International currencies? Visit the New MBA Store
Miniature Bearings Australia Pty Ltd

Belts Posi Drive Categories

Pulleys Timing AT10 10mm


Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium
Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium.

Related Information:
Belts to suit 10.000 Pitch AT Pulleys
Aluminium Flanges to suit AT10 series pulley stock
Steel Flanges to suit AT10 series pulley stock

There is also a good range of Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium on the Small Parts and Bearings website.

Pulleys Timing AT5 5mm


Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium
Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium.

Related Information:
Belts to suit 5.000 Pitch AT Pulleys
Aluminium Flanges to suit AT 5mm series pulley stock
Steel Flanges to suit AT 5mm series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium on the Small Parts and Bearings website.

Pulleys Timing GT2 2mm


Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium
Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium.

Related Information:
Belts to suit 2.000 Pitch GT Pulleys
Flanges to suit GT 2mm series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium on the Small Parts and Bearings website.

Pulleys Timing GT2 3mm


Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium
Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium.

Related Information:
Belts to suit 3.000 Pitch GT Pulleys
Flanges to suit GT 3mm series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium on the Small Parts and Bearings website.

Pulleys Timing GT2 5mm


Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium
Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium.

Related Information:
Belts to suit 5.000 Pitch GT Pulleys
Aluminium Flanges to suit GT 5mm series pulley stock
Steel Flanges to suit GT2 5mm series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium on the Small Parts and Bearings website.

Pulleys Timing H Pitch 12.7mm


Pulleys - Timing Stock 12.700mm Pitch H - Aluminium
Pulleys - Timing Stock 12.700mm Pitch H - Aluminium

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 12.700mm Pitch H - Aluminium.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Flanges to suit H series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 12.700mm Pitch H - Aluminium on the Small Parts and Bearings website.

Pulleys Timing HTD 3mm


Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium.

Related Information:
Belts to suit 3.000 Pitch HTD Pulleys
Flanges to suit HTD 3mm series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.

Pulleys Timing HTD 5mm


Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium.

Related Information:
Belts to suit 5.000 Pitch HTD Pulleys
Aluminium Flanges to suit HTD 5mm series pulley stock
Steel Flanges to suit HTD 5mm series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.

Pulleys Timing HTD 8mm


Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium.

Related Information:
Belts to suit 8.000 Pitch HTD Pulleys
Steel Flanges to suit HTD 8mm series pulley stock
Aluminium Flanges to suit HTD 8mm series pulley stock

There is also a good range of Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.

Pulleys Timing L Pitch 9.53mm


Pulleys - Timing Stock 9.525mm Pitch L - Aluminium
Pulleys - Timing Stock 9.525mm Pitch L - Aluminium

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 9.525mm Pitch L - Aluminium.

Related Information:
Belts to suit 9.525 Pitch L Pulleys
Aluminium Flanges to suit L series pulley stock
Steel Flanges to suit L series pulley stock

There is also a good range of Pulleys - Timing Stock 9.525mm Pitch L - Aluminium on the Small Parts and Bearings website.

Pulleys Timing MXL Pitch


Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium
Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium.

Related Information:
Belts to suit 2.032 Pitch MXL Pulleys - 8mm wide
Flanges to suit MXL series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium on the Small Parts and Bearings website.

Pulleys Timing T10 10mm


Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium
Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium.

Related Information:
Belts to suit 10.000 Pitch T Pulleys
Aluminium Flanges to suit T10 series pulley stock
Steel Flanges to suit T10 series pulley stock

There is also a good range of Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium on the Small Parts and Bearings website.

Pulleys Timing T2.5 2.5mm


Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium
Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium.

Related Information:
Belts to suit 2.500 Pitch T Pulleys
Flanges to suit T2.5 series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium on the Small Parts and Bearings website.

Pulleys Timing T5 5mm


Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium
Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium.

Related Information:
Belts to suit 5.000 Pitch T Pulleys
Steel Flanges to suit T5 series pulley stock
Aluminium Flanges to suit T5 series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium on the Small Parts and Bearings website.

Pulleys Timing 40DP LT Pitch


Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium
Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

This category may be available in the new MBA online store at Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium.

