Miniature Bearings Australia Pty Ltd

Belts Timing 40dp Lt Pitch Categories


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide on the Small Parts and Bearings website.


You may also be interested in

Pulleys Timing 40DP LT Pitch


Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
Pulleys - Timing -  2.073mm Pitch - 40DP - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

This category may be available in the new MBA online store at Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Pulleys - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.


Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore
Pulleys - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore

Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.

Aluminium Alloy. Finished Through Bore Ready To Assemble.

Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore on the Small Parts and Bearings website.


Belts Timing GT2 5mm


Belts - Timing - 5.000mm Pitch - GT - 25mm Wide
Belts - Timing -  5.000mm Pitch - GT - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 replaces GT2 as GT2 stock is depleted. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - GT - 25mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 2mm


Belts - Timing - 2.000mm Pitch - GT - Clean - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT - Clean - 6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. GT3 will replace GT2 as stock is depleted. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT - Clean - 6mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 -14mm


Belts - Timing - 14.000mm Pitch - GT - 40mm Wide
Belts - Timing - 14.000mm Pitch - GT -  40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 40mm Wide on the Small Parts and Bearings website.


Belts Timing HTD -14mm


Belts - Timing - 14.000mm Pitch - HTD - 40mm Wide
Belts - Timing - 14.000mm Pitch - HTD -  40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

HTD Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - HTD - 40mm Wide on the Small Parts and Bearings website.


Belts Timing MXL Pitch


Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL - Clean - 3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs compliant.

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide on the Small Parts and Bearings website.


Belts Timing AT10 10mm


Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.


Belts Timing AT5 5mm


Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 -14mm


Belts - Timing - 14.000mm Pitch - GT - 115mm Wide
Belts - Timing - 14.000mm Pitch - GT - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 115mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT - 170mm Wide
Belts - Timing - 14.000mm Pitch - GT - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 170mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT - 55mm Wide
Belts - Timing - 14.000mm Pitch - GT -  55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 55mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT - 85mm Wide
Belts - Timing - 14.000mm Pitch - GT -  85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 14.000mm.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT - 85mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 2mm


Belts - Timing - 2.000mm Pitch - GT - 3mm Wide
Belts - Timing -  2.000mm Pitch - GT -  3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 3mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.000mm Pitch - GT - 4mm Wide
Belts - Timing -  2.000mm Pitch - GT -  4mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.000mm Pitch - GT - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT -  6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.000mm Pitch - GT - 9mm Wide
Belts - Timing -  2.000mm Pitch - GT -  9mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 2.000mm.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT - 9mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 3mm


Belts - Timing - 3.000mm Pitch - GT - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 15mm Wide on the Small Parts and Bearings website.


Belts - Timing - 3.000mm Pitch - GT - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 3.000mm Pitch - GT - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Timing - 3.000mm Pitch - GT - 9mm Wide on the Small Parts and Bearings website.


Belts - Timing - 3.000mm Pitch - GT - Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT - Double Sided -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts Double Sided

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 3.000mm.

Related Information:

There is also a good range of Belts - Timing - 3.000mm Pitch - GT - Double Sided - 6mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 5mm


Belts - Timing - 5.000mm Pitch - GT - 15mm Wide
Belts - Timing -  5.000mm Pitch - GT - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - GT - 15mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - GT - 9mm Wide
Belts - Timing -  5.000mm Pitch - GT -  9mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - GT - 9mm Wide on the Small Parts and Bearings website.


Belts Timing GT2 8mm


Belts - Timing - 8.000mm Pitch - GT - 12mm Wide
Belts - Timing -  8.000mm Pitch - GT -  12mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 8.000mm Pitch - GT - 20mm Wide
Belts - Timing -  8.000mm Pitch - GT -  20mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 20mm Wide on the Small Parts and Bearings website.


Belts - Timing - 8.000mm Pitch - GT - 30mm Wide
Belts - Timing -  8.000mm Pitch - GT -  30mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 30mm Wide on the Small Parts and Bearings website.


Belts - Timing - 8.000mm Pitch - GT - 50mm Wide
Belts - Timing -  8.000mm Pitch - GT -  50mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 50mm Wide on the Small Parts and Bearings website.


Belts - Timing - 8.000mm Pitch - GT - 85mm Wide
Belts - Timing -  8.000mm Pitch - GT -  85mm Wide

Also see combined categories:
All 8mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. GT3 replaces GT2 as GT2 stock is depleted. Pitch (P) - 8.000mm.

Related Information:

There is also a good range of Belts - Timing - 8.000mm Pitch - GT - 85mm Wide on the Small Parts and Bearings website.


Belts Timing H Pitch 12.7mm


Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide
Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide.

Related Information:

There is also a good range of Belts - Timing - 12.700mm Pitch - H - 19.1mm Wide on the Small Parts and Bearings website.


Belts - Timing - 12.700mm Pitch - H - 25.4mm Wide
Belts - Timing - 12.700mm Pitch - H - 25.4mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Timing - 12.700mm Pitch - H - 25.4mm Wide.

Related Information:

There is also a good range of Belts - Timing - 12.700mm Pitch - H - 25.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 12.700mm Pitch - H - 38.1mm Wide
Belts - Timing - 12.700mm Pitch - H - 38.1mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Timing - 12.700mm Pitch - H - 38.1mm Wide.

Related Information:

There is also a good range of Belts - Timing - 12.700mm Pitch - H - 38.1mm Wide on the Small Parts and Bearings website.


Belts - Timing - 12.700mm Pitch - H - 50.8mm Wide
Belts - Timing - 12.700mm Pitch - H - 50.8mm Wide

Also see combined categories:
All H 12.7mm Pitch Timing Belts

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. This category may be available in the new MBA online store at Belts - Timing - 12.700mm Pitch - H - 50.8mm Wide.

Related Information:

There is also a good range of Belts - Timing - 12.700mm Pitch - H - 50.8mm Wide on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 209769 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 209769 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.