Chain And Sprockets Roller Categories
Sprockets - Idler
Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Related Information:
There is also a good range of Sprockets - Idler on the Small Parts and Bearings website.
Chain - Roller - Metal - Miniature
Single Row. Short Lengths.
Connecting link included. 6.35mm Pitch (1/4 inch). Single Row.
Related Information:
Chain - Roller - Plastic - Simplex
Includes acetal, polyproylene and nylon. Miniature size from 3.1mm up to 12.7mm. Single row.
Snap together construction - no joining links required.
Related Information:
There is also a good range of Chain - Roller - Plastic - Simplex on the Small Parts and Bearings website.
Chain - Roller - Metal - Duplex - Links
High tensile steel. Double row.
There is also a good range of Chain - Roller - Metal - Duplex - Links on the Small Parts and Bearings website.
Chain - Roller - Metal - Simplex - Links
Includes Miniature Sizes. Single row.
There is also a good range of Chain - Roller - Metal - Simplex - Links on the Small Parts and Bearings website.
Sprockets - Miniature - Single Row - Steel
25-1 ASA 1/4 Inch. With unfinished bore. Economy for hobbies.
Match with miniature 6.35mm simplex chain. American Standard ASA25-1 - 1/4 inch.
Related Information:
Sprockets - 3.12 x 1.47mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 3.12mm miniature plastic chain.
Related Information:
There is also a good range of Sprockets - 3.12 x 1.47mm - Simplex - Plastic on the Small Parts and Bearings website.
Sprockets - 3.75 x 1.6mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 3.75mm miniature plastic or stainless chain.
Related Information:
There is also a good range of Sprockets - 3.75 x 1.6mm - Simplex - Plastic on the Small Parts and Bearings website.
Sprockets - 6.35 x 2.8mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 6.35mm plastic or steel chain (25-1 ASA). American Standard 25-1 - 1/4 inch.
Related Information:
There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Plastic on the Small Parts and Bearings website.
Sprockets - 9.53 x 4.7mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 9.53x4.7mm plastic or steel chain (35-1 ASA). American Standard 35-1 - 3/8 inch.
Related Information:
There is also a good range of Sprockets - 9.53 x 4.7mm - Simplex - Plastic on the Small Parts and Bearings website.
Sprockets - 9.53 x 5.7mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 9.53x5.7mm steel chain (06B BS). British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 9.53 x 5.7mm - Simplex - Plastic on the Small Parts and Bearings website.
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock
Match with 12.70x7.75mm simplex chain (08B BS)
Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock on the Small Parts and Bearings website.
Sprockets - 12.7 x 6.38mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x6.38mm simplex chain (41-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 41-1 - 1/2 inch.
Related Information:
There is also a good range of Sprockets - 12.7 x 6.38mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore
Match with 12.70x7.75mm duplex chain (08B-2 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch.
Related Information:
There is also a good range of Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.75mm simplex chain (08B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 40-1 - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 15.88 x 9.4mm - Simplex - Carbon Steel - Plain Bore
Match with 15.90x9.4mm steel chain (50-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 50-1 - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 15.88 x 9.4mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Match with 15.90x9.65mm duplex steel chain (10B-2 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Match with 19.05x11.68mm simplex steel chain (12B-1 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore
Miniature 3.75mm Pitch.
Match with 3.75mm simplex chain. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore
25-1 ASA 1/4 Inch. With finished bore.
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore on the Small Parts and Bearings website.
Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
25-1 ASA 1/4 Inch. With unfinished bore.
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore
25-1 ASA 1/4 Inch. Stainless Steel 303 grade with unfinished bore.
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 9.53 x 4.7mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x4.7mm steel chain (35-1 ASA)
Finish bored and keyed sprockets with black oxide finish. Hub diameters vary to suit bore. American Standard 35-1 - 3/8 inch.
Related Information:
There is also a good range of Sprockets - 9.53 x 4.7mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x5.7mm steel chain (06B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.75mm simplex chain (08B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Match with 15.90x9.65mm duplex steel chain (10B-2 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Match with 19.05x11.68mm simplex steel chain (12B-1 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
25-1 ASA 1/4 Inch
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprocket Plates - 9.53 x 4.8mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x4.8mm steel chain (35ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprocket Plates - 9.53 x 4.8mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x5.7mm steel chain (06B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
There is also a good range of Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.
You may also be interested in
Chain and Sprockets Ladder
Sprockets - Ladder Chain - 4.242mm Pitch - Size 21
Plastic.
Related Information:
There is also a good range of Sprockets - Ladder Chain - 4.242mm Pitch - Size 21 on the Small Parts and Bearings website.
Sprockets - Ladder Chain - 7.264mm Pitch - Size 18
Plastic, bronze and steel.
Related Information:
There is also a good range of Sprockets - Ladder Chain - 7.264mm Pitch - Size 18 on the Small Parts and Bearings website.
Tools - Chain Breaker
Used to break roller chain at the pins
There is also a good range of Tools - Chain Breaker on the Small Parts and Bearings website.
General Derailer Sprocket Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of General Derailer Sprocket Parts on the Small Parts and Bearings website.
Bushings - QD
Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing
Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley.
Related Information:
There is also a good range of Bushings - QD on the Small Parts and Bearings website.
Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core
Same as US 20 Pitch - Use with Posi-Drive Sprockets.
Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.
Related Information:
There is also a good range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core on the Small Parts and Bearings website.
Rollers - Bearing - Nylon Covered
Nylon tyred rollers for heavy duty applications
Nylon tyre (tire) covering a precision deep groove radial ball bearings.
Related Information:
There is also a good range of Rollers - Bearing - Nylon Covered on the Small Parts and Bearings website.
Rollers - Drive
Neoprene 60 durometer black ground outside diameter drive rollers
There is also a good range of Rollers - Drive on the Small Parts and Bearings website.
Rollers - Durasoft - Finned - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Finned - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Shaft Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Shaft Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Durasoft - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.
There is also a good range of Rollers - Durasoft - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.
There is also a good range of Rollers - Durasoft - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Feed - With Aluminium Sleeve
Tolerance of Roller Outside Diameter (D) is +/-0.075 mm
Urethane 60 Durometer ground outside diameter. Aluminium sleeve. Feed rollers do not have a rotating bore. They are designed to turn with the shaft.
Related Information:
There is also a good range of Rollers - Feed - With Aluminium Sleeve on the Small Parts and Bearings website.
Rollers - Flanged
There is also a good range of Rollers - Flanged on the Small Parts and Bearings website.
Rollers - Idler - With Plain Sintered Bearing
Related Information:
There is also a good range of Rollers - Idler - With Plain Sintered Bearing on the Small Parts and Bearings website.
Rollers - Nylon Tyre - Convex - Through Bore
Nylon tyred rollers for cabinet doors, gym equipment etc. Commonly found in rowing machines.
Related Information:
There is also a good range of Rollers - Nylon Tyre - Convex - Through Bore on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125387 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