Related Information:
Belts to suit 2.073 Pitch 40DP Pulleys
Flanges to suit 40 DP series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium on the Small Parts and Bearings website.

Pulleys Timing GT2 2mm


Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless
Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless.

Related Information:
Belts to suit 2.000 Pitch GT Pulleys
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless on the Small Parts and Bearings website.

Pulleys Timing GT2 5mm


Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel
Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel.

Related Information:
Belts to suit 5.000 Pitch GT Pulleys
Aluminium Flanges to suit GT 5mm series pulley stock
Steel Flanges to suit GT2 5mm series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel on the Small Parts and Bearings website.

Pulleys Timing H Pitch 12.7mm


Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel
Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel.

Related Information:
Belts to suit 12.700 Pitch H Pulleys
Flanges to suit H series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel on the Small Parts and Bearings website.

Pulleys Timing HTD 3mm


Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel.

Related Information:
Belts to suit 3.000 Pitch HTD Pulleys
Flanges to suit HTD 3mm series pulley stock
Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.

Pulleys Timing HTD 5mm


Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel.

Related Information:
Belts to suit 5.000 Pitch HTD Pulleys
Aluminium Flanges to suit HTD 5mm series pulley stock
Steel Flanges to suit HTD 5mm series pulley stock

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.

Pulleys Timing HTD 8mm


Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel.

Related Information:
Belts to suit 8.000 Pitch HTD Pulleys
Steel Flanges to suit HTD 8mm series pulley stock
Aluminium Flanges to suit HTD 8mm series pulley stock

There is also a good range of Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.

Pulleys Timing L Pitch 9.53mm


Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel
Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel.

Related Information:
Belts to suit 9.525 Pitch L Pulleys
Aluminium Flanges to suit L series pulley stock
Steel Flanges to suit L series pulley stock

There is also a good range of Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel on the Small Parts and Bearings website.

Pulleys Timing XL Pitch 5.08mm


Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium
Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium.

Related Information:
Belts to suit 5.080 Pitch XL Pulleys
Steel Flanges to suit XL series pulley stock
Aluminium Flanges to suit XL series pulley stock

There is also a good range of Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium on the Small Parts and Bearings website.

Belts Posi-Drive


Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Pulleys.

Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined. This category may be available in the new MBA online store at Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core.

Related Information:
4.0mm Posi Drive Pulleys

There is also a good range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core on the Small Parts and Bearings website.

Pulleys Timing XL Pitch 5.08mm


Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel
Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel.

Related Information:
Belts to suit 5.080 Pitch XL Pulleys
Steel Flanges to suit XL series pulley stock
Aluminium Flanges to suit XL series pulley stock

There is also a good range of Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel on the Small Parts and Bearings website.

Belts Poly Vee


Belts - Poly V - J Section
Belts - Poly V - J Section


Belts include a tensile cord, most suited for industrial or adjustable applications

Poly Vee are ideal for high ratio and high speed drives. J Section polyvee is 2.34mm pitch and 3.56mm belt height. Note, this series is not a strechable type of belt. The belt width wll be determined by the number of ribs x the pitch. This category may be available in the new MBA online store at Belts - Poly V - J Section.

Related Information:
Poly Vee Pulleys to Suit J Section Belts - Through Bore
Poly Vee Pulleys to Suit J Section Belts - QD Bush Type
Poly Vee Belts and Bushes PDF Catalogue

There is also a good range of Belts - Poly V - J Section on the Small Parts and Bearings website.

You may also be interested in

RC Spare Parts


RC Spare Parts - Venom
RC Spare Parts - Venom


Venom Hobby Parts listed by description. Parts for 1/10 crawler, Baja, 1/8 scale cars, Beacon, Corsair, CPR Creeper, D Micro, DXL, EKOS, EPO, GPV-1, MINIZ, Island Hopper, King, Segad, KOS, KWA, M05, ME-109, MTT, Night Ranger 3D, Outlaw RC, Ozone Heli

