International currencies? Visit the New MBA Store
Miniature Bearings Australia Pty Ltd

Belts Timing At5 5mm Categories

Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 10mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 12mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 16mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 20mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 6mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide
Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch AT5 - 8mm Wide on the Small Parts and Bearings website.

You may also be interested in

Pulleys Timing AT5 5mm


Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore
Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys - 10mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore
Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys - 16mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing 5.000mm Pitch AT5 - 25mm Wide - Through Bore
Pulleys - Timing 5.000mm Pitch AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch AT5 - 25mm Wide - Through Bore.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys - 25mm wide
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing 5.000mm Pitch AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.

Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium
Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys
Aluminium Flanges to suit AT 5mm series pulley stock
Steel Flanges to suit AT 5mm series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch S5M - 10mm Wide
Belts - Metric Timing - 5.000mm Pitch S5M - 10mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S5M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch S5M - 10mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch S5M - 15mm Wide
Belts - Metric Timing - 5.000mm Pitch S5M - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S5M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch S5M - 15mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch S5M - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch S5M - 25mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S5M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch S5M - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch HTD - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch HTD - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Pitch (P) - 5.000mm. This category may be available in the new MBA online store at Belts - Metric Timing - 5.000mm Pitch HTD - 25mm Wide.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch HTD - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch HTD - 30mm Wide
Belts - Metric Timing - 5.000mm Pitch HTD - 30mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Pitch (P) - 5.000mm. This category may be available in the new MBA online store at Belts - Metric Timing - 5.000mm Pitch HTD - 30mm Wide.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch HTD - 30mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch HTD - 6mm Wide
Belts - Metric Timing - 5.000mm Pitch HTD - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Pitch (P) - 5.000mm. This category may be available in the new MBA online store at Belts - Metric Timing - 5.000mm Pitch HTD - 6mm Wide.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch HTD - 6mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch GT - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch GT - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 replaces GT2 as GT2 stock is depleted. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch GT - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 10mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 10mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 12mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 12mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 15mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 15mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 16mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 16mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 20mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 20mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 25mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 6mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 6mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide
Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch - T5 - 8mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide
Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch GT - 15mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch GT - 9mm Wide
Belts - Metric Timing - 5.000mm Pitch GT - 9mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch GT - 9mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch HTD - 15mm Wide - Single Sided
Belts - Metric Timing - 5.000mm Pitch HTD - 15mm Wide - Single Sided

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch HTD - 15mm Wide - Single Sided on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch HTD - 9mm Wide - Single Sided
Belts - Metric Timing - 5.000mm Pitch HTD - 9mm Wide - Single Sided

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch HTD - 9mm Wide - Single Sided on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch HTD - 15mm Wide - Double Sided
Belts - Metric Timing - 5.000mm Pitch HTD - 15mm Wide - Double Sided

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch HTD - 15mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Metric Timing - 5.000mm Pitch HTD - 9mm Wide - Double Sided
Belts - Metric Timing - 5.000mm Pitch HTD - 9mm Wide - Double Sided

Also see combined categories:
All 5mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Pitch (P) - 5.000mm.

Related Information:
All 5mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 5.000mm Pitch HTD - 9mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.

Clamps - Timing Belt
Clamps - Timing Belt


Used for locking the ends of timing belt lengths used in reciprocating applications

Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Clamps - Timing Belt on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 38.1mm Wide
Belts - Inch Timing - 9.525mm Pitch L - 38.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 38.1mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 3.000mm Pitch S3M - 15mm Wide
Belts - Metric Timing - 3.000mm Pitch S3M - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S3M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 3.000mm Pitch S3M - 15mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide
Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 8.000mm Pitch S8M - 15mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide
Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

S8M Series Timing Belts

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.

Related Information:
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 8.000mm Pitch S8M - 25mm Wide on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Standard
Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Standard

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Standard on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Standard
Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Standard

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Standard on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Standard
Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Standard

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Standard on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Double Sided
Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Double Sided

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 12.7mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Double Sided
Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Double Sided

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 19.1mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Double Sided
Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Double Sided

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:
All 9.525mm L Pitch Timing Pulleys Through Bore - Choose width carefully
All 9.525mm L Pitch Timing Pulleys Taperlock - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 9.525mm Pitch L - 25.4mm Wide - Double Sided on the Small Parts and Bearings website.

Belts - Inch Timing - 12.700mm Pitch - H - 9.5mm Wide
Belts - Inch Timing - 12.700mm Pitch - H - 9.5mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Inch Timing - 12.700mm Pitch - H - 9.5mm Wide.

