Engineering And Hobby Rod Categories
Rod - Round - Aluminium
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Aluminium.
Rod - Round - Brass
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Brass.
Rod - Round - Stainless Steel
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Stainless Steel.
Rod - Round - Soft Metal Packs
For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,
300mm lengths for general hobby applications. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft.
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Soft Metal Packs.
Rod - Round - Nylon
High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Nylon.
Rod - Round - PTFE
Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.
Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - PTFE.
Rod - Round - Urethane
Hard urethane rubber compound. Machinable.
Length +/- 3.2mm. Diameter +/- 2 percent.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Urethane.
Rod - Round - Carbon Fibre
High impact light weight carbon fibre for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Carbon Fibre.
Rod - Round - Polyester PETP
High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Rod - Round - Polyester PETP.
Rod - Round - Sintered Bronze
Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.
Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.
Related Information:
Books - Engineering
Machinery handbook contains standards, materials and other general engineering information.
Engineers Black Book, Fasteners Black Book, Machinery Handbook, Shop Reference.
Housings - Bearing - Pillow Block - Miniature
Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings
No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Housings - Bearing - Pillow Block - Miniature.
Shim - Tin
Precision steel shim sheet. Very thin to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
You may also like to check if Hobby and Engineering Supplies list a range of Shim - Tin.
Circlips - External - Round Section
DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA).
Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.
Related Information:
Shim - Plastic
Easy to cut - colour coded - plastic shim sheets. Precision thicknesses.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Made from sturdy polyester.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Shim - Plastic.
Circlips - Internal - Round Section
Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA).
Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.
Related Information:
Shim and Foil - Copper
Precision copper shim sheet. Very thin foil to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
You may also like to check if Hobby and Engineering Supplies list a range of Shim and Foil - Copper.
Shim and Foil - Brass
Precision brass shim sheet. From very thin foil to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Includes sheets and rolls. See Brass - Strip for thin strips.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Shim and Foil - Brass.
Shim and Foil - Steel
Precision shim sheet. Cold rolled steel. Very thin to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Shim and Foil - Steel.
Bushes - Stainless Steel and PTFE - Flanged
Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.
Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.
Related Information:
Bushes - Stainless Steel and PTFE - Unflanged
Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.
Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.
Related Information:
Shim and Foil - Aluminium
Precision aluminium shim sheet. Includes listing on 6061-T6 Aluminium Sheet. Very thin to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Coloured shim is anodised. The colour is not removable. The colour is for identification purposes only.
You may also like to check if Hobby and Engineering Supplies list a range of Shim and Foil - Aluminium.
Shim and Foil - Stainless Steel
Precision stainless shim sheet. Very thin foil to thick sizes. Includes 416, 303 and 316 grades.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Shim and Foil - Stainless Steel.
Joints - Tee - Tubing and Rod
Inexpensive nylon joiners for hobby tubing and rod
You may also like to check if Hobby and Engineering Supplies list a range of Joints - Tee - Tubing and Rod.
Bar - H Section - Brass
You may also like to check if Hobby and Engineering Supplies list a range of Bar - H Section - Brass.
Hexagonal Bar - Brass
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.
Rectangular Bar - Aluminium
Thin and thick Aluminum strip and rectangular profiles
Small sizes may not be perfectly straight.
You may also like to check if Hobby and Engineering Supplies list a range of Rectangular Bar - Aluminium.
Square Bar - Brass
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.
You may also like to check if Hobby and Engineering Supplies list a range of Square Bar - Brass.
Square Bar - Urethane
Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.
Hexagonal Bar - 303 Stainless
Corrosion resistant 303 grade stainless.
Saw Cut Ends. Small A/F sizes may not be perfectly straight.
Hexagonal Bar - Titanium Ti-Gr2 - Drawn
Cold rolled and hot drawn hex bar to ASTM B348
Saw Cut Ends.
Tool Steel - 496 Oil Hardening - Flat Stock
General purpose tool steel with good wear resistance, durability and machinability
Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).