Parts also to suit P-51, Texan, Savage, Scorpion AX10, Skywolf 3CH, Strait Jacket, TraXXas, TRX Slash. Ailerons fittings, Anti-rotation arm, A arms, Axle, Bag, Ball end, batteries assembleys, battery(bags, bars, box, case, charger, holder), beadlock, bearing kits, retainers and set. bell crank, blade grips and sets, body posts, bolt, bracket, bulkhead, cables, camber gauge, canopy, caps, carburettor, charger, chassis covers and plates. Cockpit cover, Collars, connectors, control links, control links, tray and units, coupler, cowl, crankcase, crankshaft, cylinder, Damper, decal set, differential (case, housing and system). Dig unit, drive (belt and dog), driveline, electronics unit, elevator, e-ring, ESC, exhaust (coupler, deflector and pipe), fail safes, feathering spindle.

Pulleys Poly Vee


Pulleys - Poly V - J Section - Through Bored
Pulleys - Poly V - J Section - Through Bored


Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height. This category may be available in the new MBA online store at Pulleys - Poly V - J Section - Through Bored.

Related Information:
Poly Vee Belts to Suit J Section Pulleys
Poly Vee Pulleys with QD Bush Bore
Poly Vee Belts and Bushes PDF Catalogue

There is also a good range of Pulleys - Poly V - J Section - Through Bored on the Small Parts and Bearings website.

Rollers


Rollers - Drive
Rollers - Drive

Also see combined categories:
All Rollers

Neoprene 60 durometer black ground outside diameter drive rollers

This category may be available in the new MBA online store at Rollers - Drive.

There is also a good range of Rollers - Drive on the Small Parts and Bearings website.

Tensioners


Tensioner - Drive - Adjustable Angle
Tensioner - Drive - Adjustable Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.

Idler shaft and pulleys not included with tensioner. This category may be available in the new MBA online store at Tensioner - Drive - Adjustable Angle.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Drive - Adjustable Angle on the Small Parts and Bearings website.

Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened. This category may be available in the new MBA online store at Tensioner - Drive - Adjustable Flanged.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Drive - Adjustable Flanged on the Small Parts and Bearings website.

Positioning


Positioning Stages
Positioning Stages


Used for Gauging and Positioning Light to Medium Loads. Ball slide and crossed roller types available.

Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish. This category may be available in the new MBA online store at Positioning Stages.

There is also a good range of Positioning Stages on the Small Parts and Bearings website.

Pins Dowel


Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:
Master Pins Catalogue PDF

There is also a good range of Pins - Hammer Drive - Flat Head on the Small Parts and Bearings website.

Pins - Hammer Drive - Round Head Stainless Steel
Pins - Hammer Drive - Round Head Stainless Steel

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:
Master Pins Catalogue PDF

There is also a good range of Pins - Hammer Drive - Round Head Stainless Steel on the Small Parts and Bearings website.

Plungers Spring


Plungers - Spring - Hex Drive Handle - Locking - Steel
Plungers - Spring - Hex Drive Handle - Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Hex Drive Handle - Locking - Steel.

There is also a good range of Plungers - Spring - Hex Drive Handle - Locking - Steel on the Small Parts and Bearings website.

Thread Inserts


Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

This category may be available in the new MBA online store at Tools - Thread Insert - Power Drive - EZ-Lok.

There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.

Pulleys Poly Vee


Pulleys - Poly V - J Section - QD Bush
Pulleys - Poly V - J Section - QD Bush


Use with QD bush to suit your bore requirement

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height. This category may be available in the new MBA online store at Pulleys - Poly V - J Section - QD Bush.

Related Information:
Poly Vee Belts to Suit J Section Pulleys
Poly Vee Pulleys with Through Bore
Poly Vee Belts and Bushes PDF Catalogue

There is also a good range of Pulleys - Poly V - J Section - QD Bush on the Small Parts and Bearings website.

Thread Inserts


Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Hex Drive - Flanged.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Flanged on the Small Parts and Bearings website.

Inserts - Self Tapping - For Wood - Hex Drive - Standard
Inserts - Self Tapping - For Wood - Hex Drive - Standard

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Hex Drive - Standard.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Standard on the Small Parts and Bearings website.

Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into pre-formed or pre-drilled holes and cut their own threads. Perfect for permanent installations.

Made from brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Slotted Drive - Short.

