Cable Ties Categories
Ties - Cable - Standard
Cable ties small to large. Light to heavy duty.
There is also a good range of Ties - Cable - Standard on the Small Parts and Bearings website.
Ties - Cable - With Mounting Holes
Cable ties with screw mounting holes.
There is also a good range of Ties - Cable - With Mounting Holes on the Small Parts and Bearings website.
Attachments - Wire Rope Clips - Carbon Steel
Hot galvanised carbon steel
Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.
There is also a good range of Attachments - Wire Rope Clips - Carbon Steel on the Small Parts and Bearings website.
Attachments - Wire Rope Clips - Stainless Steel
304 Stainless Steel
Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.
There is also a good range of Attachments - Wire Rope Clips - Stainless Steel on the Small Parts and Bearings website.
Attachments - Eyes - Synchromesh
Use with synchromesh or standard miniature cable
Recommended dimensions after crimping:. 1.05 Cable - A=2.59. 2.06 Cable - A=2.64. 2.60 Cable - A=2.72. 3.40 Cable - A=2.80 (3.40 Cable must have outer helical wire removed prior to crimping).
Related Information:
There is also a good range of Attachments - Eyes - Synchromesh on the Small Parts and Bearings website.
Cable - Miniature - Coated
Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)
Recommended that nylon coating is stripped prior to swaging. Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum. Also called bowden cable.
Related Information:
There is also a good range of Cable - Miniature - Coated on the Small Parts and Bearings website.
Cable - Miniature - Uncoated
Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)
Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum. Also called bowden cable.
Related Information:
There is also a good range of Cable - Miniature - Uncoated on the Small Parts and Bearings website.
Attachments - Loop Sleeves
Use with synchromesh or standard miniature cable
Related Information:
There is also a good range of Attachments - Loop Sleeves on the Small Parts and Bearings website.
Attachments - Stop Sleeves
Use with synchromesh or standard miniature cable
Related Information:
There is also a good range of Attachments - Stop Sleeves on the Small Parts and Bearings website.
Attachments - Threaded Plugs
Use with synchromesh or standard miniature cable
F and L dimensions are obtained after swaging. Before swaging the fitting is round.
Related Information:
There is also a good range of Attachments - Threaded Plugs on the Small Parts and Bearings website.
Attachments - Thimbles - Carbon Steel
Hot galvanised carbon steel. Use with synchromesh or standard miniature cable
Meets USA Fed. Spec. FF-T-276b for Type III thimbles.
Related Information:
There is also a good range of Attachments - Thimbles - Carbon Steel on the Small Parts and Bearings website.
Attachments - Thimbles - Stainless Steel
316 Stainless Steel. Use with synchromesh cable or standard miniature cable. Use with synchromesh or standard miniature cable
Thimbles provide loop support at higher loads and protect cables from wear when motion is present. Some thimbles may have open or uneven ends.
Related Information:
There is also a good range of Attachments - Thimbles - Stainless Steel on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 1
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 1 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 2
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 2 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 3
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 3 on the Small Parts and Bearings website.
Reels - Spring Powered - Base Mounted - Plastic Case
Used in counterbalances, door closers, cable retractors, hose retreivers, tool head returns, cabinets and furniture.
Related Information:
There is also a good range of Reels - Spring Powered - Base Mounted - Plastic Case on the Small Parts and Bearings website.
Shafts - Flexible - Coupling Ends - Open - Mild Steel
Flexible shafting with coupling ends ready to attach to a fixed shaft.
1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.
Related Information:
There is also a good range of Shafts - Flexible - Coupling Ends - Open - Mild Steel on the Small Parts and Bearings website.
Dubro Accessories Listed by Description
Accessories for model airplanes and other hobbies.
Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.
There is also a good range of Dubro Accessories Listed by Description on the Small Parts and Bearings website.
Bushings - Snap - Closed
Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Open snap bushings are designed to provide protection from sharp edges where cable or hose runs through plate steel.
Similar to a bung, but designed with expanding catch for use in holes in sheet products. Also see grommets for a similar product made from rubber.
Related Information:
There is also a good range of Bushings - Snap - Closed on the Small Parts and Bearings website.
Bushings - Snap - Open
Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.
Also called a dome plug. Also see grommets for a similar product made from rubber.
Related Information:
There is also a good range of Bushings - Snap - Open on the Small Parts and Bearings website.
Plungers - Ball - Threaded - With Limit Switch
Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.
Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.
There is also a good range of Plungers - Ball - Threaded - With Limit Switch on the Small Parts and Bearings website.
Tie Downs - D-Ring - Forged with Bolt-on Bracket
C-1045 steel with bolt-on mounting bracket
There is also a good range of Tie Downs - D-Ring - Forged with Bolt-on Bracket on the Small Parts and Bearings website.