Related Information:
All 12.7mm H Pitch Through Bore Timing Pulleys - Choose width carefully
All 12.7mm H Pitch Taperlock Timing Pulleys - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Inch Timing - 12.700mm Pitch - H - 9.5mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 10.000mm Pitch - T10 - 25mm Wide
Belts - Metric Timing - 10.000mm Pitch - T10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:
All 10mm Pitch Timing Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 10.000mm Pitch - T10 - 25mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 14.000mm Pitch HTD - 115mm Wide
Belts - Metric Timing - 14.000mm Pitch HTD - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 14.000mm Pitch HTD - 115mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 14.000mm Pitch HTD - 55mm Wide
Belts - Metric Timing - 14.000mm Pitch HTD - 55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 14.000mm Pitch HTD - 55mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 14.000mm Pitch HTD - 85mm Wide
Belts - Metric Timing - 14.000mm Pitch HTD - 85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 14.000mm.

Related Information:
All 14mm Pitch Taperlock Pulleys - Choose width carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 14.000mm Pitch HTD - 85mm Wide on the Small Parts and Bearings website.

Belts - Metric Timing - 3.000mm Pitch HTD - 15mm Wide
Belts - Metric Timing - 3.000mm Pitch HTD - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Pitch (P) - 3.000mm.

Related Information:
All 3mm Pitch Pulleys - Choose width and pitch style carefully
Timing Belts Catalogue PDF

There is also a good range of Belts - Metric Timing - 3.000mm Pitch HTD - 15mm Wide on the Small Parts and Bearings website.




Main Pages

5 Axis Machine Tool Bearings

5 Axis Machine Tool Bearings
 About Us

About Us
 Acetal Bearings PDF

Acetal Bearings PDF
 ADR and SKF PDF

ADR and SKF PDF
 Anderton Circlips Cross Reference PDF

Anderton Circlips Cross Reference PDF
 Ball Lock Pins PDF

Ball Lock Pins PDF
 Balls List

Balls List
 Balls PDF

Balls PDF
 Barden Bearings Cross Reference PDF

Barden Bearings Cross Reference PDF
 Bearings List

Bearings List
 Brands

Brands
 Ceramic Bearings PDF

Ceramic Bearings PDF
 Circlips PDF

Circlips PDF
 Clearance Items List

Clearance Items List
 Clevis Pins PDF

Clevis Pins PDF
 Contact Us

Contact Us
 Corrosion Resistant Bearings PDF

Corrosion Resistant Bearings PDF
 Dental Bearings

Dental Bearings
 Disc Springs PDF

Disc Springs PDF
 Distributor Locations

Distributor Locations
 Dowel Pins PDF

Dowel Pins PDF
 Dowel Pins

Dowel Pins
 Economy Bearings PDF

Economy Bearings PDF
 Essentra Cross Reference PDF

Essentra Cross Reference PDF
 Flocast Cross Reference PDF

Flocast Cross Reference PDF
 Freight Rates and Shipping Times

Freight Rates and Shipping Times
 Frequently Asked Questions

Frequently Asked Questions
 General Information about MBA

General Information about MBA
 Hammer Drive Pins PDF

Hammer Drive Pins PDF
 High Speed Bearings PDF

High Speed Bearings PDF
 Hobby Clearance

Hobby Clearance
 Hobby Information

Hobby Information
 K&S Metals Cross Reference PDF

K&S Metals Cross Reference PDF
 Key Steel PDF

Key Steel PDF
 Knobs PDF

Knobs PDF
 Large Bearings

Large Bearings
 Leveling Mounts PDF

Leveling Mounts PDF
 Mailorder Form

Mailorder Form
 Metallic Bushes PDF

Metallic Bushes PDF
 Miniature Precison Bearings Cross Reference PDF

Miniature Precison Bearings Cross Reference PDF
 Miscellaneous Brands Cross Reference PDF