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Short on the Small Parts and Bearings website.

Inserts - Self Tapping - For Wood - Slotted Drive - Standard
Inserts - Self Tapping - For Wood - Slotted Drive - Standard

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:
Installation Tools

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Standard on the Small Parts and Bearings website.

Screws Countersunk


Screws - Countersunk - Titanium CP Grade 1 - Philips Drive
Screws - Countersunk - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Screws - Countersunk - Titanium CP Grade 1 - Philips Drive.

Related Information:
Nuts

There is also a good range of Screws - Countersunk - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.

Screws - Countersunk - Titanium CP Grade 2 - Philips Drive
Screws - Countersunk - Titanium CP Grade 2 - Philips Drive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only. CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance. This category may be available in the new MBA online store at Screws - Countersunk - Titanium CP Grade 2 - Philips Drive.

Related Information:
Nuts

There is also a good range of Screws - Countersunk - Titanium CP Grade 2 - Philips Drive on the Small Parts and Bearings website.

Screws Pan Head


Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Screws - Pan Head - Titanium CP Grade 1 - Philips Drive.

Related Information:
Nuts

There is also a good range of Screws - Pan Head - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.

Screws Grub


Slotted Set Screws - Partial Thread
Slotted Set Screws - Partial Thread

Also see combined categories:
All Special Hard Tip Grub Screws
All Dog Point Grub Screws

Partially threaded metric slotted drive set screws - grub screws

This category may be available in the new MBA online store at Slotted Set Screws - Partial Thread.

Related Information:
Socket Set Screws Master PDF

There is also a good range of Slotted Set Screws - Partial Thread on the Small Parts and Bearings website.

Gear Blanks


Gears - Blanks
Gears - Blanks


Blanks for cutting gears and pulleys and friction drives.

This category may be available in the new MBA online store at Gears - Blanks.

There is also a good range of Gears - Blanks on the Small Parts and Bearings website.

Belts Rounthane


Belts - Round - Urethane - Seamless
Belts - Round - Urethane - Seamless


Seamless round belting. Yellow colour. Temperature range -31 to 70 Deg C (-25 to 158 Deg F).

Working Load is 8 Percent of Tensile Strength. Use with grooved idler pulleys with diameters at least 8 times the belt width. This category may be available in the new MBA online store at Belts - Round - Urethane - Seamless.

Related Information:
U Groove Pulleys

There is also a good range of Belts - Round - Urethane - Seamless on the Small Parts and Bearings website.

Vee Belts


Belts - Vee - 10.0 x 5.5mm - M-3L
Belts - Vee - 10.0 x 5.5mm - M-3L

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:
Vee Pulleys - Idler
Vee Pulleys - M / 3L Section - Aluminium
Vee Pulleys - M / 3L Section - Cast Iron

There is also a good range of Belts - Vee - 10.0 x 5.5mm - M-3L on the Small Parts and Bearings website.

Belts - Vee - 12.5 x 9.0mm - A-4L
Belts - Vee - 12.5 x 9.0mm - A-4L

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.5mm Top Width x 9.0mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:
Vee Pulleys - A / 4L Section - Aluminium
Vee Pulleys - A / 4L Section - Cast Iron
Vee Pulleys - Idler

There is also a good range of Belts - Vee - 12.5 x 9.0mm - A-4L on the Small Parts and Bearings website.

Belts - Vee - 12.7 x 7.9mm - Notched AX
Belts - Vee - 12.7 x 7.9mm - Notched AX

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 7.9mm Height.

This category may be available in the new MBA online store at Belts - Vee - 12.7 x 7.9mm - Notched AX.

Related Information:
Vee Pulleys - Idler

There is also a good range of Belts - Vee - 12.7 x 7.9mm - Notched AX on the Small Parts and Bearings website.




