Miniature Bearings Australia Pty Ltd

Belts Posi Drive Categories


Pulleys Timing AT10 10mm


Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium
Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 10.000mm Pitch AT10 - Aluminium on the Small Parts and Bearings website.


Pulleys Timing AT5 5mm


Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium
Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch AT5 - Aluminium on the Small Parts and Bearings website.


Pulleys Timing GT2 2mm


Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium
Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 2.000mm Pitch GT - Aluminium on the Small Parts and Bearings website.


Pulleys Timing GT2 3mm


Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium
Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch GT - Aluminium on the Small Parts and Bearings website.


Pulleys Timing GT2 5mm


Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium
Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch GT - Aluminium on the Small Parts and Bearings website.


Pulleys Timing H Pitch 12.7mm


Pulleys - Timing Stock 12.700mm Pitch H - Aluminium
Pulleys - Timing Stock 12.700mm Pitch H - Aluminium

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 12.700mm Pitch H - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 12.700mm Pitch H - Aluminium on the Small Parts and Bearings website.


Pulleys Timing HTD 3mm


Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.


Pulleys Timing HTD 5mm


Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.


Pulleys Timing HTD 8mm


Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium
Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 8.000mm Pitch HTD - Aluminium on the Small Parts and Bearings website.


Pulleys Timing L Pitch 9.53mm


Pulleys - Timing Stock 9.525mm Pitch L - Aluminium
Pulleys - Timing Stock 9.525mm Pitch L - Aluminium

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 9.525mm Pitch L - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 9.525mm Pitch L - Aluminium on the Small Parts and Bearings website.


Pulleys Timing MXL Pitch


Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium
Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 2.032mm Pitch MXL - Aluminium on the Small Parts and Bearings website.


Pulleys Timing T10 10mm


Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium
Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 10.000mm Pitch T10 - Aluminium on the Small Parts and Bearings website.


Pulleys Timing T2.5 2.5mm


Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium
Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 2.500mm Pitch T2.5 - Aluminium on the Small Parts and Bearings website.


Pulleys Timing T5 5mm


Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium
Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch T5 - Aluminium on the Small Parts and Bearings website.


Pulleys Timing 40DP LT Pitch


Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium
Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

This category may be available in the new MBA online store at Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 2.073mm Pitch 40DP - Aluminium on the Small Parts and Bearings website.


Pulleys Timing GT2 2mm


Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless
Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless.

Related Information:

There is also a good range of Pulleys - Timing Stock 2.000mm Pitch GT - 304 Stainless on the Small Parts and Bearings website.


Pulleys Timing GT2 5mm


Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel
Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch GT - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing H Pitch 12.7mm


Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel
Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 12.700mm Pitch H - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing HTD 3mm


Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 3.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing HTD 5mm


Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing HTD 8mm


Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel
Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 8.000mm Pitch HTD - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing L Pitch 9.53mm


Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel
Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 9.525mm Pitch L - Carbon Steel on the Small Parts and Bearings website.


Pulleys Timing XL Pitch 5.08mm


Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium
Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.080mm Pitch XL - Aluminium on the Small Parts and Bearings website.


Belts Posi-Drive


Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Pulleys.

Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined. This category may be available in the new MBA online store at Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core.

Related Information:

There is also a good range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core on the Small Parts and Bearings website.


Pulleys Timing XL Pitch 5.08mm


Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel
Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing Stock 5.080mm Pitch XL - Carbon Steel on the Small Parts and Bearings website.


Belts Poly Vee


Belts - Poly V - J Section
Belts - Poly V - J Section


Belts include a tensile cord, most suited for industrial or adjustable applications

Poly Vee are ideal for high ratio and high speed drives. J Section polyvee is 2.34mm pitch and 3.56mm belt height. Note, this series is not a strechable type of belt. The belt width wll be determined by the number of ribs x the pitch. This category may be available in the new MBA online store at Belts - Poly V - J Section.