Miscellaneous Brands Cross Reference PDF
 Nordex Cross Reference PDF

Nordex Cross Reference PDF
 NSK and NTN Cross Reference PDF

NSK and NTN Cross Reference PDF
 Ondrives Cross Reference PDF

Ondrives Cross Reference PDF
 O-Rings PDF

O-Rings PDF
 Pins PDF

Pins PDF
 Plastic Bearings PDF

Plastic Bearings PDF
 Polyvee Belts and Pulleys PDF

Polyvee Belts and Pulleys PDF
 Precision Shim Washers PDF

Precision Shim Washers PDF
 Privacy

Privacy
 Push On and Push In Rings PDF

Push On and Push In Rings PDF
 Reid Supply Cross Reference PDF

Reid Supply Cross Reference PDF
 Rod & Tube PDF

Rod & Tube PDF
 Roll Pins PDF

Roll Pins PDF
 Satellite Reaction Wheels

Satellite Reaction Wheels
 Screws PDF

Screws PDF
 SDP-SI Designatronics Cross Reference PDF

SDP-SI Designatronics Cross Reference PDF
 Seeger Circlips Cross Reference PDF

Seeger Circlips Cross Reference PDF
 Shaft Collars PDF

Shaft Collars PDF
 Shim Sheet PDF

Shim Sheet PDF
 Shoulder Screws PDF

Shoulder Screws PDF
 Sintered Bronze Bushes PDF

Sintered Bronze Bushes PDF
 Sintered Bronze Cross Reference PDF

Sintered Bronze Cross Reference PDF
 Small Bearings

Small Bearings
 Small Parts Inc Cross Reference PDF

Small Parts Inc Cross Reference PDF
 Snap Rings PDF

Snap Rings PDF
 Socket Set Screws PDF

Socket Set Screws PDF
 Solid Bronze Bushes PDF

Solid Bronze Bushes PDF
 Spring Steel Strip PDF

Spring Steel Strip PDF
 Springs PDF

Springs PDF
 Standard Ball Bearing Range PDF

Standard Ball Bearing Range PDF
 Super Precision Bearings PDF

Super Precision Bearings PDF
 Taper Pins PDF

Taper Pins PDF
 Technical Information

Technical Information
 Terms

Terms
 Thrust Bearings PDF

Thrust Bearings PDF
 Thumb Screws and Nuts PDF

Thumb Screws and Nuts PDF
 Timing Belts and Pulleys Cross Reference PDF

Timing Belts and Pulleys Cross Reference PDF
 Timing Belts PDF

Timing Belts PDF
 Timing Pulley Stock PDF

Timing Pulley Stock PDF
 Timing Pulleys PDF

Timing Pulleys PDF
 Vibration Mounts PDF

Vibration Mounts PDF
 Washers and Spacers PDF

Washers and Spacers PDF
 Wave Washers PDF

Wave Washers PDF
 Domains

Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227673 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

 
5 Axis Machine Tool Bearings ADR and SKF PDF (Link) About Us Acetal Bearings PDF (Link) Anderton Circlips Cross Reference PDF (Link) Ball Lock Pins PDF (Link) Balls List
Paypal Accepted
Paypal
Secure Checkout
Balls PDF (Link) Barden Bearings Cross Reference PDF (Link) Bearings List Bearings and Balls Brands Ceramic Bearings PDF (Link) Circlips PDF (Link) Clamping and Locking
Visa Card Accepted
Visa
Secure Checkout
Clearance Items List Clevis Pins PDF (Link) Contact Us Control Products Corrosion Resistant Bearings PDF (Link) Dental Bearings Dental Disc Springs PDF (Link)
Master Card Accepted
Mastercard
Secure Checkout
Distributor Locations Domains Dowel Pins PDF (Link) Dowel Pins Economy Bearings PDF (Link) Essentra Cross Reference PDF (Link) Fasteners Flocast Cross Reference PDF (Link)
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Freight Rates and Shipping Times (Link) Frequently Asked Questions Games and Toys Gears General Information about MBA (Link) Hammer Drive Pins PDF (Link) High Speed Bearings PDF (Link) Hobby Clearance (Link)
Amex Accepted
Amex
Secure Checkout
Hobby Information K&S Metals Cross Reference PDF (Link) Key Steel PDF (Link) Kits Knobs PDF (Link) Large Bearings (Link) Leveling Mounts PDF (Link) Linear Bearings and Systems
Paypal Accepted
Paypal
Secure Checkout
Literature Lubricants Magnets Mailorder Form (Link) Materials Metallic Bushes PDF (Link) Miniature Precison Bearings Cross Reference PDF (Link) Miscellaneous Brands Cross Reference PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Miscellaneous Motors and Gearboxes NSK and NTN Cross Reference PDF (Link) Nordex Cross Reference PDF (Link) O-Rings PDF (Link) Ondrives Cross Reference PDF (Link) Packing and Display Pins PDF (Link)
Master Card Accepted
Mastercard
Secure Checkout
Plastic Bearings PDF (Link) Polyvee Belts and Pulleys PDF (Link) Power Transmission Precision Shim Washers PDF (Link) Privacy Push On and Push In Rings PDF (Link) Reid Supply Cross Reference PDF (Link) Rod & Tube PDF (Link)
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Roll Pins PDF (Link) SDP-SI Designatronics Cross Reference PDF (Link) Satellite Reaction Wheels Screws PDF (Link) Seals Seeger Circlips Cross Reference PDF (Link) Shaft Collars PDF (Link) Shaft Couplings
Amex Accepted
Amex
Secure Checkout
Shafting Shim Sheet PDF (Link) Shoulder Screws PDF (Link) Sintered Bronze Bushes PDF (Link) Sintered Bronze Cross Reference PDF (Link) Small Bearings (Link) Small Parts Inc Cross Reference PDF (Link) Snap Rings PDF (Link)
Paypal Accepted
Paypal
Secure Checkout
Socket Set Screws PDF (Link) Solid Bronze Bushes PDF (Link) Spring Steel Strip PDF (Link) Springs PDF (Link) Springs and Retraction Standard Ball Bearing Range PDF (Link) Storage Super Precision Bearings PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Taper Pins PDF (Link) Technical Information Terms Thrust Bearings PDF (Link) Thumb Screws and Nuts PDF (Link) Timing Belts PDF (Link) Timing Belts and Pulleys Cross Reference PDF (Link) Timing Belts and Pulleys
Master Card Accepted
Mastercard
Secure Checkout
Timing Pulley Stock PDF (Link) Timing Pulleys PDF (Link) Tools Vibration Control Vibration Mounts PDF (Link) Washers and Spacers PDF (Link) Wave Washers PDF (Link)