Main Pages

5 Axis Machine Tool Bearings

5 Axis Machine Tool Bearings
 About Us

About Us
 Acetal Bearings PDF

Acetal Bearings PDF
 ADR and SKF PDF

ADR and SKF PDF
 Anderton Circlips Cross Reference PDF

Anderton Circlips Cross Reference PDF
 Ball Lock Pins PDF

Ball Lock Pins PDF
 Balls List

Balls List
 Balls PDF

Balls PDF
 Barden Bearings Cross Reference PDF

Barden Bearings Cross Reference PDF
 Bearings List

Bearings List
 Brands

Brands
 Ceramic Bearings PDF

Ceramic Bearings PDF
 Circlips PDF

Circlips PDF
 Clearance Items List

Clearance Items List
 Clevis Pins PDF

Clevis Pins PDF
 Contact Us

Contact Us
 Corrosion Resistant Bearings PDF

Corrosion Resistant Bearings PDF
 Dental Bearings

Dental Bearings
 Disc Springs PDF

Disc Springs PDF
 Distributor Locations

Distributor Locations
 Dowel Pins PDF

Dowel Pins PDF
 Dowel Pins

Dowel Pins
 Economy Bearings PDF

Economy Bearings PDF
 Essentra Cross Reference PDF

Essentra Cross Reference PDF
 Flocast Cross Reference PDF

Flocast Cross Reference PDF
 Freight Rates and Shipping Times

Freight Rates and Shipping Times
 Frequently Asked Questions

Frequently Asked Questions
 General Information about MBA

General Information about MBA
 Hammer Drive Pins PDF

Hammer Drive Pins PDF
 High Speed Bearings PDF

High Speed Bearings PDF
 Hobby Clearance

Hobby Clearance
 Hobby Information

Hobby Information
 K&S Metals Cross Reference PDF

K&S Metals Cross Reference PDF
 Key Steel PDF

Key Steel PDF
 Knobs PDF

Knobs PDF
 Large Bearings

Large Bearings
 Leveling Mounts PDF

Leveling Mounts PDF
 Mailorder Form

Mailorder Form
 Metallic Bushes PDF

Metallic Bushes PDF
 Miniature Precison Bearings Cross Reference PDF

Miniature Precison Bearings Cross Reference PDF
 Miscellaneous Brands Cross Reference PDF