Related Information:

There is also a good range of Belts - Poly V - J Section on the Small Parts and Bearings website.


You may also be interested in

RC Spare Parts


RC Spare Parts - Venom
RC Spare Parts - Venom


Venom Hobby Parts listed by description. Parts for 1/10 crawler, Baja, 1/8 scale cars, Beacon, Corsair, CPR Creeper, D Micro, DXL, EKOS, EPO, GPV-1, MINIZ, Island Hopper, King, Segad, KOS, KWA, M05, ME-109, MTT, Night Ranger 3D, Outlaw RC, Ozone Heli

Parts also to suit P-51, Texan, Savage, Scorpion AX10, Skywolf 3CH, Strait Jacket, TraXXas, TRX Slash. Ailerons fittings, Anti-rotation arm, A arms, Axle, Bag, Ball end, batteries assembleys, battery(bags, bars, box, case, charger, holder), beadlock, bearing kits, retainers and set. bell crank, blade grips and sets, body posts, bolt, bracket, bulkhead, cables, camber gauge, canopy, caps, carburettor, charger, chassis covers and plates. Cockpit cover, Collars, connectors, control links, control links, tray and units, coupler, cowl, crankcase, crankshaft, cylinder, Damper, decal set, differential (case, housing and system). Dig unit, drive (belt and dog), driveline, electronics unit, elevator, e-ring, ESC, exhaust (coupler, deflector and pipe), fail safes, feathering spindle.


Pulleys Poly Vee


Pulleys - Poly V - J Section - Through Bored
Pulleys - Poly V - J Section - Through Bored


Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height. This category may be available in the new MBA online store at Pulleys - Poly V - J Section - Through Bored.

Related Information:

There is also a good range of Pulleys - Poly V - J Section - Through Bored on the Small Parts and Bearings website.


Rollers


Rollers - Drive
Rollers - Drive

Also see combined categories:
All Rollers

Neoprene 60 durometer black ground outside diameter drive rollers

This category may be available in the new MBA online store at Rollers - Drive.

There is also a good range of Rollers - Drive on the Small Parts and Bearings website.


Tensioners


Tensioner - Drive - Adjustable Angle
Tensioner - Drive - Adjustable Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.

Idler shaft and pulleys not included with tensioner. This category may be available in the new MBA online store at Tensioner - Drive - Adjustable Angle.

Related Information:

There is also a good range of Tensioner - Drive - Adjustable Angle on the Small Parts and Bearings website.


Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened. This category may be available in the new MBA online store at Tensioner - Drive - Adjustable Flanged.

Related Information:

There is also a good range of Tensioner - Drive - Adjustable Flanged on the Small Parts and Bearings website.


Positioning


Positioning Stages
Positioning Stages


Used for Gauging and Positioning Light to Medium Loads. Ball slide and crossed roller types available.

Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish. This category may be available in the new MBA online store at Positioning Stages.

There is also a good range of Positioning Stages on the Small Parts and Bearings website.


Pins Dowel


Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:

There is also a good range of Pins - Hammer Drive - Flat Head on the Small Parts and Bearings website.


Pins - Hammer Drive - Round Head Stainless Steel
Pins - Hammer Drive - Round Head Stainless Steel

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:

There is also a good range of Pins - Hammer Drive - Round Head Stainless Steel on the Small Parts and Bearings website.


Plungers Spring


Plungers - Spring - Hex Drive Handle - Locking - Steel
Plungers - Spring - Hex Drive Handle - Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Hex Drive Handle - Locking - Steel.

There is also a good range of Plungers - Spring - Hex Drive Handle - Locking - Steel on the Small Parts and Bearings website.


Thread Inserts


Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

This category may be available in the new MBA online store at Tools - Thread Insert - Power Drive - EZ-Lok.

There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.


