Miniature Bearings Australia Pty Ltd

Dual Vee Tracks With Mounting Holes Steel Categories


Dual Vee Bearings


Dual Vee - Tracks with Mounting Holes - Steel
Dual Vee - Tracks with Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks with Mounting Holes - Steel on the Small Parts and Bearings website.


Dual Vee - Tracks without Mounting Holes - Steel
Dual Vee - Tracks without Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks without Mounting Holes - Steel on the Small Parts and Bearings website.


Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks with Mounting Holes - Stainless Steel on the Small Parts and Bearings website.


Dual Vee - Tracks without Mounting Holes - Stainless Steel
Dual Vee - Tracks without Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

There is also a good range of Dual Vee - Tracks without Mounting Holes - Stainless Steel on the Small Parts and Bearings website.


Springs - Constant Force
Springs - Constant Force


301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Related Information:

There is also a good range of Springs - Constant Force on the Small Parts and Bearings website.


Tie Downs - D-Ring - Plated Steel
Tie Downs - D-Ring - Plated Steel

Also see combined categories:
All D Ring Tie Downs

Zinc plated steel with 6.35mm mounting holes. Ultimate load 660 kg.


There is also a good range of Tie Downs - D-Ring - Plated Steel on the Small Parts and Bearings website.


Bumpers - Square and Rectangle - Steel Plated - Neoprene
Bumpers - Square and Rectangle - Steel Plated - Neoprene

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.


There is also a good range of Bumpers - Square and Rectangle - Steel Plated - Neoprene on the Small Parts and Bearings website.


Bumpers - Square and Rectangle - Steel Plated - Urethane
Bumpers - Square and Rectangle - Steel Plated - Urethane

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Urethane bonded to steel plate.


There is also a good range of Bumpers - Square and Rectangle - Steel Plated - Urethane on the Small Parts and Bearings website.


Bumpers - Square and Rectangle
Bumpers - Square and Rectangle

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene only, no steel plate.


There is also a good range of Bumpers - Square and Rectangle on the Small Parts and Bearings website.


Rail Systems - Miniature Profile
Rail Systems - Miniature Profile

Also see combined categories:
All Linear Slides

Ideal for precision applications where mounting space is limited

Gothic arch grooves at raceway contacts enables slide to sustain loads & movement from any direction. Made from stainless steel or plastic for corrosion resistance. End caps have oil holes for easy relubrication.

There is also a good range of Rail Systems - Miniature Profile on the Small Parts and Bearings website.


Catches - Straight Loop
Catches - Straight Loop


High strength overcentre catch and strike. Economical and compact. Available in plain steel, zinc plated or 304 stainless steel. With or without mounting holes. Strike is included. Dimensions are as mounted.

Tension can be increased by increasing distance between catch and strike.

There is also a good range of Catches - Straight Loop on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Mounting Plate - Steel
Plungers - Indexing - Locking - With Mounting Plate - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.

There is also a good range of Plungers - Indexing - Locking - With Mounting Plate - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Plungers - Indexing - Non Locking - With Mounting Plate - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel.

There is also a good range of Plungers - Indexing - Non Locking - With Mounting Plate - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Cam Action Mounting Blocks
Plungers - Indexing - Cam Action Mounting Blocks


Used with cam action indexing plungers

Mounting blocks are made from steel with black oxide finish.

Related Information:

There is also a good range of Plungers - Indexing - Cam Action Mounting Blocks on the Small Parts and Bearings website.


Gears - Spur - 24DP - Hub Mounting - Stainless
Gears - Spur -  24DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 24DP - Hub Mounting - Stainless on the Small Parts and Bearings website.


Gears - Spur - 32DP - Hub Mounting - Stainless
Gears - Spur -  32DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 32DP - Hub Mounting - Stainless on the Small Parts and Bearings website.


Ties - Cable - With Mounting Holes
Ties - Cable - With Mounting Holes

Also see combined categories:
All Cable Ties

Cable ties with screw mounting holes.


There is also a good range of Ties - Cable - With Mounting Holes on the Small Parts and Bearings website.