Miscellaneous Brands Cross Reference PDF
 Nordex Cross Reference PDF

Nordex Cross Reference PDF
 NSK and NTN Cross Reference PDF

NSK and NTN Cross Reference PDF
 Ondrives Cross Reference PDF

Ondrives Cross Reference PDF
 O-Rings PDF

O-Rings PDF
 Pins PDF

Pins PDF
 Plastic Bearings PDF

Plastic Bearings PDF
 Polyvee Belts and Pulleys PDF

Polyvee Belts and Pulleys PDF
 Precision Shim Washers PDF

Precision Shim Washers PDF
 Privacy

Privacy
 Push On and Push In Rings PDF

Push On and Push In Rings PDF
 Reid Supply Cross Reference PDF

Reid Supply Cross Reference PDF
 Rod & Tube PDF

Rod & Tube PDF
 Roll Pins PDF

Roll Pins PDF
 Satellite Reaction Wheels

Satellite Reaction Wheels
 Screws PDF

Screws PDF
 SDP-SI Designatronics Cross Reference PDF

SDP-SI Designatronics Cross Reference PDF
 Seeger Circlips Cross Reference PDF

Seeger Circlips Cross Reference PDF
 Shaft Collars PDF

Shaft Collars PDF
 Shim Sheet PDF

Shim Sheet PDF
 Shoulder Screws PDF

Shoulder Screws PDF
 Sintered Bronze Bushes PDF

Sintered Bronze Bushes PDF
 Sintered Bronze Cross Reference PDF

Sintered Bronze Cross Reference PDF
 Small Bearings

Small Bearings
 Small Parts Inc Cross Reference PDF

Small Parts Inc Cross Reference PDF
 Snap Rings PDF

Snap Rings PDF
 Socket Set Screws PDF

Socket Set Screws PDF
 Solid Bronze Bushes PDF

Solid Bronze Bushes PDF
 Spring Steel Strip PDF

Spring Steel Strip PDF
 Springs PDF

Springs PDF
 Standard Ball Bearing Range PDF

Standard Ball Bearing Range PDF
 Super Precision Bearings PDF

Super Precision Bearings PDF
 Taper Pins PDF

Taper Pins PDF
 Technical Information

Technical Information
 Terms

Terms
 Thrust Bearings PDF

Thrust Bearings PDF
 Thumb Screws and Nuts PDF

Thumb Screws and Nuts PDF
 Timing Belts and Pulleys Cross Reference PDF

Timing Belts and Pulleys Cross Reference PDF
 Timing Belts PDF

Timing Belts PDF
 Timing Pulley Stock PDF

Timing Pulley Stock PDF
 Timing Pulleys PDF

Timing Pulleys PDF
 Vibration Mounts PDF

Vibration Mounts PDF
 Washers and Spacers PDF

Washers and Spacers PDF
 Wave Washers PDF

Wave Washers PDF
 Domains

Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227673 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

 
5 Axis Machine Tool Bearings ADR and SKF PDF (Link) About Us Acetal Bearings PDF (Link) Anderton Circlips Cross Reference PDF (Link) Ball Lock Pins PDF (Link) Balls List
Paypal Accepted
Paypal
Secure Checkout
Balls PDF (Link) Barden Bearings Cross Reference PDF (Link) Bearings List Bearings and Balls Brands Ceramic Bearings PDF (Link) Circlips PDF (Link) Clamping and Locking
Visa Card Accepted
Visa
Secure Checkout
Clearance Items List Clevis Pins PDF (Link) Contact Us Control Products Corrosion Resistant Bearings PDF (Link) Dental Bearings Dental Disc Springs PDF (Link)
Master Card Accepted
Mastercard
Secure Checkout
Distributor Locations Domains Dowel Pins PDF (Link) Dowel Pins Economy Bearings PDF (Link) Essentra Cross Reference PDF (Link) Fasteners Flocast Cross Reference PDF (Link)
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Freight Rates and Shipping Times (Link) Frequently Asked Questions Games and Toys Gears General Information about MBA (Link) Hammer Drive Pins PDF (Link) High Speed Bearings PDF (Link) Hobby Clearance (Link)
Amex Accepted
Amex
Secure Checkout
Hobby Information K&S Metals Cross Reference PDF (Link) Key Steel PDF (Link) Kits Knobs PDF (Link) Large Bearings (Link) Leveling Mounts PDF (Link) Linear Bearings and Systems
Paypal Accepted
Paypal
Secure Checkout
Literature Lubricants Magnets Mailorder Form (Link) Materials Metallic Bushes PDF (Link) Miniature Precison Bearings Cross Reference PDF (Link) Miscellaneous Brands Cross Reference PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Miscellaneous Motors and Gearboxes NSK and NTN Cross Reference PDF (Link) Nordex Cross Reference PDF (Link) O-Rings PDF (Link) Ondrives Cross Reference PDF (Link) Packing and Display Pins PDF (Link)
Master Card Accepted
Mastercard
Secure Checkout
Plastic Bearings PDF (Link) Polyvee Belts and Pulleys PDF (Link) Power Transmission Precision Shim Washers PDF (Link) Privacy Push On and Push In Rings PDF (Link) Reid Supply Cross Reference PDF (Link) Rod & Tube PDF (Link)
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Roll Pins PDF (Link) SDP-SI Designatronics Cross Reference PDF (Link) Satellite Reaction Wheels Screws PDF (Link) Seals Seeger Circlips Cross Reference PDF (Link) Shaft Collars PDF (Link) Shaft Couplings
Amex Accepted
Amex
Secure Checkout
Shafting Shim Sheet PDF (Link) Shoulder Screws PDF (Link) Sintered Bronze Bushes PDF (Link) Sintered Bronze Cross Reference PDF (Link) Small Bearings (Link) Small Parts Inc Cross Reference PDF (Link) Snap Rings PDF (Link)
Paypal Accepted
Paypal
Secure Checkout
Socket Set Screws PDF (Link) Solid Bronze Bushes PDF (Link) Spring Steel Strip PDF (Link) Springs PDF (Link) Springs and Retraction Standard Ball Bearing Range PDF (Link) Storage Super Precision Bearings PDF (Link)
Visa Card Accepted
Visa
Secure Checkout
Taper Pins PDF (Link) Technical Information Terms Thrust Bearings PDF (Link) Thumb Screws and Nuts PDF (Link) Timing Belts PDF (Link) Timing Belts and Pulleys Cross Reference PDF (Link) Timing Belts and Pulleys
Master Card Accepted
Mastercard
Secure Checkout
Timing Pulley Stock PDF (Link) Timing Pulleys PDF (Link) Tools Vibration Control Vibration Mounts PDF (Link) Washers and Spacers PDF (Link) Wave Washers PDF (Link)