Bearings - Precision Scale
Bearings for scales.
Note! Minimum quantities apply to production of these items.
There is also a good range of Bearings - Precision Scale on the Small Parts and Bearings website.
RC Spare Parts - Venom
Venom Hobby Parts listed by description. Parts for 1/10 crawler, Baja, 1/8 scale cars, Beacon, Corsair, CPR Creeper, D Micro, DXL, EKOS, EPO, GPV-1, MINIZ, Island Hopper, King, Segad, KOS, KWA, M05, ME-109, MTT, Night Ranger 3D, Outlaw RC, Ozone Heli
Parts also to suit P-51, Texan, Savage, Scorpion AX10, Skywolf 3CH, Strait Jacket, TraXXas, TRX Slash. Ailerons fittings, Anti-rotation arm, A arms, Axle, Bag, Ball end, batteries assembleys, battery(bags, bars, box, case, charger, holder), beadlock, bearing kits, retainers and set. bell crank, blade grips and sets, body posts, bolt, bracket, bulkhead, cables, camber gauge, canopy, caps, carburettor, charger, chassis covers and plates. Cockpit cover, Collars, connectors, control links, control links, tray and units, coupler, cowl, crankcase, crankshaft, cylinder, Damper, decal set, differential (case, housing and system). Dig unit, drive (belt and dog), driveline, electronics unit, elevator, e-ring, ESC, exhaust (coupler, deflector and pipe), fail safes, feathering spindle.
There is also a good range of RC Spare Parts - Venom on the Small Parts and Bearings website.
Bungs - Rectangular
Plastic bungs fit inside rectangular tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Rectangular on the Small Parts and Bearings website.
Bungs - Round
Plastic bungs fit inside round tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Round on the Small Parts and Bearings website.
Bungs - Square
Plastic bungs fit inside square tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Square on the Small Parts and Bearings website.
Wire - Silicone
Silicone Wire in various colours and gauges
There is also a good range of Wire - Silicone on the Small Parts and Bearings website.
Wire - 302 Stainless
302 Stainless Steel
Related Information:
There is also a good range of Wire - 302 Stainless on the Small Parts and Bearings website.
Wire - 316 Stainless
316 Stainless Steel
Related Information:
There is also a good range of Wire - 316 Stainless on the Small Parts and Bearings website.
Wire - Steel - Spring - Music - Coils
SAE 1090 Spring Steel.
Related Information:
There is also a good range of Wire - Steel - Spring - Music - Coils on the Small Parts and Bearings website.
Wire - Steel - Spring - Music Wire - Short Lengths
SAE 1090 Spring Steel. Includes inch and metric sizes.
Shipped in straight lengths on wooden backing board. Metric and imperial.
Related Information:
There is also a good range of Wire - Steel - Spring - Music Wire - Short Lengths on the Small Parts and Bearings website.
Snaps - Steel Wire - Bit
Zinc Plated
There is also a good range of Snaps - Steel Wire - Bit on the Small Parts and Bearings website.
Snaps - Steel Wire - Bodies
Nickel Plated
There is also a good range of Snaps - Steel Wire - Bodies on the Small Parts and Bearings website.
Snaps - Steel Wire - Open Swivel
Zinc Plated
There is also a good range of Snaps - Steel Wire - Open Swivel on the Small Parts and Bearings website.
Snaps - Steel Wire - Swivel Eye
Nickel Plated
There is also a good range of Snaps - Steel Wire - Swivel Eye on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Double Wire - Square - 304 Stainless Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Double Wire - Square - 304 Stainless Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel on the Small Parts and Bearings website.
Gears - Pinion Wire - 32 Diametrical Pitch
Brass and carbon steel.
Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths.
There is also a good range of Gears - Pinion Wire - 32 Diametrical Pitch on the Small Parts and Bearings website.
Springs - Extension - Music Wire
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.
Related Information:
There is also a good range of Springs - Extension - Music Wire on the Small Parts and Bearings website.
Tools - Wire Working
For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.
Related Information:
There is also a good range of Tools - Wire Working on the Small Parts and Bearings website.
Springs - Compression - Long Lengths - Music Wire
1 metre and 914mm lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.
Related Information:
There is also a good range of Springs - Compression - Long Lengths - Music Wire on the Small Parts and Bearings website.
Rings - Split - Stainless Steel
316 stainless steel wire rings.
There is also a good range of Rings - Split - Stainless Steel on the Small Parts and Bearings website.
Rings - Split - Zinc Plated Steel
Zinc plated hard drawn steel wire rings.
There is also a good range of Rings - Split - Zinc Plated Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125214 products in 2327 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