Switches - Rocker
Switches - Rocker

Also see combined categories:
All Switches

20mm Diameter mounting hole 12V/10amp. On/Off Round Switches with Housing. Illuminates when turned to on position.

Switchs are rated at 10amp @ 600VAC with finger safe screw terminals.

There is also a good range of Switches - Rocker on the Small Parts and Bearings website.


Tie Downs - D-Ring - Forged with Bolt-on Bracket
Tie Downs - D-Ring - Forged with Bolt-on Bracket

Also see combined categories:
All D Ring Tie Downs

C-1045 steel with bolt-on mounting bracket


There is also a good range of Tie Downs - D-Ring - Forged with Bolt-on Bracket on the Small Parts and Bearings website.


Tie Downs - D-Ring - Forged with Weld-on Bracket
Tie Downs - D-Ring - Forged with Weld-on Bracket

Also see combined categories:
All D Ring Tie Downs

C-1045 steel with weld-on mounting bracket


There is also a good range of Tie Downs - D-Ring - Forged with Weld-on Bracket on the Small Parts and Bearings website.


Linear Slide Assemblies - Ball - Pre-Loaded - Compliant
Linear Slide Assemblies - Ball - Pre-Loaded - Compliant

Also see combined categories:
All Linear Slide Assemblies

Pre-loaded ball slides provide an acceptable level of accuracy of 0.001mm per mm for most linear motion applications. Considerably lower cost than crossed roller slides.

Uses a conventional hardened steel rod raceway and balls. Incorporates an elastomer spine and shock absorbing backup gib. Provides even and continuous preload, whilst minimising the effects of impact and shock. Tolerant to contamination and can operate of millions of cycles without lubrication. 8-32 UNC mounting holes.

There is also a good range of Linear Slide Assemblies - Ball - Pre-Loaded - Compliant on the Small Parts and Bearings website.


Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent
Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Full extension. Includes 32mm hole pattern as well as traditional hole pattern. Designed for units up to 760mm wide.

There is also a good range of Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent on the Small Parts and Bearings website.


Dual Vee - Adaptor Bushings
Dual Vee - Adaptor Bushings

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller bushings.

Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned.

Related Information:

There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.


Cam Followers - Roller Type - Miniature - Standard
Cam Followers - Roller Type - Miniature - Standard

Also see combined categories:
All Cam Followers

Small carbon steel roller type cam followers.

Carbon Steel - Nitrile Rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

There is also a good range of Cam Followers - Roller Type - Miniature - Standard on the Small Parts and Bearings website.


Mounts - Leveling - Machine - Cushioned
Mounts - Leveling - Machine - Cushioned

Also see combined categories:
All Mounting Feet

Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.

There is also a good range of Mounts - Leveling - Machine - Cushioned on the Small Parts and Bearings website.


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.

There is also a good range of Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole on the Small Parts and Bearings website.


Cam Followers - Roller Type - Stainless Steel
Cam Followers - Roller Type - Stainless Steel

Also see combined categories:
All Cam Followers

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

There is also a good range of Cam Followers - Roller Type - Stainless Steel on the Small Parts and Bearings website.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel on the Small Parts and Bearings website.


Linear Slides - MiniVee - Track - Hardened Steel
Linear Slides - MiniVee - Track - Hardened Steel


Use with MiniVee carriages and support washers

Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Double edged track from 165 to 927mm. Carriages and track sold separately.

Related Information:

There is also a good range of Linear Slides - MiniVee - Track - Hardened Steel on the Small Parts and Bearings website.


Linear Slides - MiniVee - Track - Unhardened Steel
Linear Slides - MiniVee - Track - Unhardened Steel


Use with MiniVee carriages and support washers

Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Double edged track from 165 to 927mm. Carriages and track sold separately.

Related Information:

There is also a good range of Linear Slides - MiniVee - Track - Unhardened Steel on the Small Parts and Bearings website.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:

There is also a good range of Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel on the Small Parts and Bearings website.


Slides - Drawer - Medium Duty - Easy Disconnect
Slides - Drawer - Medium Duty - Easy Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Rail mounting. Hold in detent. Full extension. 13.5mm Side space. Includes 32mm hole pattern as well as traditional hole pattern.

