Miniature Bearings Australia Pty Ltd

Coastal In Shore Special 153h Daiwa Parts Categories


Fishing Reel Parts


Coastal In Shore Special 153H Daiwa Parts
Coastal In Shore Special 153H Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Coastal In Shore Special 153H Daiwa Parts on the Small Parts and Bearings website.


Knobs - Round - Female - Soft
Knobs - Round - Female - Soft

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Brass tapped insert.

There is also a good range of Knobs - Round - Female - Soft on the Small Parts and Bearings website.


Knobs - Round - Male - Soft
Knobs - Round - Male - Soft

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud.

There is also a good range of Knobs - Round - Male - Soft on the Small Parts and Bearings website.


AR2000 Daiwa Parts
AR2000 Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of AR2000 Daiwa Parts on the Small Parts and Bearings website.


DA4000M Daiwa Parts
DA4000M Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of DA4000M Daiwa Parts on the Small Parts and Bearings website.


GS3 Daiwa Parts
GS3 Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of GS3 Daiwa Parts on the Small Parts and Bearings website.


Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose
Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Also see combined categories:
All Threaded Spring Plungers

Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.

Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.

There is also a good range of Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose on the Small Parts and Bearings website.


3500 - 4000 Daiwa Parts
3500 - 4000 Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of 3500 - 4000 Daiwa Parts on the Small Parts and Bearings website.


Jupiter Series Daiwa Parts
Jupiter Series Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Jupiter Series Daiwa Parts on the Small Parts and Bearings website.


Theory 4000 Daiwa Parts
Theory 4000 Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Theory 4000 Daiwa Parts on the Small Parts and Bearings website.


Procyon 100 HSD Daiwa Parts
Procyon 100 HSD Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Procyon 100 HSD Daiwa Parts on the Small Parts and Bearings website.


Mounts - Cylindrical - Special Purpose
Mounts - Cylindrical - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).

There is also a good range of Mounts - Cylindrical - Special Purpose on the Small Parts and Bearings website.


Bearings - Chamfered Edges
Bearings - Chamfered Edges


Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.

Related Information:

There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.


Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD


Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:

There is also a good range of Bearings - Gothic Groove Profile OD on the Small Parts and Bearings website.


Bearings - Polypropylene - Special Types
Bearings - Polypropylene - Special Types


Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

There is also a good range of Bearings - Polypropylene - Special Types on the Small Parts and Bearings website.


Bearings - Ball - 4 Point Contact
Bearings - Ball - 4 Point Contact


4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Related Information:

There is also a good range of Bearings - Ball - 4 Point Contact on the Small Parts and Bearings website.


Bearings - Ball - Textile Industry
Bearings - Ball - Textile Industry


Special Design Stainless and Chrome Steel Bearings for the Textile Industry.

Bearings in this category often have special features. Designed for use in textile industry machinery.

Related Information:

There is also a good range of Bearings - Ball - Textile Industry on the Small Parts and Bearings website.


Bearings - Acetal - Special Types
Bearings - Acetal - Special Types


Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

There is also a good range of Bearings - Acetal - Special Types on the Small Parts and Bearings website.


Tools - Pin Wrench
Tools - Pin Wrench

Also see combined categories:
All Tools

Used on nuts with two holes in the face.

Constructed of special blued steel.

There is also a good range of Tools - Pin Wrench on the Small Parts and Bearings website.


Screws - Security - Socket - Countersunk - Stainless
Screws - Security - Socket - Countersunk - Stainless

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

There is also a good range of Screws - Security - Socket - Countersunk - Stainless on the Small Parts and Bearings website.


Screws - Security - Socket - Countersunk - Zinc Plated
Screws - Security - Socket - Countersunk - Zinc Plated

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

There is also a good range of Screws - Security - Socket - Countersunk - Zinc Plated on the Small Parts and Bearings website.


Screws - Security - Button - Socket
Screws - Security - Button - Socket

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

There is also a good range of Screws - Security - Button - Socket on the Small Parts and Bearings website.


Screws - Security - Cap - Socket
Screws - Security - Cap - Socket

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

There is also a good range of Screws - Security - Cap - Socket on the Small Parts and Bearings website.


Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose


Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


There is also a good range of Bearings - Acetal - Special Purpose on the Small Parts and Bearings website.


Bearings - Spherical OD
Bearings - Spherical OD


Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Related Information:

There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.


Bearings - Ball - 304 Stainless Steel
Bearings - Ball - 304 Stainless Steel

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm, Width +0/- 0.12 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:

There is also a good range of Bearings - Ball - 304 Stainless Steel on the Small Parts and Bearings website.


Bearings - Acetal - MRI Table
Bearings - Acetal - MRI Table


Special acetal bearings for MRI table wheels


There is also a good range of Bearings - Acetal - MRI Table on the Small Parts and Bearings website.


