Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Bearings Thrust Roller Washers Categories
Bearings Thrust
Bearings - Thrust - Roller - Washers
Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.
Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.
Related Information:
A larger range of Bearings - Thrust - Roller - Washers might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Roller - Washers on the Small Parts and Bearings website.
Bearings - Thrust - Roller - Cage and Rollers Only
Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.
Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.
Related Information:
A larger range of Bearings - Thrust - Roller - Cage and Rollers Only might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Roller - Cage and Rollers Only on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Washers Only - Chrome Steel
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Carbon Steel Washers are hardened to RC59.61.
Related Information:
A larger range of Bearings - Thrust - Ball - Washers Only - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Washers Only - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Washers Only - Stainless Steel
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Stainless Steel Washers are hardened to HRC38.42.
Related Information:
A larger range of Bearings - Thrust - Ball - Washers Only - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Small Parts and Bearings website.
Washers - Self Aligning - Sets - Plastic
Spherical Seat Washers
Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.
Related Information:
A larger range of Washers - Self Aligning - Sets - Plastic might be available on the Bearing Shop Online site. There is also a good range of Washers - Self Aligning - Sets - Plastic on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Chrome Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Flat - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Stainless Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Flat - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Small Parts and Bearings website.
You may also be interested in
Rollers
Rollers - Solid - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.
A larger range of Rollers - Solid - Stud Mount - Black Neoprene might be available on the Bearing Shop Online site. There is also a good range of Rollers - Solid - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Solid - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.
A larger range of Rollers - Solid - Stud Mount - Coloured Urethane might be available on the Bearing Shop Online site. There is also a good range of Rollers - Solid - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Bearings Thrust
Bearings - Thrust - Ball - Banded
3 Piece Thrust Bearings Banded Type
Related Information:
A larger range of Bearings - Thrust - Ball - Banded might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Banded on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Chrome Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Grooved - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic
3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics.
Related Information:
A larger range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - Si3N4 Ceramic on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Stainless Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Grooved - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.
Rollers
Rollers - Bearing - Nylon Covered
Nylon tyred rollers for heavy duty applications
Nylon tyre (tire) covering a precision deep groove radial ball bearings.
Related Information:
A larger range of Rollers - Bearing - Nylon Covered might be available on the Bearing Shop Online site. There is also a good range of Rollers - Bearing - Nylon Covered on the Small Parts and Bearings website.
Bearings Needle Roller
Bearings - Needle Roller - Cage Type
Cage and Rollers.
Related Information:
A larger range of Bearings - Needle Roller - Cage Type might be available on the Bearing Shop Online site. There is also a good range of Bearings - Needle Roller - Cage Type on the Small Parts and Bearings website.
Bearings - Needle Roller - Inner Rings
Hardened sleeves for needle roller bearings.
Related Information:
A larger range of Bearings - Needle Roller - Inner Rings might be available on the Bearing Shop Online site. There is also a good range of Bearings - Needle Roller - Inner Rings on the Small Parts and Bearings website.
Bearings - Needle Roller - Machined - With Inner Ring
Related Information:
A larger range of Bearings - Needle Roller - Machined - With Inner Ring might be available on the Bearing Shop Online site. There is also a good range of Bearings - Needle Roller - Machined - With Inner Ring on the Small Parts and Bearings website.
Bearings - Needle Roller - Machined - Without Inner Ring
Related Information:
A larger range of Bearings - Needle Roller - Machined - Without Inner Ring might be available on the Bearing Shop Online site. There is also a good range of Bearings - Needle Roller - Machined - Without Inner Ring on the Small Parts and Bearings website.
Bearings - Needle Roller - Shell Type - Closed End
Light Weight. Compact Design.
Related Information:
A larger range of Bearings - Needle Roller - Shell Type - Closed End might be available on the Bearing Shop Online site. There is also a good range of Bearings - Needle Roller - Shell Type - Closed End on the Small Parts and Bearings website.
Bearings - Needle Roller - Shell Type - Open Ends
Light Weight. Compact Design.
Related Information:
A larger range of Bearings - Needle Roller - Shell Type - Open Ends might be available on the Bearing Shop Online site. There is also a good range of Bearings - Needle Roller - Shell Type - Open Ends on the Small Parts and Bearings website.
Bearings Tapered Roller
Bearings - Tapered Roller - Cone
Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.
A larger range of Bearings - Tapered Roller - Cone might be available on the Bearing Shop Online site. There is also a good range of Bearings - Tapered Roller - Cone on the Small Parts and Bearings website.
Bearings - Tapered Roller - Cup
Replacements for existing tapered roller cups (outer part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.
A larger range of Bearings - Tapered Roller - Cup might be available on the Bearing Shop Online site. There is also a good range of Bearings - Tapered Roller - Cup on the Small Parts and Bearings website.
Pressure Rollers
Bearings - Pressure Roller - With Urethane OD
Bearings with Urethane Tyre on OD for applications requiring frictional movement.
For applications including paper and card dispensing and rolling (eg ATM Machines).
Related Information:
A larger range of Bearings - Pressure Roller - With Urethane OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Pressure Roller - With Urethane OD on the Small Parts and Bearings website.