There is also a good range of Slides - Drawer - Medium Duty - Easy Disconnect on the Small Parts and Bearings website.


Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

There is also a good range of Mounts - Leveling - Hygienic - Anchoring - One Hole on the Small Parts and Bearings website.


Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.

There is also a good range of Mounts - Leveling - Hygienic - Anchoring - Two Hole on the Small Parts and Bearings website.


Mounts - Leveling - Nylon - Socket Type - No Lag Holes
Mounts - Leveling - Nylon - Socket Type - No Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel socket internal threads. Use your own custom thread length. Adjusters.


Related Information:

There is also a good range of Mounts - Leveling - Nylon - Socket Type - No Lag Holes on the Small Parts and Bearings website.


Mounts - Leveling - Nylon - Studded Type - With Lag Holes
Mounts - Leveling - Nylon - Studded Type - With Lag Holes

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Steel and stainless steel threads. Adjusters.


There is also a good range of Mounts - Leveling - Nylon - Studded Type - With Lag Holes on the Small Parts and Bearings website.


Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

There is also a good range of Gearheads - Inline - Planetary - Size 17 - Precision on the Small Parts and Bearings website.


Bearings - Self Clinching - Miniature - Self Aligning
Bearings - Self Clinching - Miniature - Self Aligning

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.

There is also a good range of Bearings - Self Clinching - Miniature - Self Aligning on the Small Parts and Bearings website.


Feet - Mounting - Bonded Neoprene - No Stud
Feet - Mounting - Bonded Neoprene - No Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.


There is also a good range of Feet - Mounting - Bonded Neoprene - No Stud on the Small Parts and Bearings website.


Feet - Mounting - Bonded Neoprene - With Stud
Feet - Mounting - Bonded Neoprene - With Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.


There is also a good range of Feet - Mounting - Bonded Neoprene - With Stud on the Small Parts and Bearings website.


Shock Absorbers - Mounting Blocks
Shock Absorbers - Mounting Blocks

Also see combined categories:
All Shock Absorbers


There is also a good range of Shock Absorbers - Mounting Blocks on the Small Parts and Bearings website.


Linear Slides - MiniVee - Carriages
Linear Slides - MiniVee - Carriages


Use with MiniVee tracks and support washers

Low profile miniature linear slide system ideal for semi-conductor, laboratory, medical and packaging applications. Non actuated MiniVee linear slide consists of one or more 6061-T6 anodised aluminium wheel carriages with Dual Vee integrated wheels. Steel wheel carriages support loads to 50kg whilst the polymer wheel carriages support loads to 6kg. Carriages and track sold separately.

Related Information:

There is also a good range of Linear Slides - MiniVee - Carriages on the Small Parts and Bearings website.


Gears - Spur - 120DP - Hub Mounting - Aluminium
Gears - Spur - 120DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 120DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.


Gears - Spur - 120DP - Hub Mounting - Stainless
Gears - Spur - 120DP - Hub Mounting - Stainless

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 120DP - Hub Mounting - Stainless on the Small Parts and Bearings website.


Gears - Spur - 24DP - Hub Mounting - Aluminium
Gears - Spur -  24DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 24DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.


Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub
Gears - Spur -  24DP - Hub Mounting - Plastic with Aluminium Core - No Hub

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub on the Small Parts and Bearings website.


Gears - Spur - 32DP - Hub Mounting - Aluminium
Gears - Spur -  32DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 32DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.


Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  32DP - Hub Mounting - Plastic with Aluminium Core

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal with aluminium core. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core on the Small Parts and Bearings website.


Gears - Spur - 48DP - Hub Mounting - Aluminium
Gears - Spur -  48DP - Hub Mounting - Aluminium

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 48DP - Hub Mounting - Aluminium on the Small Parts and Bearings website.


Gears - Spur - 48DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  48DP - Hub Mounting - Plastic with Aluminium Core

Also see combined categories:
All Imperial Spur Gears
All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - 48DP - Hub Mounting - Plastic with Aluminium Core on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122228 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122228 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.