End of line bulk specials categories
Bearings - Spherical OD
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems.
Related Information:
There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.
Bearings - Chamfered Edges
Chamfered edge bearings for Linear Guide Systems and pushbikes
Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.
Related Information:
There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.
Bearings - Gothic Groove Profile OD
Bearings with a Gothic Groove in OD. Round Track Rolling Applications.
Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.
Related Information:
There is also a good range of Bearings - Gothic Groove Profile OD on the Small Parts and Bearings website.
Tools - Pin Wrench
Used on nuts with two holes in the face.
Constructed of special blued steel.
There is also a good range of Tools - Pin Wrench on the Small Parts and Bearings website.
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Screws - Pan Head - PEEK - Philips
Machine screws. PEEK is a super-engineering thermoplastic with special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of VitreTM.
Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance. Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180o Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0. Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm. For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.
Related Information:
There is also a good range of Screws - Pan Head - PEEK - Philips on the Small Parts and Bearings website.
Knobs - Round - Male - Soft
Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud.
Related Information:
There is also a good range of Knobs - Round - Male - Soft on the Small Parts and Bearings website.
Bearings - U Groove Profile OD
Special OD Bearings.
Contact us for tolerances.
Related Information:
There is also a good range of Bearings - U Groove Profile OD on the Small Parts and Bearings website.
Mounts - Compression
Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.
Made with durable oil and ozone resistant neoprene. No special tools required for installation.
Related Information:
There is also a good range of Mounts - Compression on the Small Parts and Bearings website.
Bearings - Square Groove Profile OD
Special bearings. Not readily available.
There is also a good range of Bearings - Square Groove Profile OD on the Small Parts and Bearings website.
Bearings - Vee Groove Profile OD
Special OD Bearings.
Related Information:
There is also a good range of Bearings - Vee Groove Profile OD on the Small Parts and Bearings website.
Rod - Drill Blanks
Made of hardened high speed steel.
Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.
There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.
Inserts - Thread Repair - EZ-Lok - Selection Kits
Contains a selection of E-Z Lok inserts
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
There is also a good range of Inserts - Thread Repair - EZ-Lok - Selection Kits on the Small Parts and Bearings website.
Special Items Listed by Manufacturer
Specially sourced items listed by manufacturer.
There is also a good range of Special Items Listed by Manufacturer on the Small Parts and Bearings website.
Bearings - Acetal - Special Purpose
Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems
Related Information:
There is also a good range of Bearings - Acetal - Special Purpose on the Small Parts and Bearings website.
Bearings - Acetal - Special Types
Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.
See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.
There is also a good range of Bearings - Acetal - Special Types on the Small Parts and Bearings website.
Bearings - Polypropylene - Special Types
Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.
See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.
There is also a good range of Bearings - Polypropylene - Special Types on the Small Parts and Bearings website.
Mounts - Buffer - Special Purpose
Vibration dampening
Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).
Related Information:
There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.
Bearings - Ball - Anti Corrosion - Special Stainless
Higher corrosion resistance than 440C stainless - HRC59 Hardness - Same or higher load than 440C
Ideal for applications with salt spray or chemicals in the pH range 3 to 12. ISC CASSTOP design with special TBN-6H stainless steel. Other sizes available on request.
Related Information:
There is also a good range of Bearings - Ball - Anti Corrosion - Special Stainless on the Small Parts and Bearings website.
Bearings - Acetal - MRI Table
Special acetal bearings for MRI table wheels
There is also a good range of Bearings - Acetal - MRI Table on the Small Parts and Bearings website.
Bearings - Ball - 4 Point Contact
4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.
Related Information:
There is also a good range of Bearings - Ball - 4 Point Contact on the Small Parts and Bearings website.
Bearings - Acetal - Disk Cleaning Applications
Special acetal bearings for disk cleaning
Related Information:
There is also a good range of Bearings - Acetal - Disk Cleaning Applications on the Small Parts and Bearings website.
Bearings - Ball - AISI304 Stainless Steel
Corrosion and Heat resistance - Non Magnetic - Non Hardenable. Quality Japanese manufacture.
Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm up to 10mm bore, Width +0/- 0.12 mm. Mid range speed and load between 304 stainless and 440C stainless. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages, balls, races and shields from AISI 304 Stainless Steel.
Related Information:
Bearings - Ball - 17-4PH Stainless Steel
Excellent Corrosion and Heat resistance - Hardness is between 300 grades and 400 grades. SUS630 grade.
Standard bearing tolerances. Low load, low speed applications requiring maximum corrosion resistance. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages and shields from AISI 304 Stainless Steel. Balls and races from SUS630 (17-4PH) Stainless Steel.
Related Information:
O-Rings - Dental
Special Orings for Dental Applications.
Related Information:
There is also a good range of O-Rings - Dental on the Small Parts and Bearings website.
Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose
Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.
Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.
There is also a good range of Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose on the Small Parts and Bearings website.
Screws - Security - Button - Socket
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Button - Socket on the Small Parts and Bearings website.
Screws - Security - Cap - Socket
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Cap - Socket on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Double Row - Open
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Double Row - Open on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Open
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.
Screws - Security - Socket - Countersunk - Stainless
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Socket - Countersunk - Stainless on the Small Parts and Bearings website.
Screws - Security - Socket - Countersunk - Zinc Plated
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Socket - Countersunk - Zinc Plated on the Small Parts and Bearings website.
Shafting - Ground - Hobby - Steel
Silversteel shafting for hobbies. Not suitable for precision bearings.
Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.
Related Information:
There is also a good range of Shafting - Ground - Hobby - Steel on the Small Parts and Bearings website.