Products

Adjusters Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screw Accessories Ball Screws Ground
Paypal Accepted
Paypal
Secure Checkout
Ball Screws Nook Series Ball Screws Rolled Ball Splines Linear Ball Transfers Balls Ceramic Balls Metallic Balls Plastic Balls Rubber Bar and Rod Batteries
Visa Card Accepted
Visa
Secure Checkout
Bearings Angular Contact Bearings Automotive Bearings Ceramic Bearings Clutch Bearings Conveyor Bearings Cylindrical Roller Bearings Double Row Ball Bearings Flanged Ball Bearings Grooved Profile Bearings Housings
Master Card Accepted
Mastercard
Secure Checkout
Bearings Mounted Bearings Needle Roller Bearings One Way Clutch Bearings Pivot Bearings Plastic Bearings Plates Bearings Self Aligning Ball Bearings Single Row Ball Bearings Special Purpose Bearings Spherical Roller
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Bearings Stainless Special Grades Bearings Tapered Roller Bearings Thrust Bearings and Housings Insert Bearings for Dental Equipment Bearings for Housings Bearings for Skating Belts Poly Vee Belts Posi-Drive Belts Rounthane
Amex Accepted
Amex
Secure Checkout
Belts Timing 40DP LT Pitch Belts Timing AT10 10mm Belts Timing AT5 5mm Belts Timing GT2 -14mm Belts Timing GT2 2mm Belts Timing GT2 3mm Belts Timing GT2 5mm Belts Timing GT2 8mm Belts Timing H Pitch 12.7mm Belts Timing HTD -14mm
Paypal Accepted
Paypal
Secure Checkout
Belts Timing HTD 3mm Belts Timing HTD 5mm Belts Timing HTD 8mm Belts Timing L Pitch 9.53mm Belts Timing MXL Pitch Belts Timing S2M 2mm Belts Timing S3M 3mm Belts Timing S5M 5mm Belts Timing S8M 8mm Belts Timing T01 1mm
Visa Card Accepted
Visa
Secure Checkout
Belts Timing T015 1.5mm Belts Timing T10 10mm Belts Timing T2.5 2.5mm Belts Timing T5 5mm Belts Timing XL Pitch 5.08mm Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel
Master Card Accepted
Mastercard
Secure Checkout
Bushings Spherical Cable Ties Cable Cam Followers Castors Accessories Castors Plate Castors Stud Catalogues Catches Chain and Sprockets Ladder
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Chain and Sprockets Roller Channel Circlips Clamping Bushings Clamping Rings Clamps Clips Clutches Collars Couplings Geargrip
Amex Accepted
Amex
Secure Checkout
Couplings Helical and Slit Couplings Insert and Jaw Couplings K Type Couplings Other Couplings Rigid Cross Blocks Dampers Dual Vee Bearings Engineering and Hobby Rod Eyebolts
Paypal Accepted
Paypal
Secure Checkout
Fastening Bushings Flexible Shaft Gas Springs Gear Blanks Gear Racks Flexible Gearboxes Cross Axis Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open
Visa Card Accepted
Visa
Secure Checkout
Gears Cluster Gears Inch Bevel Gears Inch Mitre Gears Inch Racks Gears Inch Spur Gears Inch Worms Gears Metric Bevel Gears Metric Mitre Gears Metric Racks Gears Metric Spiral Mitre
Master Card Accepted
Mastercard
Secure Checkout
Gears Metric Spur Gears Metric Worms Gifts Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Shafting
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Hobby Wheels Hooks Housings for Ball Bearings Housings with Bearing Hubs Insulator Strips Insulators Isolators Keys and Keysteel Keys
Amex Accepted
Amex
Secure Checkout
Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Pointer Knobs Push Pull
Paypal Accepted
Paypal
Secure Checkout
Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Handle Latches Other Latches Paddle
Visa Card Accepted
Visa
Secure Checkout
Latches Quarter Turn Lazy Susans Leads and Connectors Leadscrews Levers Linear Bearing Housings Linear Bearings with Housing Linear Bearings Linear Slides Locking Assemblies
