Belts Timing T2.5 2.5mm Categories
Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide
T Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.
Related Information:
There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.500mm Pitch - T2.5 - 12mm Wide
T Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.
Related Information:
There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 12mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.500mm Pitch - T2.5 - 18mm Wide
T Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.
Related Information:
There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 18mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide
T Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.
Related Information:
There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide
T Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.
Related Information:
There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide
T Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.
Related Information:
There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide on the Small Parts and Bearings website.
You may also be interested in
Pulleys Timing T2.5 2.5mm
Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
This category may be available in the new MBA online store at Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium.
Related Information:
There is also a good range of Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore
Timing Pulleys to suit T Series 2.500mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Aluminium Alloy. Finished through bore ready to assemble. Set screw locking. This category may be available in the new MBA online store at Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore on the Small Parts and Bearings website.
Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium
Use with timing pulley stock to custom make your own pulleys
This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium.
Related Information:
There is also a good range of Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide on the Small Parts and Bearings website.
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT - 115mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 115mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT - 170mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 170mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT - 40mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 40mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT - 55mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 55mm Wide on the Small Parts and Bearings website.
Belts - Timing - 14.000mm Pitch - GT - 85mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 85mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT - 3mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 3mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT - 4mm Wide
GT2 and GT3 Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 4mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT - 6mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT - 9mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 2.000mm Pitch - GT - Clean - 6mm Wide
PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Related Information:
There is also a good range of Belts - Timing - 2.000mm Pitch - GT - Clean - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 3.000mm Pitch - GT - 15mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 15mm Wide on the Small Parts and Bearings website.
Belts - Timing - 3.000mm Pitch - GT - 6mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 3.000mm Pitch - GT - 9mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 3.000mm Pitch - GT - Double Sided - 6mm Wide
GT2 and GT3 Series Metric Timing Belts Double Sided
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Timing - 3.000mm Pitch - GT - Double Sided - 6mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - GT - 15mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - GT - 15mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - GT - 25mm Wide
GT2 and GT3 Series Metric Timing Belts.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 replaces GT2 as GT2 stock is depleted. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - GT - 25mm Wide on the Small Parts and Bearings website.
Belts - Timing - 5.000mm Pitch - GT - 9mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Timing - 5.000mm Pitch - GT - 9mm Wide on the Small Parts and Bearings website.
Belts - Timing - 8.000mm Pitch - GT - 12mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.
Related Information:
There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 12mm Wide on the Small Parts and Bearings website.
Belts - Timing - 8.000mm Pitch - GT - 20mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.
Related Information:
There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 20mm Wide on the Small Parts and Bearings website.
Belts - Timing - 8.000mm Pitch - GT - 30mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.
Related Information:
There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 30mm Wide on the Small Parts and Bearings website.
Belts - Timing - 8.000mm Pitch - GT - 50mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.
Related Information:
There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 50mm Wide on the Small Parts and Bearings website.
Belts - Timing - 8.000mm Pitch - GT - 85mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.
Related Information:
There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 85mm Wide on the Small Parts and Bearings website.
Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide
Standard Series Timing Belts 12.700mm or 0.500 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide.
Related Information:
There is also a good range of Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Catalogue
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Charity
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
McMaster Carr Cross Reference PDF
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 204479 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
