Belts Timing T5 5mm Categories

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 10mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 12mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 15mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 16mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 20mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 6mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

Belts to suit 5.000 Pitch T Pulleys - 10mm wide

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch T5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch T5 - 10mm Wide - Through Bore.

Related Information:

Double Sided Belts to suit 5.000 Pitch T Pulleys - 10mm wide

Belts to suit 5.000 Pitch T Pulleys - 16mm wide

There is also a good range of Pulleys - Timing 5.000mm Pitch T5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch T5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch T5 - 16mm Wide - Through Bore.

Related Information:

Double Sided Belts to suit 5.000 Pitch T Pulleys - 16mm wide

Belts to suit 5.000 Pitch T Pulleys - 25mm wide

There is also a good range of Pulleys - Timing 5.000mm Pitch T5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch T5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 25.0mm to 25.4mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch T5 - 25mm Wide - Through Bore.

Related Information:

Belts to suit 5.000 Pitch T Pulleys

There is also a good range of Pulleys - Timing 5.000mm Pitch T5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium.

Related Information:

Steel Flanges to suit T5 series pulley stock

Aluminium Flanges to suit T5 series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

All 5mm Pitch Pulleys - Choose width and pitch style carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Double Sided

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully

All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Standard

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully

All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Standard on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Double Sided

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully

All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Standard

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully

All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Standard on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Double Sided

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully

All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Standard

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully

All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Standard on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 38.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 38.1mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 1.500mm Pitch TN15 Bando - 15mm Wide

Also see combined categories:
All 1.5mm Pitch Timing Belts

TN15 Series Bando Timing Belts - Limited Range. Enquire for sizes not listed.

Belt working load should be rated at approximately 1/15th of their ultimate breaking strength. Overall Height (H1) - 1.3mm. Tooth Height (H2) - 0.7mm. Pitch (P) - 1.500mm. Pitch (P) - 1.500mm.

Related Information:

There is also a good range of Belts - Metric Timing - 1.500mm Pitch TN15 Bando - 15mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 2.500mm Pitch T2.5 - 10mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.500mm Pitch T2.5 - 10mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 2.500mm Pitch T2.5 - 12mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.500mm Pitch T2.5 - 12mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 2.500mm Pitch T2.5 - 4mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.500mm Pitch T2.5 - 4mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 2.500mm Pitch T2.5 - 6mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.500mm Pitch T2.5 - 6mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 2.500mm Pitch T2.5 - 8mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully

There is also a good range of Belts - Metric Timing - 2.500mm Pitch T2.5 - 8mm Wide on the Small Parts and Bearings website.

Belts - Inch Timing - 12.700mm Pitch - H - 9.5mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 9.5mm Wide.

Related Information:

All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully

All 2.032mm MXL Pitch Pulleys - Choose width carefully

There is also a good range of Belts - Inch Timing - 12.700mm Pitch - H - 9.5mm Wide on the Small Parts and Bearings website.

Belts - Inch Timing - 2.032mm Pitch MXL - 9.5mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 9.53mm (3/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 9.5mm Wide on the Small Parts and Bearings website.

Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Double Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

All 5.08mm XL Pitch Timing Pulleys - Choose width carefully

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

Belts to suit 5.000 Pitch AT Pulleys - 10mm wide

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore.

Related Information:

Belts to suit 5.000 Pitch AT Pulleys - 16mm wide

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore.

Related Information:

Belts to suit 5.000 Pitch AT Pulleys - 25mm wide

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 25mm Wide - Through Bore.

Related Information:

Belts to suit 5.000 Pitch AT Pulleys

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium.

Related Information:

Aluminium Flanges to suit AT 5mm series pulley stock

Steel Flanges to suit AT 5mm series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium on the Small Parts and Bearings website.

Pulleys - Timing 9.525mm Pitch L - 12.7mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 9.525mm Pitch L - 12.7mm Wide - Taperlock.

Related Information:

Belts to suit 9.525 Pitch L Pulleys - 12mm wide

Taperlock Bushings

Belts to suit 9.525 Pitch L Pulleys - 19mm wide

There is also a good range of Pulleys - Timing 9.525mm Pitch L - 12.7mm Wide - Taperlock on the Small Parts and Bearings website.

Pulleys - Timing 9.525mm Pitch L - 19.1mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 9.525mm Pitch L - 19.1mm Wide - Taperlock.

Related Information:

Taperlock Bushings

Belts to suit 9.525 Pitch L Pulleys - 25mm wide

There is also a good range of Pulleys - Timing 9.525mm Pitch L - 19.1mm Wide - Taperlock on the Small Parts and Bearings website.

Pulleys - Timing 9.525mm Pitch L - 25.4mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 9.525mm Pitch L - 25.4mm Wide - Taperlock.

Related Information:

Taperlock Bushings

Belts to suit 9.525 Pitch L Pulleys - 12mm wide

There is also a good range of Pulleys - Timing 9.525mm Pitch L - 25.4mm Wide - Taperlock on the Small Parts and Bearings website.

Pulleys - Timing 9.525mm Pitch L - 12.7mm Wide - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:

Double Sided Belts to suit 9.525 Pitch L Pulleys - 12mm wide

Belts to suit 9.525 Pitch L Pulleys - 19mm wide

There is also a good range of Pulleys - Timing 9.525mm Pitch L - 12.7mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 9.525mm Pitch L - 19.1mm Wide - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:

Double Sided Belts to suit 9.525 Pitch L Pulleys - 19mm wide

Belts to suit 9.525 Pitch L Pulleys - 25mm wide

There is also a good range of Pulleys - Timing 9.525mm Pitch L - 19.1mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 9.525mm Pitch L - 25.4mm Wide - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:

Belts to suit 9.525 Pitch L Pulleys

There is also a good range of Pulleys - Timing 9.525mm Pitch L - 25.4mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing Stock 9.525mm Pitch L - Aluminium

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 9.525mm Pitch L - Aluminium.

Related Information:

Aluminium Flanges to suit L series pulley stock

Steel Flanges to suit L series pulley stock

There is also a good range of Pulleys - Timing Stock 9.525mm Pitch L - Aluminium on the Small Parts and Bearings website.

Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel.

Related Information:

Belts to suit 9.525 Pitch L Pulleys

Aluminium Flanges to suit L series pulley stock

Steel Flanges to suit L series pulley stock

There is also a good range of Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel on the Small Parts and Bearings website.

Pulleys - Timing 2.500mm Pitch T2.5 - 6mm Wide - Through Bore

Also see combined categories:
All 2.5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 2.500mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium Alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing 2.500mm Pitch T2.5 - 6mm Wide - Through Bore.

Related Information:

Belts to suit 2.500 Pitch T Pulleys - 6mm wide