Screws - Security - Post Combi Square - Pan Head - Super Zinc
Each 200 pack comes with a Post Combination Driver Bit. Metric only.
Use special tool listed under Screws - Securty - Socket - Tools.
Related Information:
There is also a good range of Screws - Security - Post Combi Square - Pan Head - Super Zinc on the Small Parts and Bearings website.
Pins - Clevis - Stainless Steel 300 Grade - Groove Locking
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Grooved end to suit retaining clip instead of pin.
Related Information:
There is also a good range of Pins - Clevis - Stainless Steel 300 Grade - Groove Locking on the Small Parts and Bearings website.
Gear Racks - Flexible
Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.
20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.
There is also a good range of Gear Racks - Flexible on the Small Parts and Bearings website.
Clamp Kits - Timing Belt
Used for locking the ends of timing belt lengths used in linear applications
Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.
Related Information:
There is also a good range of Clamp Kits - Timing Belt on the Small Parts and Bearings website.
Pins - Clevis - Zinc Plated - Groove Locking
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. Grooved end to suit retaining clip instead of pin.
Related Information:
There is also a good range of Pins - Clevis - Zinc Plated - Groove Locking on the Small Parts and Bearings website.
Slides - Linear - Non Recirculating Ball - Standard
The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.
There is also a good range of Slides - Linear - Non Recirculating Ball - Standard on the Small Parts and Bearings website.
Rings - Retaining - PR Type Internal - For Linear Bearings
Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.
There is also a good range of Rings - Retaining - PR Type Internal - For Linear Bearings on the Small Parts and Bearings website.
Slides - Linear - Recirculating Ball - Standard
The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.
There is also a good range of Slides - Linear - Recirculating Ball - Standard on the Small Parts and Bearings website.
Linear - Assemblies - Ball Slide - Precision
These precision ball slides have a typical coefficient of friction of 0.003 and provide straight line accuracy of 0.0005mm per mm of travel.
At load capacity a life of 250 million mm of travel can be expected. The expected life at half load capacity is 2.5 billion mm. Factory preload adjustment prevents sideplay and backlash. Lightweight aluminium carriage and base with high load capacity. Four tapped and threaded carriage holes and counterbored base holes simplify installation and component mounting. Long life, self cleaning ball bearing needs no lubrication. Positional repeatability 0.005mm. Clear anodised finish.
There is also a good range of Linear - Assemblies - Ball Slide - Precision on the Small Parts and Bearings website.
Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel
Easy to install with a standard tap, bolt and wrench.
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel on the Small Parts and Bearings website.
Inserts - Thread Repair - EZ-Lok - Solid Stainless Steel
Easy to install with a standard tap, bolt and wrench.
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Simply drill and tap the hole to suit the external thread. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid Stainless Steel on the Small Parts and Bearings website.
Clamps - Timing Belt
Used for locking the ends of timing belt lengths used in reciprocating applications
Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.
Related Information:
There is also a good range of Clamps - Timing Belt on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated on the Small Parts and Bearings website.
Anchors - Spring - Steel
An economical way to secure the ends of extension springs, and provide easy adjustment.
C-12114 Steel with Black Oxide Finsh.
There is also a good range of Anchors - Spring - Steel on the Small Parts and Bearings website.
Pins - Dowel - Standard - Chamfered End
Precision Dowel Pins - Based on DIN6325, ISO2338
Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.
Related Information:
There is also a good range of Pins - Dowel - Standard - Chamfered End on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Catalogue
Contact Us
Charity
Dental Bearings
Distributor Locations
Dowel Pins
Downloadable PDF Catalogue Ball Lock Pins
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Circlips
Downloadable PDF Catalogue Clevis Pins
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Disc Springs
Downloadable PDF Catalogue Dowel Pins
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue Hammer Drive Pins
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Key Steel
Downloadable PDF Catalogue Knobs
Downloadable PDF Catalogue Leveling Mounts
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue O-Rings
Downloadable PDF Catalogue Pins
Downloadable PDF Catalogue Plastic Bearings
Downloadable PDF Catalogue Polyvee Belts and Pulleys
Downloadable PDF Catalogue Precision Shim Washers
Downloadable PDF Catalogue Push On and Push In Rings
Downloadable PDF Catalogue Rod & Tube
Downloadable PDF Catalogue Roll Pins
Downloadable PDF Catalogue Shaft Collars
Downloadable PDF Catalogue Shim Sheet
Downloadable PDF Catalogue Shoulder Screws
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Snap Rings
Downloadable PDF Catalogue Socket Set Screws
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Spring Steel Strip
Downloadable PDF Catalogue Springs
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Taper Pins
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Catalogue Thumb Screws and Nuts
Downloadable PDF Catalogue Timing Belts
Downloadable PDF Catalogue Timing Pulley Stock
Downloadable PDF Catalogue Timing Pulleys
Downloadable PDF Catalogue Vibration Mounts
Downloadable PDF Catalogue Washers
Downloadable PDF Catalogue Wave Washers
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Anderton Circlips
Downloadable PDF Cross Reference Barden Bearings
Downloadable PDF Cross Reference Essentra
Downloadable PDF Cross Reference Flocast
Downloadable PDF Cross Reference K&S Metals
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference Nordex
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Ondrives
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Seeger Circlips
Downloadable PDF Cross Reference Sintered Bronze
Downloadable PDF Cross Reference Small Parts Inc
Downloadable PDF Cross Reference Timing Belts and Pulleys
Freight Rates and Shipping Times
Frequently Asked Questions
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Satellite Reaction Wheels
Shipping Rates and Times
Technical
Terms
5 Axis Machine Tool Bearings
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 131506 products in 2122 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