Products

Adjusters Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screw Accessories Ball Screws Ground
Paypal Accepted
Paypal
Secure Checkout
Ball Screws Nook Series Ball Screws Rolled Ball Splines Linear Ball Transfers Balls Ceramic Balls Metallic Balls Plastic Balls Rubber Bar and Rod Batteries
Visa Card Accepted
Visa
Secure Checkout
Bearings Angular Contact Bearings Automotive Bearings Ceramic Bearings Clutch Bearings Conveyor Bearings Cylindrical Roller Bearings Double Row Ball Bearings Flanged Ball Bearings Grooved Profile Bearings Housings
Master Card Accepted
Mastercard
Secure Checkout
Bearings Mounted Bearings Needle Roller Bearings One Way Clutch Bearings Pivot Bearings Plastic Bearings Plates Bearings Self Aligning Ball Bearings Single Row Ball Bearings Special Purpose Bearings Spherical Roller
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Bearings Stainless Special Grades Bearings Tapered Roller Bearings Thrust Bearings and Housings Insert Bearings for Dental Equipment Bearings for Housings Bearings for Skating Belts Poly Vee Belts Posi-Drive Belts Rounthane
Amex Accepted
Amex
Secure Checkout
Belts Timing 40DP LT Pitch Belts Timing AT10 10mm Belts Timing AT5 5mm Belts Timing GT2 -14mm Belts Timing GT2 2mm Belts Timing GT2 3mm Belts Timing GT2 5mm Belts Timing GT2 8mm Belts Timing H Pitch 12.7mm Belts Timing HTD -14mm
Paypal Accepted
Paypal
Secure Checkout
Belts Timing HTD 3mm Belts Timing HTD 5mm Belts Timing HTD 8mm Belts Timing L Pitch 9.53mm Belts Timing MXL Pitch Belts Timing S2M 2mm Belts Timing S3M 3mm Belts Timing S5M 5mm Belts Timing S8M 8mm Belts Timing T01 1mm
Visa Card Accepted
Visa
Secure Checkout
Belts Timing T015 1.5mm Belts Timing T10 10mm Belts Timing T2.5 2.5mm Belts Timing T5 5mm Belts Timing XL Pitch 5.08mm Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel
Master Card Accepted
Mastercard
Secure Checkout
Bushings Spherical Cable Ties Cable Cam Followers Castors Accessories Castors Plate Castors Stud Catalogues Catches Chain and Sprockets Ladder
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Chain and Sprockets Roller Channel Circlips Clamping Bushings Clamping Rings Clamps Clips Clutches Collars Couplings Geargrip
Amex Accepted
Amex
Secure Checkout
Couplings Helical and Slit Couplings Insert and Jaw Couplings K Type Couplings Other Couplings Rigid Cross Blocks Dampers Dual Vee Bearings Engineering and Hobby Rod Eyebolts
Paypal Accepted
Paypal
Secure Checkout
Fastening Bushings Flexible Shaft Gas Springs Gear Blanks Gear Racks Flexible Gearboxes Cross Axis Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open
Visa Card Accepted
Visa
Secure Checkout
Gears Cluster Gears Inch Bevel Gears Inch Mitre Gears Inch Racks Gears Inch Spur Gears Inch Worms Gears Metric Bevel Gears Metric Mitre Gears Metric Racks Gears Metric Spiral Mitre
Master Card Accepted
Mastercard
Secure Checkout
Gears Metric Spur Gears Metric Worms Gifts Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Shafting
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Hobby Wheels Hooks Housings for Ball Bearings Housings with Bearing Hubs Insulator Strips Insulators Isolators Keys and Keysteel Keys
Amex Accepted
Amex
Secure Checkout
Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Pointer Knobs Push Pull
Paypal Accepted
Paypal
Secure Checkout
Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Handle Latches Other Latches Paddle
Visa Card Accepted
Visa
Secure Checkout
Latches Quarter Turn Lazy Susans Leads and Connectors Leadscrews Levers Linear Bearing Housings Linear Bearings with Housing Linear Bearings Linear Slides Locking Assemblies
