Miniature Bearings Australia Pty Ltd

Belts Timing Mxl Pitch Categories


Belts - Inch Timing - 2.032mm Pitch MXL - 12.7mm Wide
Belts - Inch Timing - 2.032mm Pitch MXL - 12.7mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 12.7mm (1/2 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 12.7mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Clean
Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Clean

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs compliant.

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Clean on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Standard
Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Standard

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 3.2mm Wide - Standard on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide
Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 6.4mm Wide - Double Sided
Belts - Inch Timing - 2.032mm Pitch MXL - 6.4mm Wide - Double Sided

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 6.4mm Wide - Double Sided on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 6.4mm Wide - Single Sided
Belts - Inch Timing - 2.032mm Pitch MXL - 6.4mm Wide - Single Sided

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 6.4mm Wide - Single Sided on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 7.9mm Wide
Belts - Inch Timing - 2.032mm Pitch MXL - 7.9mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 7.93mm (5/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 7.9mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.032mm Pitch MXL - 9.5mm Wide
Belts - Inch Timing - 2.032mm Pitch MXL - 9.5mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 9.53mm (3/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.032mm Pitch MXL - 9.5mm Wide on the Small Parts and Bearings website.


You may also be interested in

Pulleys Timing MXL Pitch


Pulleys - Timing 2.032mm Pitch MXL - 3.2mm Wide - Through Bore
Pulleys - Timing 2.032mm Pitch MXL - 3.2mm Wide - Through Bore

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 3.0 to 3.2mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing 2.032mm Pitch MXL - 3.2mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 2.032mm Pitch MXL - 3.2mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - EZ-Lock
Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - EZ-Lock

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial. Socket Cap Screw is Supplied with Pulley. Aluminium Alloy. This category may be available in the new MBA online store at Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - EZ-Lock.

Related Information:

There is also a good range of Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - EZ-Lock on the Small Parts and Bearings website.


Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Insert
Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Insert

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With brass insert.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Insert.

Related Information:

There is also a good range of Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Insert on the Small Parts and Bearings website.


Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Plain
Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. No locking device.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Plain.

Related Information:

There is also a good range of Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Through Bore
Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Through Bore

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 2.032mm Pitch MXL - 9.5mm Wide - Through Bore
Pulleys - Timing 2.032mm Pitch MXL - 9.5mm Wide - Through Bore

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 9.5 to 9.6mm wide

2.032mm metric is equivalent to 0.080 pitch imperial. Aluminium Alloy. Finished Through Bore Ready To Assemble. This category may be available in the new MBA online store at Pulleys - Timing 2.032mm Pitch MXL - 9.5mm Wide - Through Bore.

Related Information:

There is also a good range of Pulleys - Timing 2.032mm Pitch MXL - 9.5mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Metal Hub
Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Metal Hub

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With aluminium hub.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

There is also a good range of Pulleys - Timing 2.032mm Pitch MXL - 6.4mm Wide - Plastic - Metal Hub on the Small Parts and Bearings website.


Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium
Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium on the Small Parts and Bearings website.


Clamps


Clamps - Timing Belt
Clamps - Timing Belt


Used for locking the ends of timing belt lengths used in reciprocating applications

Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.

Related Information:

There is also a good range of Clamps - Timing Belt on the Small Parts and Bearings website.


Belts Timing 40DP LT Pitch


Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 3.2mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide
Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Inch Timing - 2.073mm Pitch 40DP - 7.9mm Wide on the Small Parts and Bearings website.


Belts Timing AT10 10mm


Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 16mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 20mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 32mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.


Belts Timing AT5 5mm


Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 -14mm


Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 115mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 14.000mm Pitch GT - 170mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 170mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 14.000mm Pitch GT - 40mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 40mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 14.000mm Pitch GT - 55mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 55mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 14.000mm Pitch GT - 85mm Wide
Belts - Metric Timing - 14.000mm Pitch GT - 85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 14.000mm Pitch GT - 85mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 2mm


Belts - Metric Timing - 2.000mm Pitch GT - 3mm Wide
Belts - Metric Timing - 2.000mm Pitch GT - 3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 3mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 2.000mm Pitch GT - 4mm Wide
Belts - Metric Timing - 2.000mm Pitch GT - 4mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 4mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Clean
Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Clean

Also see combined categories:
All 2mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Clean on the Small Parts and Bearings website.


Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Standard
Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Standard

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 6mm Wide - Standard on the Small Parts and Bearings website.


Belts - Metric Timing - 2.000mm Pitch GT - 9mm Wide
Belts - Metric Timing - 2.000mm Pitch GT - 9mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 2.000mm Pitch GT - 9mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 3mm


Belts - Metric Timing - 3.000mm Pitch GT - 15mm Wide
Belts - Metric Timing - 3.000mm Pitch GT - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 15mm Wide on the Small Parts and Bearings website.


Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Double Sided
Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Double Sided

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts Double Sided

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Double Sided on the Small Parts and Bearings website.


Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Single Sided
Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Single Sided

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 6mm Wide - Single Sided on the Small Parts and Bearings website.


Belts - Metric Timing - 3.000mm Pitch GT - 9mm Wide
Belts - Metric Timing - 3.000mm Pitch GT - 9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 3.000mm Pitch GT - 9mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 5mm


Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide
Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.