Belts Timing Xl Pitch 5.08mm Categories
Belts - Timing - 5.080mm Pitch - XL - 6.4mm Wide
Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 6.4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide
Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide
Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.080mm Pitch - XL Double Sided - 12.7mm Wide
Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 12.7mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.080mm Pitch - XL Double Sided - 6.4mm Wide
Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 6.4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.080mm Pitch - XL Double Sided - 7.9mm Wide
Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 7.9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide
Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide on the Small Parts and Bearings website.
You may also be interested in
Pulleys Timing XL Pitch 5.08mm
Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel on the Small Parts and Bearings website.
Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Aluminium alloy. Finished bore with set screw locking.
Related Information:
There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Insert
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.
Related Information:
There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Insert on the Small Parts and Bearings website.
Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.
Related Information:
There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore on the Small Parts and Bearings website.
Clamps - Timing Belt
Used for locking the ends of timing belt lengths used in reciprocating applications
Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.
Related Information:
There is also a good range of Clamps - Timing Belt on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL - 19.1mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 19.1mm (3/4 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 19.1mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL - 4.8mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 4.8mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL - 6.4mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 6.4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL - 7.9mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 7.93mm (5/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 7.9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 9.53mm (3/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide
PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs comliant.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.032mm Pitch - MXL Double Sided - 6.4mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.032mm Pitch - MXL Double Sided - 6.4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT2 - 115mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 115mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT2 - 40mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 40mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT2 - 55mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 55mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT2 - 85mm Wide
GT2 Series Metric Timing Belts
Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 85mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT2 - 16mm Wide
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 16mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT2 - 4mm Wide
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. For easy ready selected sets of timing belts and pulleys please see the HES website.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT2 - 6mm Wide
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT2 - 9mm Wide
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT2 - Clean - 6mm Wide
PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - Clean - 6mm Wide on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125388 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