Pulleys Poly Vee


Pulleys - Poly V - J Section - QD Bush
Pulleys - Poly V - J Section - QD Bush


Use with QD bush to suit your bore requirement

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height. This category may be available in the new MBA online store at Pulleys - Poly V - J Section - QD Bush.

Related Information:

There is also a good range of Pulleys - Poly V - J Section - QD Bush on the Small Parts and Bearings website.


Thread Inserts


Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Hex Drive - Flanged.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Flanged on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Hex Drive - Standard
Inserts - Self Tapping - For Wood - Hex Drive - Standard

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Hex Drive - Standard.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Standard on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into pre-formed or pre-drilled holes and cut their own threads. Perfect for permanent installations.

Made from brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Slotted Drive - Short.

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Short on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Slotted Drive - Standard
Inserts - Self Tapping - For Wood - Slotted Drive - Standard

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Standard on the Small Parts and Bearings website.


Screws Countersunk


Screws - Countersunk - Titanium CP Grade 1 - Philips Drive
Screws - Countersunk - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Screws - Countersunk - Titanium CP Grade 1 - Philips Drive.

Related Information:

There is also a good range of Screws - Countersunk - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.


Screws - Countersunk - Titanium CP Grade 2 - Philips Drive
Screws - Countersunk - Titanium CP Grade 2 - Philips Drive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only. CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance. This category may be available in the new MBA online store at Screws - Countersunk - Titanium CP Grade 2 - Philips Drive.

Related Information:

There is also a good range of Screws - Countersunk - Titanium CP Grade 2 - Philips Drive on the Small Parts and Bearings website.


Screws Pan Head


Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Screws - Pan Head - Titanium CP Grade 1 - Philips Drive.

Related Information:

There is also a good range of Screws - Pan Head - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.


Screws Grub


Slotted Set Screws - Partial Thread
Slotted Set Screws - Partial Thread

Also see combined categories:
All Special Hard Tip Grub Screws
All Dog Point Grub Screws

Partially threaded metric slotted drive set screws - grub screws

This category may be available in the new MBA online store at Slotted Set Screws - Partial Thread.

Related Information:

There is also a good range of Slotted Set Screws - Partial Thread on the Small Parts and Bearings website.


Gear Blanks


Gears - Blanks
Gears - Blanks


Blanks for cutting gears and pulleys and friction drives.

This category may be available in the new MBA online store at Gears - Blanks.

There is also a good range of Gears - Blanks on the Small Parts and Bearings website.


Belts Rounthane


Belts - Round - Urethane - Seamless
Belts - Round - Urethane - Seamless


Seamless round belting. Yellow colour. Temperature range -31 to 70 Deg C (-25 to 158 Deg F).

Working Load is 8 Percent of Tensile Strength. Use with grooved idler pulleys with diameters at least 8 times the belt width. This category may be available in the new MBA online store at Belts - Round - Urethane - Seamless.

Related Information:

There is also a good range of Belts - Round - Urethane - Seamless on the Small Parts and Bearings website.


Vee Belts


Belts - Vee - 10.0 x 5.5mm - M-3L
Belts - Vee - 10.0 x 5.5mm - M-3L

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

There is also a good range of Belts - Vee - 10.0 x 5.5mm - M-3L on the Small Parts and Bearings website.


Belts - Vee - 12.5 x 9.0mm - A-4L
Belts - Vee - 12.5 x 9.0mm - A-4L

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.5mm Top Width x 9.0mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

There is also a good range of Belts - Vee - 12.5 x 9.0mm - A-4L on the Small Parts and Bearings website.


Belts - Vee - 12.7 x 7.9mm - Notched AX
Belts - Vee - 12.7 x 7.9mm - Notched AX

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 7.9mm Height.

This category may be available in the new MBA online store at Belts - Vee - 12.7 x 7.9mm - Notched AX.

Related Information:

There is also a good range of Belts - Vee - 12.7 x 7.9mm - Notched AX on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.