RC Spare Parts - Venom
Venom Hobby Parts listed by description. Parts for 1/10 crawler, Baja, 1/8 scale cars, Beacon, Corsair, CPR Creeper, D Micro, DXL, EKOS, EPO, GPV-1, MINIZ, Island Hopper, King, Segad, KOS, KWA, M05, ME-109, MTT, Night Ranger 3D, Outlaw RC, Ozone Heli
Parts also to suit P-51, Texan, Savage, Scorpion AX10, Skywolf 3CH, Strait Jacket, TraXXas, TRX Slash. Ailerons fittings, Anti-rotation arm, A arms, Axle, Bag, Ball end, batteries assembleys, battery(bags, bars, box, case, charger, holder), beadlock, bearing kits, retainers and set. bell crank, blade grips and sets, body posts, bolt, bracket, bulkhead, cables, camber gauge, canopy, caps, carburettor, charger, chassis covers and plates. Cockpit cover, Collars, connectors, control links, control links, tray and units, coupler, cowl, crankcase, crankshaft, cylinder, Damper, decal set, differential (case, housing and system). Dig unit, drive (belt and dog), driveline, electronics unit, elevator, e-ring, ESC, exhaust (coupler, deflector and pipe), fail safes, feathering spindle.
You may also like to check if Hobby and Engineering Supplies list a range of RC Spare Parts - Venom.
Shafting - Ground - Hobby - Steel
Silversteel shafting for hobbies. Not suitable for precision bearings.
Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Shafting - Ground - Hobby - Steel.
Gearmotors - Basic - Hobby - 12.1mm Diameter
Small light weight geared motors used in toys and small solar applications
NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.
You may also like to check if Hobby and Engineering Supplies list a range of Gearmotors - Basic - Hobby - 12.1mm Diameter.
Strip - Soft Metal Packs
For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
You may also like to check if Hobby and Engineering Supplies list a range of Strip - Soft Metal Packs.
Hobby - Nut Packs
Hobby Nut Packs. Includes Dubro Range
You may also like to check if Hobby and Engineering Supplies list a range of Hobby - Nut Packs.
Hobby Gears - Spur - 48DP
A small selection of popular 48DP Plastic/ Metal Pinion and Spur gears
See main listings under Gears for sizes not listed here. To work out the pitch diameter of a 48DP spur gear, divide multiply the no of teeth by 0.52917.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Hobby Gears - Spur - 48DP.
Hobby - Screw and Nut Combo Packs
Selection of Screw and Nut Combos. Includes Dubro Range
You may also like to check if Hobby and Engineering Supplies list a range of Hobby - Screw and Nut Combo Packs.
Hobby - Screw Packs
Hobby Screw Packs. Includes Dubro Range
You may also like to check if Hobby and Engineering Supplies list a range of Hobby - Screw Packs.
Hobby - Washer Packs
Hobby Washer Packs. Includes Dubro Range
You may also like to check if Hobby and Engineering Supplies list a range of Hobby - Washer Packs.
Accessories - Hobby - Car and Buggy
Generic Parts. Specific model parts may also be found by typing the model number into the search box. Fail safes, aerials, heat sinks, body clips, tune pipe, clutch bell, bump start, engine break stand, engine fans, antenna tubes and tire warmers.
Includes Kyosho pull starts.
You may also like to check if Hobby and Engineering Supplies list a range of Accessories - Hobby - Car and Buggy.
Wheels - Hobby - General
Includes wheels for robots and general hobby applications
Also see tracks for Robotic applications.
Related Information:
You may also like to check if Hobby and Engineering Supplies list a range of Wheels - Hobby - General.
Rims - Hobby - Car 1-10 - Off Road - Front - Plastic
Rims for RC wheels
You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Off Road - Front - Plastic.
Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic
Rims for RC wheels
You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic.
Rims - Hobby - Car 1-10 - Road and Drift - Plastic
Rims for RC wheels
You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car 1-10 - Road and Drift - Plastic.
Rims - Hobby - Car and Buggy 1-8 - Plastic
Rims for RC wheels
You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Car and Buggy 1-8 - Plastic.
Rims - Hobby - Monster Truck 1-10 - Plastic
Rims for RC wheels
You may also like to check if Hobby and Engineering Supplies list a range of Rims - Hobby - Monster Truck 1-10 - Plastic.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
