Belts Timing S3m 3mm Categories
Belts - Metric Timing - 3.000mm Pitch S3M - 10mm Wide
S3M Series Timing Belts
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch S3M - 10mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch S3M - 15mm Wide
S3M Series Timing Belts
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch S3M - 15mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch S3M - 6mm Wide
S3M Series Timing Belts
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch S3M - 6mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 2.000mm Pitch GT - 3mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 3mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 1.000mm Pitch - T01M - 3mm Wide
Miniature 1mm series timing belts. 3mm Wide +/- 0.2mm
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Pitch (P) - 1.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 1.000mm Pitch - T01M - 3mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch GT - 15mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 15mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch GT - 9mm Wide
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 9mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch HTD - 12mm Wide
HTD Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch HTD - 12mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch HTD - 15mm Wide
HTD Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch HTD - 15mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch HTD - 6mm Wide
HTD Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Pitch (P) - 3.000mm. This category may be available in the new MBA online store at Belts - Metric Timing - 3.000mm Pitch HTD - 6mm Wide.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch HTD - 6mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch HTD - 9mm Wide
HTD Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch HTD - 9mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Double Sided
GT2 and GT3 Series Metric Timing Belts Double Sided
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Double Sided on the Small Parts and Bearings website.
Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Single Sided
GT2 and GT3 Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Single Sided on the Small Parts and Bearings website.
Clamps - Timing Belt
Used for locking the ends of timing belt lengths used in reciprocating applications
Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.
Related Information:
There is also a good range of Clamps - Timing Belt on the Small Parts and Bearings website.
Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide on the Small Parts and Bearings website.
Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide on the Small Parts and Bearings website.
Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide on the Small Parts and Bearings website.
Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide on the Small Parts and Bearings website.
Belts - Inch Timing - 9.525mm Pitch L - 38.1mm Wide
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 38.1mm Wide on the Small Parts and Bearings website.
Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Standard
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Standard on the Small Parts and Bearings website.
Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Standard
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Standard on the Small Parts and Bearings website.
Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Standard
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Standard on the Small Parts and Bearings website.
Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Double Sided
Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Double Sided on the Small Parts and Bearings website.
Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Double Sided
Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Double Sided on the Small Parts and Bearings website.
Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Double Sided
Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).
Related Information:
There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Double Sided on the Small Parts and Bearings website.
Pulleys - Timing 1.000mm Pitch 3mm Wide - Through Bore
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy. With set screw. This category may be available in the new MBA online store at Pulleys - Timing 1.000mm Pitch 3mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing 1.000mm Pitch 3mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing 2.000mm Pitch GT - 3mm Wide - Through Bore
Timing Pulleys to suit GT 2mm Pitch Timing Belts.Use with GT2 or GT3 type belts.
Aluminium Alloy. Finished Bores with Set Screws. This category may be available in the new MBA online store at Pulleys - Timing 2.000mm Pitch GT - 3mm Wide - Through Bore.
Related Information:
There is also a good range of Pulleys - Timing 2.000mm Pitch GT - 3mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.
Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium.
Related Information:
There is also a good range of Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium on the Small Parts and Bearings website.
Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium.
Related Information:
There is also a good range of Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.
Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 14.000mm Pitch GT - 170mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 170mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 14.000mm Pitch GT - 40mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 40mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 14.000mm Pitch GT - 55mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 55mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 14.000mm Pitch GT - 85mm Wide
GT2 and GT3 Series Metric Timing Belts
Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 85mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 2.000mm Pitch GT - 4mm Wide
GT2 and GT3 Series Metric Timing Belts.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.
Related Information:
There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 4mm Wide on the Small Parts and Bearings website.
Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Clean
PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Related Information:
There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Clean on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