Master Card Accepted
Mastercard
Secure Checkout
Locking Bushings Lubricants General Purpose Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Magnets Rubber and Vinyl Motors DC Motors Stepper
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Motors Vibrating Mounts Base Mounts Bonded Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular
Amex Accepted
Amex
Secure Checkout
Mounts Wedge Nuts Dome Nuts Hex Nuts Lock for Bearings Nuts Lock Nuts Specialty Nuts Thumb Nuts Wing O-Rings for Dental Applications O-Rings
Paypal Accepted
Paypal
Secure Checkout
Oil Seals Pillars Pinion Wire Imperial Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Locating Pins Pull
Visa Card Accepted
Visa
Secure Checkout
Pins Roll Pins Taper Pins Wirelock Plugs Plungers Ball Plungers Indexing Plungers Spring Positioning Pressure Rollers Protective Packing and Sleeves
Master Card Accepted
Mastercard
Secure Checkout
Pulleys Flanges Pulleys Grooved Pulleys Idler Pulleys Poly Vee Pulleys Timing 40DP LT Pitch Pulleys Timing AT10 10mm Pulleys Timing AT5 5mm Pulleys Timing GT2 -14mm Pulleys Timing GT2 2mm Pulleys Timing GT2 3mm
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Pulleys Timing GT2 5mm Pulleys Timing GT2 8mm Pulleys Timing H Pitch 12.7mm Pulleys Timing HTD 3mm Pulleys Timing HTD 5mm Pulleys Timing HTD 8mm Pulleys Timing L Pitch 9.53mm Pulleys Timing MXL Pitch Pulleys Timing T01 1mm Pulleys Timing T10 10mm
Amex Accepted
Amex
Secure Checkout
Pulleys Timing T2.5 2.5mm Pulleys Timing T5 5mm Pulleys Timing XL Pitch 5.08mm Pulleys Vee RC Car and Buggy Wheels RC Propellers and Adaptors RC Spare Parts Ratchets and Pawls Robotic Wheels Rod Ends PTFE Lined
Paypal Accepted
Paypal
Secure Checkout
Rod Ends Plastic Rod Ends Stainless Steel Rod Ends Stamped Rod Ends Standard Rod Ends Studded Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head
Visa Card Accepted
Visa
Secure Checkout
Screws Coach Screws Countersunk Screws Grub Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping
Master Card Accepted
Mastercard
Secure Checkout
Screws Shoulder Screws Square Head Screws Thumb Screws Wood Seals and Sealing Sets Shaft Extenders and Reducers Shafting Aluminium Shafting General Purpose Shafting Precision Ground
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Shaftloc Shim Shock Absorbers Sleeves Snap Buttons Snaps Spacers Spare Part Boxes Spring Anchors Spring Motors
Amex Accepted
Amex
Secure Checkout
Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant Force Springs Die Springs Disc Springs Extension Springs General Springs Torsion
Paypal Accepted
Paypal
Secure Checkout
Spur Gear Stock Inch Square Shaft Stays Stops Spring Strip Stroke Rotary Bushings Studs Suction Cups Switches Tape
Visa Card Accepted
Visa
Secure Checkout
Tee Joints Tension Bushings Tensioners Thread Inserts Timing Belt Lengths Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits
Master Card Accepted
Mastercard
Secure Checkout
Tools Circlip Tools Cutting Tools Deburring Tools General Tools Pullers Tools Screw Extractors Tools Threading Tube and Tubing Turntables Universal Joints Single
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
V-Rings Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking
Amex Accepted
Amex
Secure Checkout
Washers Serrated Locking Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wheels RC Plane Wrenches Yoke Ends

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227673 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.