Bearings - U Groove Profile OD
Bearings - U Groove Profile OD

Also see combined categories:
All U Groove Bearings and Pulleys

Special OD Bearings.

Contact us for tolerances.

Related Information:

There is also a good range of Bearings - U Groove Profile OD on the Small Parts and Bearings website.


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications


Special acetal bearings for disk cleaning


There is also a good range of Bearings - Acetal - Disk Cleaning Applications on the Small Parts and Bearings website.


Bearings - Square Groove Profile OD
Bearings - Square Groove Profile OD


Special bearings. Not readily available.


There is also a good range of Bearings - Square Groove Profile OD on the Small Parts and Bearings website.


Bearings - Vee Groove Profile OD
Bearings - Vee Groove Profile OD


Special OD Bearings.


Related Information:

There is also a good range of Bearings - Vee Groove Profile OD on the Small Parts and Bearings website.


O-Rings - Dental
O-Rings - Dental


Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:

There is also a good range of O-Rings - Dental on the Small Parts and Bearings website.


Check Size Before Ordering Specialized Roubaix Parts
Check Size Before Ordering Specialized Roubaix Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering Specialized Roubaix Parts on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Helicoil
Tools - Taps - High Speed Steel - Helicoil

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


There is also a good range of Tools - Taps - High Speed Steel - Helicoil on the Small Parts and Bearings website.


Screws - Pan Head - PEEK - Philips
Screws - Pan Head - PEEK - Philips

Also see combined categories:
All Machine Screws
All Plastic Screws

Machine screws. PEEK is a super-engineering thermoplastic with special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of VitreTM.

Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance. Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180o Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0. Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm. For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.

Related Information:

There is also a good range of Screws - Pan Head - PEEK - Philips on the Small Parts and Bearings website.


Shafting - Carbon Steel - Keyed
Shafting - Carbon Steel - Keyed

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.

There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.


Screws - Security - Post Combi Square - Pan Head - Super Zinc
Screws - Security - Post Combi Square - Pan Head - Super Zinc

Also see combined categories:
All Security Screws

Each 200 pack comes with a Post Combination Driver Bit. Metric only.

Use special tool listed under Screws - Securty - Socket - Tools.

Related Information:

There is also a good range of Screws - Security - Post Combi Square - Pan Head - Super Zinc on the Small Parts and Bearings website.


153 I Daiwa Parts
153 I Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of 153 I Daiwa Parts on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.


Inserts - Thread Repair - EZ-Lok - Selection Kits
Inserts - Thread Repair - EZ-Lok - Selection Kits

Also see combined categories:
All EZ Lok inserts and Kits

Contains a selection of E-Z Lok inserts

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

There is also a good range of Inserts - Thread Repair - EZ-Lok - Selection Kits on the Small Parts and Bearings website.


Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel
Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel on the Small Parts and Bearings website.


Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel
Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel on the Small Parts and Bearings website.


Gear Racks - Flexible - Guide Rails
Gear Racks - Flexible - Guide Rails

Also see combined categories:
All Flexible Gear Racks

For mounting flexirack. Flexible nylon or rigid aluminium guide rails.

Longer lengths in Nylon available on special order. For easy ready selected sets of rack and gear please see the HES website.

There is also a good range of Gear Racks - Flexible - Guide Rails on the Small Parts and Bearings website.


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.

There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.


Bumpers - Cylindrical - Rubber
Bumpers - Cylindrical - Rubber

Also see combined categories:
All Cylindrical Bumpers

Built in steel screw for easy instrallation. Made with abrasion resistant SBR rubber. Resistant to abrasion and oxidation. Excellent cushioning and vibration control.

Non staining, non marring polyurethane. Sold by the pad - number of bumpers per pad shown in the listings. Peel off and apply. Clear. 60-70 Shore A hardness.

There is also a good range of Bumpers - Cylindrical - Rubber on the Small Parts and Bearings website.


Bumpers - Domed - Rubber
Bumpers - Domed - Rubber


Built in steel screw for easy instrallation. Made with abrasion resistant SBR rubber. Resistant to abrasion and oxidation. Excellent cushioning and vibration control.

Non staining, non marring polyurethane. Sold by the pad - number of bumpers per pad shown in the listings. Peel off and apply. Clear. 60-70 Shore A hardness.

There is also a good range of Bumpers - Domed - Rubber on the Small Parts and Bearings website.


Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Sprockets.

Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:

There is also a good range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core on the Small Parts and Bearings website.


Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Pulleys.

Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:

There is also a good range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core on the Small Parts and Bearings website.


Regal Series S - X - Z Daiwa Parts
Regal Series S - X - Z Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Regal Series S - X - Z Daiwa Parts on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2651 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2651 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.