Miniature Bearings Australia Pty Ltd

Belts Timing S8m 8mm Categories


Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide
Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide
Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch S8M - 30mm Wide
Belts - Metric Timing - 8.000mm Pitch S8M - 30mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch S8M - 30mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch S8M - 40mm Wide
Belts - Metric Timing - 8.000mm Pitch S8M - 40mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch S8M - 40mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 2.500mm Pitch T2.5 - 8mm Wide
Belts - Metric Timing - 2.500mm Pitch T2.5 - 8mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.500mm Pitch T2.5 - 8mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch GT - 12mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 12mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch GT - 12mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch GT - 20mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 20mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch GT - 20mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch GT - 30mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 30mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch GT - 30mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch GT - 50mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 50mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch GT - 50mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch GT - 85mm Wide
Belts - Metric Timing - 8.000mm Pitch GT - 85mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch GT - 85mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch HTD - 20mm Wide
Belts - Metric Timing - 8.000mm Pitch HTD - 20mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch HTD - 20mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch HTD - 25mm Wide
Belts - Metric Timing - 8.000mm Pitch HTD - 25mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch HTD - 25mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch HTD - 30mm Wide
Belts - Metric Timing - 8.000mm Pitch HTD - 30mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch HTD - 30mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch HTD - 40mm Wide
Belts - Metric Timing - 8.000mm Pitch HTD - 40mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch HTD - 40mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch HTD - 50mm Wide
Belts - Metric Timing - 8.000mm Pitch HTD - 50mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch HTD - 50mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 8.000mm Pitch HTD - 85mm Wide
Belts - Metric Timing - 8.000mm Pitch HTD - 85mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 8.000mm Pitch HTD - 85mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 12.700mm Pitch - H - 50.8mm Wide
Belts - Inch Timing - 12.700mm Pitch - H - 50.8mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 50.8mm Wide.

Related Information:

There is also a good range of Belts - Inch Timing - 12.700mm Pitch - H - 50.8mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide
Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 5.080mm Pitch XL - 12.7mm Wide
Belts - Inch Timing - 5.080mm Pitch XL - 12.7mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch. 12mm or 12.7mm width.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 12.7mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 5.080mm Pitch XL - 7.9mm Wide
Belts - Inch Timing - 5.080mm Pitch XL - 7.9mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 7.9mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Double Sided
Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Double Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Double Sided on the Small Parts and Bearings website.


Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Single Sided
Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Single Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 6.4mm Wide - Single Sided on the Small Parts and Bearings website.


Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Double Sided
Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Double Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Double Sided on the Small Parts and Bearings website.


Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided
Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 5.080mm Pitch XL - 9.5mm Wide - Single Sided on the Small Parts and Bearings website.


Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 30mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 50mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock
Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock.

Related Information:

There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.


Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.