Master Card Accepted
Mastercard
Secure Checkout
Locking Bushings Lubricants General Purpose Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Magnets Rubber and Vinyl Motors DC Motors Stepper
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Motors Vibrating Mounts Base Mounts Bonded Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular
Amex Accepted
Amex
Secure Checkout
Mounts Wedge Nuts Dome Nuts Hex Nuts Lock for Bearings Nuts Lock Nuts Specialty Nuts Thumb Nuts Wing O-Rings for Dental Applications O-Rings
Paypal Accepted
Paypal
Secure Checkout
Oil Seals Pillars Pinion Wire Imperial Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Locating Pins Pull
Visa Card Accepted
Visa
Secure Checkout
Pins Roll Pins Taper Pins Wirelock Plugs Plungers Ball Plungers Indexing Plungers Spring Positioning Pressure Rollers Protective Packing and Sleeves
Master Card Accepted
Mastercard
Secure Checkout
Pulleys Flanges Pulleys Grooved Pulleys Idler Pulleys Poly Vee Pulleys Timing 40DP LT Pitch Pulleys Timing AT10 10mm Pulleys Timing AT5 5mm Pulleys Timing GT2 -14mm Pulleys Timing GT2 2mm Pulleys Timing GT2 3mm
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Pulleys Timing GT2 5mm Pulleys Timing GT2 8mm Pulleys Timing H Pitch 12.7mm Pulleys Timing HTD 3mm Pulleys Timing HTD 5mm Pulleys Timing HTD 8mm Pulleys Timing L Pitch 9.53mm Pulleys Timing MXL Pitch Pulleys Timing T01 1mm Pulleys Timing T10 10mm
Amex Accepted
Amex
Secure Checkout
Pulleys Timing T2.5 2.5mm Pulleys Timing T5 5mm Pulleys Timing XL Pitch 5.08mm Pulleys Vee RC Car and Buggy Wheels RC Propellers and Adaptors RC Spare Parts Ratchets and Pawls Robotic Wheels Rod Ends PTFE Lined
Paypal Accepted
Paypal
Secure Checkout
Rod Ends Plastic Rod Ends Stainless Steel Rod Ends Stamped Rod Ends Standard Rod Ends Studded Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head
Visa Card Accepted
Visa
Secure Checkout
Screws Coach Screws Countersunk Screws Grub Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping
Master Card Accepted
Mastercard
Secure Checkout
Screws Shoulder Screws Square Head Screws Thumb Screws Wood Seals and Sealing Sets Shaft Extenders and Reducers Shafting Aluminium Shafting General Purpose Shafting Precision Ground
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
Shaftloc Shim Shock Absorbers Sleeves Snap Buttons Snaps Spacers Spare Part Boxes Spring Anchors Spring Motors
Amex Accepted
Amex
Secure Checkout
Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant Force Springs Die Springs Disc Springs Extension Springs General Springs Torsion
Paypal Accepted
Paypal
Secure Checkout
Spur Gear Stock Inch Square Shaft Stays Stops Spring Strip Stroke Rotary Bushings Studs Suction Cups Switches Tape
Visa Card Accepted
Visa
Secure Checkout
Tee Joints Tension Bushings Tensioners Thread Inserts Timing Belt Lengths Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits
Master Card Accepted
Mastercard
Secure Checkout
Tools Circlip Tools Cutting Tools Deburring Tools General Tools Pullers Tools Screw Extractors Tools Threading Tube and Tubing Turntables Universal Joints Single
Pay By
Phone after Checkout
Payment phone number will be shown on your pro-forma invoice.
V-Rings Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking
Amex Accepted
Amex
Secure Checkout
Washers Serrated Locking Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wheels RC Plane Wrenches Yoke Ends

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227673 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.