 x 140.0 x  98.0mm

Also see combined categories:
All Tee Gearboxes

Bevel Gears - 26.0 to 128.0 Nm. BLHM70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 180.0 x 140.0 x 98.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 55.0 x 40.0 x 25.0mm
Gearboxes - Tee -  55.0 x  40.0 x  25.0mm

Also see combined categories:
All Tee Gearboxes

Bevel Gears - 0.53 to 1.77 Nm. BLHM20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 55.0 x 40.0 x 25.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 74.0 x 55.0 x 34.0mm
Gearboxes - Tee -  74.0 x  55.0 x  34.0mm

Also see combined categories:
All Tee Gearboxes

Bevel Gears - 1.32 to 4.40 Nm. BLHM30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 74.0 x 55.0 x 34.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 100.0 x 100.0 x 60.0mm
Gearboxes - Tee - 100.0 x 100.0 x 60.0mm

Also see combined categories:
All Tee Gearboxes

BLHT50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 100.0 x 100.0 x 60.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 125.0 x 125.0 x 80.0mm
Gearboxes - Tee - 125.0 x 125.0 x 80.0mm

Also see combined categories:
All Tee Gearboxes

BLHT60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 125.0 x 125.0 x 80.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 140.0 x 140.0 x 98.0mm
Gearboxes - Tee - 140.0 x 140.0 x 98.0mm

Also see combined categories:
All Tee Gearboxes

BLHT70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 140.0 x 140.0 x 98.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 36.5 x 36.5 x 29.4mm
Gearboxes - Tee -  36.5 x  36.5 x 29.4mm

Also see combined categories:
All Tee Gearboxes

GDRAB Series. Miniature gearbox.


There is also a good range of Gearboxes - Tee - 36.5 x 36.5 x 29.4mm on the Small Parts and Bearings website.


Gearboxes - Tee - 40.0 x 40.0 x 25.0mm
Gearboxes - Tee -  40.0 x  40.0 x 25.0mm

Also see combined categories:
All Tee Gearboxes

BLHT20 Series. Miniature gearbox.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 40.0 x 40.0 x 25.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 55.0 x 55.0 x 34.0mm
Gearboxes - Tee -  55.0 x  55.0 x 34.0mm

Also see combined categories:
All Tee Gearboxes

BLHT30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 55.0 x 55.0 x 34.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 65.0 x 50.0 x 50.0mm
Gearboxes - Tee -  65.0 x  50.0 x 50.0mm

Also see combined categories:
All Tee Gearboxes

BL8 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV.

There is also a good range of Gearboxes - Tee - 65.0 x 50.0 x 50.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 70.0 x 70.0mm
Gearboxes - Tee -  70.0 x  70.0mm

Also see combined categories:
All Tee Gearboxes

Lengths from 90 to 120mm. BL15 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV.

There is also a good range of Gearboxes - Tee - 70.0 x 70.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 75.0 x 50.0 x 50.0mm
Gearboxes - Tee -  75.0 x  50.0 x 50.0mm

Also see combined categories:
All Tee Gearboxes

BL8 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV.

There is also a good range of Gearboxes - Tee - 75.0 x 50.0 x 50.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 75.0 x 75.0 x 44.0mm
Gearboxes - Tee -  75.0 x  75.0 x 44.0mm

Also see combined categories:
All Tee Gearboxes

BLHT40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Tee - 75.0 x 75.0 x 44.0mm on the Small Parts and Bearings website.


Gearboxes - Tee - 80.0 x 60.0 x 50.0mm
Gearboxes - Tee -  80.0 x  60.0 x 50.0mm

Also see combined categories:
All Tee Gearboxes

BL8 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV.

There is also a good range of Gearboxes - Tee - 80.0 x 60.0 x 50.0mm on the Small Parts and Bearings website.


You may also be interested in

Gearboxes Cross Axis


Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm
Gearboxes - Cross Axis -  18.8 x  13.5 x 12.0mm

Also see combined categories:
All Cross Axis Gearboxes

PREM6 Series.

Gearbox Case: Aluminium 6082 T6. Gears: Steel 817M40T condition.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 110 x 95 x 38mm
Gearboxes - Cross Axis - 110 x  95 x  38mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 110 x 95 x 38mm on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 130 x 110 x 46mm
Gearboxes - Cross Axis - 130 x 110 x  46mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 130 x 110 x 46mm on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 150 x 125 x 54mm
Gearboxes - Cross Axis - 150 x 125 x  54mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 150 x 125 x 54mm on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 47 x 40 x 22mm
Gearboxes - Cross Axis -  47 x  40 x  22mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 47 x 40 x 22mm on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 90 x 75 x 32mm
Gearboxes - Cross Axis -  90 x  75 x  32mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:

There is also a good range of Gearboxes - Cross Axis - 90 x 75 x 32mm on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 104 x 63 x 63
Gearboxes - Cross Axis - 104 x  63 x  63

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 15mm Bores. E40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

There is also a good range of Gearboxes - Cross Axis - 104 x 63 x 63 on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 130 x 80 x 80
Gearboxes - Cross Axis - 130 x  80 x  80

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 20mm Bores. E50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

There is also a good range of Gearboxes - Cross Axis - 130 x 80 x 80 on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 150 x 96 x 96 A
Gearboxes - Cross Axis - 150 x  96 x  96 A

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

There is also a good range of Gearboxes - Cross Axis - 150 x 96 x 96 A on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 52 x 34 x 34
Gearboxes - Cross Axis -  52 x  34 x  34

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 6mm Bores. E20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel: Aluminium Bronze (CA104 / AB2). Circlips: Steel (not plated). Bearing: Steel 2RS (Rubber seals fitted).

