BUMPERS CATEGORIES

There is also a good range of Mounts - Buffer - Female on the Small Parts and Bearings website.

Mounts - Buffer - Male

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Buffer - Male on the Small Parts and Bearings website.

Mounts - Buffer - Male - Conical

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:

There is also a good range of Mounts - Buffer - Male - Conical on the Small Parts and Bearings website.

Mounts - Buffer - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).

Related Information:

There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.

Mounts - Universal - For Acme Thread and Ballscrews

Use grade 8 hex socket head cap screws for mounting.

Related Information:

There is also a good range of Mounts - Universal - For Acme Thread and Ballscrews on the Small Parts and Bearings website.

Dampers - Double Studded - Silicone

Damps low frequency vibrations. Vibration dampening

Use for compression only.

There is also a good range of Dampers - Double Studded - Silicone on the Small Parts and Bearings website.

Dampers - Rotary - 2.0 to 3.0 Ncm

Also see combined categories:
All Dampers

Rotary dampers enable products to function with a smooth mechanical motion. Prevent lid and access panel closure damage.

Body: Polycarbonate / Gear: Polyacetal. Fluid: Silicone. Temp range 0 to 50 ^oC.

There is also a good range of Dampers - Rotary - 2.0 to 3.0 Ncm on the Small Parts and Bearings website.

Dampers - Rotary - 5.0 to 15.0 Ncm

Also see combined categories:
All Dampers

Rotary dampers enable products to function with a smooth mechanical motion. Prevent lid and access panel closure damage.

Body: Polycarbonate / Gear: Polyacetal. Fluid: Silicone. Temp range 0 to 50 ^oC.

There is also a good range of Dampers - Rotary - 5.0 to 15.0 Ncm on the Small Parts and Bearings website.

Dampers - Rotary - 50 to 400 Ncm

Also see combined categories:
All Dampers

Rotary dampers enable products to function with a smooth mechanical motion. Prevent lid and access panel closure damage.

Body: Polycarbonate. Temp range 0 to 50 ^oC. Weight: Max 120 grams.

There is also a good range of Dampers - Rotary - 50 to 400 Ncm on the Small Parts and Bearings website.

Mounts - Vibro-Insulator Strips

Vibration dampening

Related Information:

There is also a good range of Mounts - Vibro-Insulator Strips on the Small Parts and Bearings website.

Mounts - Vibration Isolating - Tee Bushes

Vibration isolation for mobile and static applications involving plate clamping

Reduces structure borne noise and absorbs shock forces. Low profile height.

Related Information:

There is also a good range of Mounts - Vibration Isolating - Tee Bushes on the Small Parts and Bearings website.

Mounts - Vibration - Isolation - Compression - Stainless Steel

Compression shear mounts for harsh environments.

Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.

Related Information:

There is also a good range of Mounts - Vibration - Isolation - Compression - Stainless Steel on the Small Parts and Bearings website.

Mounts - Vibration - Isolation - Cup Style 2

Also see combined categories:
All Cup Mounts

Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.

High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.

Related Information:

There is also a good range of Mounts - Vibration - Isolation - Cup Style 2 on the Small Parts and Bearings website.

Mounts - Vibration - Isolation Pads - Compression Shear

Also see combined categories:
All Isolation Pad Mounts

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.

Related Information:

There is also a good range of Mounts - Vibration - Isolation Pads - Compression Shear on the Small Parts and Bearings website.

Mounts - Vibration - Isolation Pads - General Purpose

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.

Related Information:

There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.

Mounts - Base - Neoprene - Style 2

Also see combined categories:
All Neoprene Base Mounts

Related Information:

There is also a good range of Mounts - Base - Neoprene - Style 2 on the Small Parts and Bearings website.

Mounts - Bonded

Also see combined categories:
All Bonded Mounts

Related Information:

There is also a good range of Mounts - Bonded on the Small Parts and Bearings website.

Mounts - Bonded - Two Piece

Also see combined categories:
All Bonded Mounts

Steel insert overcoated with rubber joins the two pieces.

Related Information:

There is also a good range of Mounts - Bonded - Two Piece on the Small Parts and Bearings website.

Mounts - Centre Bolt - Solo Unitised

Also see combined categories:
All Centrebolt Mounts

Vibration dampening. Also known as T Bushes or Bonded Mounts.

Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.

Related Information:

There is also a good range of Mounts - Centre Bolt - Solo Unitised on the Small Parts and Bearings website.

Mounts - Cone - Delrin

Related Information:

There is also a good range of Mounts - Cone - Delrin on the Small Parts and Bearings website.

Mounts - Cupmounts - Industrial

Also see combined categories:
All Cup Mounts

Protect against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.

Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.

Related Information:

There is also a good range of Mounts - Cupmounts - Industrial on the Small Parts and Bearings website.

Mounts - Bobbin - Female

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Bobbin - Female on the Small Parts and Bearings website.

Mounts - Bobbin - Male

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Bobbin - Male on the Small Parts and Bearings website.

Mounts - Bobbin - Male - Square Base

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.

Related Information:

There is also a good range of Mounts - Bobbin - Male - Square Base on the Small Parts and Bearings website.

Mounts - Bobbin - Male to Female

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Related Information:

There is also a good range of Mounts - Bobbin - Male to Female on the Small Parts and Bearings website.

Mounts - Anti-Vibration - 303 Stainless Steel

Corrosion resistant designed with high grade nitrile rubber and stainless steel.

Swivel movement plus or minus 7^o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Related Information:

There is also a good range of Mounts - Anti-Vibration - 303 Stainless Steel on the Small Parts and Bearings website.

Mounts - Anti-Vibration - Zinc Plated Steel

Designed with high grade nitrile rubber and zinc plated steel.

Swivel movement plus or minus 7^o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Related Information: