CAMS CATEGORIES
Cams - Adjustable
Related Information:
There is also a good range of Cams - Adjustable on the Small Parts and Bearings website.
Cam Followers
Cam Followers - Flanged Stud Type
There is also a good range of Cam Followers - Flanged Stud Type on the Small Parts and Bearings website.
Cam Followers - Miniature - Standard
Stainless steel ball type cam followers.
There is also a good range of Cam Followers - Miniature - Standard on the Small Parts and Bearings website.
Cam Followers - Needle Roller Type - Crowned
There is also a good range of Cam Followers - Needle Roller Type - Crowned on the Small Parts and Bearings website.
Cam Followers - Needle Roller Type - Standard
There is also a good range of Cam Followers - Needle Roller Type - Standard on the Small Parts and Bearings website.
Cam Followers - Plain Stud Type
There is also a good range of Cam Followers - Plain Stud Type on the Small Parts and Bearings website.
Cam Followers - Roller Type - Miniature - Standard
Small carbon steel roller type cam followers.
Carbon Steel - Nitrile Rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.
Related Information:
There is also a good range of Cam Followers - Roller Type - Miniature - Standard on the Small Parts and Bearings website.
Cam Followers - Roller Type - Stainless Steel
Stainless steel roller type cam followers.
Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.
Related Information:
There is also a good range of Cam Followers - Roller Type - Stainless Steel on the Small Parts and Bearings website.
Cam Followers - Roller Type - Standard
Carbon steel roller type cam followers.
Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing.
Related Information:
There is also a good range of Cam Followers - Roller Type - Standard on the Small Parts and Bearings website.
Cam Followers - Roller Type - Urethane Covered
Urethane tyred cam followers for noise reduction, reduced wear and non marking
There is also a good range of Cam Followers - Roller Type - Urethane Covered on the Small Parts and Bearings website.
Cam Followers - Self Lubricating - Bronze Bushing
There is also a good range of Cam Followers - Self Lubricating - Bronze Bushing on the Small Parts and Bearings website.
Cam Followers - V-Groove Stud Type
There is also a good range of Cam Followers - V-Groove Stud Type on the Small Parts and Bearings website.
Rollers - Yoke - Cam
Urethane tyred cam yoke rollers for noise reduction, reduced wear and non marking
Polycoated shore 80A cast urethane cover.
Related Information:
There is also a good range of Rollers - Yoke - Cam on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action Mounting Blocks
Used with cam action indexing plungers
Mounting blocks are made from steel with black oxide finish.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action Mounting Blocks on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - With Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - With Hex Nut on the Small Parts and Bearings website.
Plungers - Indexing - Cam Action - Without Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
There is also a good range of Plungers - Indexing - Cam Action - Without Hex Nut on the Small Parts and Bearings website.
Latches - 1-4 Turn - Simple
With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.
The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.
There is also a good range of Latches - 1-4 Turn - Simple on the Small Parts and Bearings website.
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.
Related Information:
There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.
Washers - LockRite - 316 Stainless Steel
Supplied in pairs.
Locking function not affected by lubrication. Assembled in pairs, cam face to cam face. Eliminates the need for adhesives. Reusable. Can be used with fasteners up to grade 12.9.
There is also a good range of Washers - LockRite - 316 Stainless Steel on the Small Parts and Bearings website.
Latches - 1-4 Turn -Tee Handle - Non Locking
Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.
Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.
There is also a good range of Latches - 1-4 Turn -Tee Handle - Non Locking on the Small Parts and Bearings website.
Washers - LockRite - Corrosion Resistant
Supplied in pairs. With Delta Protekt coating.
Locking function not affected by lubrication. Assembled in pairs, cam face to cam face. Eliminates the need for adhesives. Reusable. Can be used with fasteners up to grade 12.9.
There is also a good range of Washers - LockRite - Corrosion Resistant on the Small Parts and Bearings website.
Handles - Latching - 2-Point Locking Rod Kit
Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.
There is also a good range of Handles - Latching - 2-Point Locking Rod Kit on the Small Parts and Bearings website.
Bearings - Hydrodynamic Pressure
Alternative to ball bearings - quiet operation - patented design.
Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.
Related Information:
There is also a good range of Bearings - Hydrodynamic Pressure on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