Related Information:

There is also a good range of Gearboxes - Cross Axis - 52 x 34 x 34 on the Small Parts and Bearings website.


Gearboxes - Cross Axis - 78 x 48 x 48
Gearboxes - Cross Axis -  78 x  48 x  48

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 10mm Bores. E30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

There is also a good range of Gearboxes - Cross Axis - 78 x 48 x 48 on the Small Parts and Bearings website.


Gearbox Output Shafts


Gearboxes - Output Shafts - For P - PF and FF Type Worm Reducers
Gearboxes - Output Shafts - For P - PF and FF Type Worm Reducers

Also see combined categories:
All Gearbox Shafts

For use in Cross Axis gearboxes with bores. P, PF and FF Series.

Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).

Related Information:

There is also a good range of Gearboxes - Output Shafts - For P - PF and FF Type Worm Reducers on the Small Parts and Bearings website.


Gearboxes Inline


Gearboxes - Inline - 112.0 x 52.0 Low Backlash
Gearboxes - Inline - 112.0 x  52.0 Low Backlash

Also see combined categories:
All Inline Gearboxes

Taper Gears - Weight: 1.50kg. TG112 Series.

Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: Less than 8.1 arc/min at output. Max Input Speed: 3000 Rpm.

Related Information:

There is also a good range of Gearboxes - Inline - 112.0 x 52.0 Low Backlash on the Small Parts and Bearings website.


Gearboxes Right Angle


Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x 30.5 x 18.7mm
Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x  30.5 x 18.7mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.

1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2o. Approx Max Temperature 80 oC. Suitable for manual and short term drive application.

There is also a good range of Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x 30.5 x 18.7mm on the Small Parts and Bearings website.


Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x 44.0 x 44.0mm
Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x  44.0 x  44.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x 44.0 x 44.0mm on the Small Parts and Bearings website.


Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x 60.0 x 60.0mm
Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x  60.0 x  60.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 5 Nm-15 Nm ratios 6:1 to 24:1. BLN30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x 60.0 x 60.0mm on the Small Parts and Bearings website.


Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x 80.0 x 80.0mm
Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x  80.0 x  80.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x 80.0 x 80.0mm on the Small Parts and Bearings website.


Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm
Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm on the Small Parts and Bearings website.


Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm
Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm on the Small Parts and Bearings website.


Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm
Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

There is also a good range of Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm on the Small Parts and Bearings website.


Gearboxes Inline


Gearboxes - Inline - 114 x 90mm
Gearboxes - Inline - 114 x  90mm

Also see combined categories:
All Inline Gearboxes

NT121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 114 x 90mm on the Small Parts and Bearings website.


Gearboxes - Inline - 120 x 103mm
Gearboxes - Inline - 120 x 103mm

Also see combined categories:
All Inline Gearboxes

NTB121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 1.63/3.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 120 x 103mm on the Small Parts and Bearings website.


Gearboxes - Inline - 120 x 120mm
Gearboxes - Inline - 120 x 120mm

Also see combined categories:
All Inline Gearboxes

NT122 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 120 x 120mm on the Small Parts and Bearings website.


Gearboxes - Inline - 120 x 160mm
Gearboxes - Inline - 120 x 160mm

Also see combined categories:
All Inline Gearboxes

NTB122 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 4/5kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 120 x 160mm on the Small Parts and Bearings website.


Gearboxes - Inline - 50 x 50mm
Gearboxes - Inline -  50 x  50mm

Also see combined categories:
All Inline Gearboxes

J53 Series.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 50 x 50mm on the Small Parts and Bearings website.


Gearboxes - Inline - 60 x 56mm
Gearboxes - Inline -  60 x  56mm

Also see combined categories:
All Inline Gearboxes

NT61 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 60 x 56mm on the Small Parts and Bearings website.


Gearboxes - Inline - 60 x 70mm
Gearboxes - Inline -  60 x  70mm

Also see combined categories:
All Inline Gearboxes

NT62 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 60 x 70mm on the Small Parts and Bearings website.


Gearboxes - Inline - 60 x 84mm
Gearboxes - Inline -  60 x  84mm

Also see combined categories:
All Inline Gearboxes

NT63 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 60 x 84mm on the Small Parts and Bearings website.


Gearboxes - Inline - 90 x 74mm
Gearboxes - Inline -  90 x  74mm

Also see combined categories:
All Inline Gearboxes

NT91 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 90 x 74mm on the Small Parts and Bearings website.


Gearboxes - Inline - 90 x 94mm
Gearboxes - Inline -  90 x  94mm

Also see combined categories:
All Inline Gearboxes

NT92 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 90 x 94mm on the Small Parts and Bearings website.


Gearboxes - Inline - 27 x 45mm
Gearboxes - Inline -  27 x  45mm

Also see combined categories:
All Inline Gearboxes

J27 Series. Miniature gearbox.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 60g. Backlash: Depends on ratio. Hours Life: 12000 hr. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 27 x 45mm on the Small Parts and Bearings website.


Gearboxes - Inline - 50 x 40mm Hi Torque
Gearboxes - Inline -  50 x  40mm Hi Torque

Also see combined categories:
All Inline Gearboxes

JHD51 Series.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: JHD51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 50 x 40mm Hi Torque on the Small Parts and Bearings website.


Gearboxes - Inline - 63 x 40mm
Gearboxes - Inline -  63 x  40mm

Also see combined categories:
All Inline Gearboxes

J64 Series.

End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

There is also a good range of Gearboxes - Inline - 63 x 40mm on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122528 products in 2632 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122528 products in 2632 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.