Miniature Bearings Australia Pty Ltd

Chain And Sprockets Ladder Categories


Sprockets - Ladder Chain - 7.264mm Pitch Size 18
Sprockets - Ladder Chain - 7.264mm Pitch Size 18

Also see combined categories:
All Sprockets for Ladder Chain

Plastic, bronze and steel.

This category may be available in the new MBA online store at Sprockets - Ladder Chain - 7.264mm Pitch Size 18.

Related Information:

There is also a good range of Sprockets - Ladder Chain - 7.264mm Pitch Size 18 on the Small Parts and Bearings website.


You may also be interested in

Chain and Sprockets Roller


Sprockets - Idler
Sprockets - Idler


Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners. This category may be available in the new MBA online store at Sprockets - Idler.

Related Information:

There is also a good range of Sprockets - Idler on the Small Parts and Bearings website.


Sprockets - 3.12 x 1.47mm - Simplex - Plastic
Sprockets - 3.12 x 1.47mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 3.12mm miniature plastic chain. This category may be available in the new MBA online store at Sprockets - 3.12 x 1.47mm - Simplex - Plastic.

Related Information:

There is also a good range of Sprockets - 3.12 x 1.47mm - Simplex - Plastic on the Small Parts and Bearings website.


Sprockets - 3.75 x 1.6mm - Simplex - Plastic
Sprockets - 3.75 x 1.6mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 3.75mm miniature plastic or stainless chain. This category may be available in the new MBA online store at Sprockets - 3.75 x 1.6mm - Simplex - Plastic.

Related Information:

There is also a good range of Sprockets - 3.75 x 1.6mm - Simplex - Plastic on the Small Parts and Bearings website.


Sprockets - 6.35 x 2.8mm - Simplex - Plastic
Sprockets - 6.35 x 2.8mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 6.35mm plastic or steel chain (25-1 ASA). American Standard 25-1 - 1/4 inch. This category may be available in the new MBA online store at Sprockets - 6.35 x 2.8mm - Simplex - Plastic.

Related Information:

There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Plastic on the Small Parts and Bearings website.


Sprockets - 9.53 x 4.7mm - Simplex - Plastic
Sprockets - 9.53 x 4.7mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 9.53x4.7mm plastic or steel chain (35-1 ASA). American Standard 35-1 - 3/8 inch. This category may be available in the new MBA online store at Sprockets - 9.53 x 4.7mm - Simplex - Plastic.

Related Information:

There is also a good range of Sprockets - 9.53 x 4.7mm - Simplex - Plastic on the Small Parts and Bearings website.


Sprockets - 9.53 x 5.7mm - Simplex - Plastic
Sprockets - 9.53 x 5.7mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 9.53x5.7mm steel chain (06B BS). British Standard 06B - 3/8 inch. This category may be available in the new MBA online store at Sprockets - 9.53 x 5.7mm - Simplex - Plastic.

Related Information:

There is also a good range of Sprockets - 9.53 x 5.7mm - Simplex - Plastic on the Small Parts and Bearings website.


Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock.

Related Information:

There is also a good range of Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock on the Small Parts and Bearings website.


Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm duplex chain (08B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.85mm simplex chain (40-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 40-1 - 1/2 inch. With and without hubs. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. This category may be available in the new MBA online store at Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore
Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Miniature 3.75mm Pitch.

Match with 3.75mm simplex chain. This category may be available in the new MBA online store at Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore
Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch. With finished bore.

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. This category may be available in the new MBA online store at Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore.

Related Information:

There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore on the Small Parts and Bearings website.


Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch. With unfinished bore.

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. This category may be available in the new MBA online store at Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore
Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch. Stainless Steel 303 grade with unfinished bore.

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. This category may be available in the new MBA online store at Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 9.53 x 4.7mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 9.53 x 4.7mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x4.7mm steel chain (35-1 ASA)

Finish bored and keyed sprockets with black oxide finish. Hub diameters vary to suit bore. American Standard 35-1 - 3/8 inch. This category may be available in the new MBA online store at Sprockets - 9.53 x 4.7mm - Simplex - Carbon Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 9.53 x 4.7mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. This category may be available in the new MBA online store at Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore.

Related Information:

There is also a good range of Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.

Related Information:

There is also a good range of Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.85mm simplex chain (40-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.

Related Information:

There is also a good range of Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.

Related Information:

There is also a good range of Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

25-1 ASA 1/4 Inch

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch.

Related Information:

There is also a good range of Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch.

Related Information:

There is also a good range of Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


General Derailer Sprocket Parts
General Derailer Sprocket Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of General Derailer Sprocket Parts on the Small Parts and Bearings website.


Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

There is also a good range of Assemblies - Locking - Flanged on the Small Parts and Bearings website.


Bushings - QD
Bushings - QD


Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing

Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley. This category may be available in the new MBA online store at Bushings - QD.

Related Information:

There is also a good range of Bushings - QD on the Small Parts and Bearings website.


Bearings - Special Purpose - Acetal
Bearings - Special Purpose - Acetal


Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems

This category may be available in the new MBA online store at Bearings - Special Purpose - Acetal.

Related Information:

There is also a good range of Bearings - Special Purpose - Acetal on the Small Parts and Bearings website.


Snaps - Spring - Interlocking - Style 1
Snaps - Spring - Interlocking - Style 1

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 1.

There is also a good range of Snaps - Spring - Interlocking - Style 1 on the Small Parts and Bearings website.


Snaps - Spring - Interlocking - Style 2
Snaps - Spring - Interlocking - Style 2

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 2.

There is also a good range of Snaps - Spring - Interlocking - Style 2 on the Small Parts and Bearings website.


Snaps - Spring - Interlocking - Style 3
Snaps - Spring - Interlocking - Style 3

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.

This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 3.

There is also a good range of Snaps - Spring - Interlocking - Style 3 on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227579 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227579 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.