Bearings Mounted
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.
Related Information:
A larger range of Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning might be available on the Bearing Shop Online site. There is also a good range of Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning on the Small Parts and Bearings website.
Bearings One Way Clutch
Bearings - One Way - Roller
Roller Clutch Bearings rotate in one direction only.
Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.
Related Information:
A larger range of Bearings - One Way - Roller might be available on the Bearing Shop Online site. There is also a good range of Bearings - One Way - Roller on the Small Parts and Bearings website.
Springs Disc
Washers - Disc Spring - Ball Bearing Type
Specially designed for preloading the outer ring of ball bearings. C1075 steel. Also known as belleville washers.
Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.
A larger range of Washers - Disc Spring - Ball Bearing Type might be available on the Bearing Shop Online site. There is also a good range of Washers - Disc Spring - Ball Bearing Type on the Small Parts and Bearings website.
Rollers
Rollers - Idler - With Plain Sintered Bearing
Related Information:
A larger range of Rollers - Idler - With Plain Sintered Bearing might be available on the Bearing Shop Online site. There is also a good range of Rollers - Idler - With Plain Sintered Bearing on the Small Parts and Bearings website.
Bearings Mounted
Bearings - Self Clinching - Self Aligning - Needle Roller
Spyraflo needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Bearings - Self Clinching - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Dental Handpiece Parts
Several Dental Washers Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
A larger range of Several Dental Washers Parts might be available on the Bearing Shop Online site. There is also a good range of Several Dental Washers Parts on the Small Parts and Bearings website.
Bearings Mounted
Housings - Flanged - Self Aligning - Needle Roller
Spyraflo robust light weight aluminium housing with self aligning needle roller bearings
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
A larger range of Housings - Flanged - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Flanged - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Linear Slides
Slides - Linear - Cross Roller Rail
Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.
Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.
There is also a good range of Slides - Linear - Cross Roller Rail on the Small Parts and Bearings website.
Bearings Mounted
Housings - Flange Mount - Non Aligning - Needle Roller
Low profile flange mounted needle roller bearings
See links at bottom of web page for more information.
Related Information:
A larger range of Housings - Flange Mount - Non Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Non Aligning - Needle Roller on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - Needle Roller
Low profile self aligning flange mounted needle roller bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Housings - Pillow Block - Self Aligning - Needle Roller
Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
Spyraflo robust light weight aluminium housing with self aligning needle roller bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
A larger range of Housings - Pillow Block - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Pillow Block - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Rollers
Rollers - Steel
Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings
Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings.
Related Information:
There is also a good range of Rollers - Steel on the Small Parts and Bearings website.
Washers Lock
Washers - Lock - Tabbed - Heavy Duty
Heavy duty WH / TW Series for bearing locknuts.
Carbon spring steel. Use with NH series locknuts. For use with bearing lock nuts.
There is also a good range of Washers - Lock - Tabbed - Heavy Duty on the Small Parts and Bearings website.
Bearings - Spherical OD
Bearings with a spherical outside diameter.
Combined listing of spherical OD track rollers and bearings for Linear Guide systems.
Related Information:
A larger range of Bearings - Spherical OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.
Dual Vee - Adaptor Bushings
Vee grooved track roller bushings.
Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned.
Related Information:
A larger range of Dual Vee - Adaptor Bushings might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.
Dual Vee - Guide Wheels
Vee grooved track roller guide wheels with Abec 5 precision bearings.
Match with correct Track Size.
Related Information:
A larger range of Dual Vee - Guide Wheels might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Guide Wheels on the Small Parts and Bearings website.
Pulleys - Timing - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Related Information:
There is also a good range of Pulleys - Timing - Idler on the Small Parts and Bearings website.
Sprockets - Idler
Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Related Information:
There is also a good range of Sprockets - Idler on the Small Parts and Bearings website.
Dual Vee - Guide Wheels - Studded
Vee grooved track roller guide wheels.
Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed.
Related Information:
A larger range of Dual Vee - Guide Wheels - Studded might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Guide Wheels - Studded on the Small Parts and Bearings website.
Most Common Heavy Duty Jockey Wheels Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
A larger range of Most Common Heavy Duty Jockey Wheels Parts might be available on the Bearing Shop Online site. There is also a good range of Most Common Heavy Duty Jockey Wheels Parts on the Small Parts and Bearings website.
Most Common Standard Duty Jockey Wheels Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
A larger range of Most Common Standard Duty Jockey Wheels Parts might be available on the Bearing Shop Online site. There is also a good range of Most Common Standard Duty Jockey Wheels Parts on the Small Parts and Bearings website.
Dual Vee - Tracks with Mounting Holes - Steel
Vee guide rails for vee grooved track roller guide wheels.
Match Track Size with same size Guide Wheel.
Related Information:
A larger range of Dual Vee - Tracks with Mounting Holes - Steel might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Tracks with Mounting Holes - Steel on the Small Parts and Bearings website.
Dual Vee - Tracks without Mounting Holes - Steel
Vee guide rails for vee grooved track roller guide wheels.
Match Track Size with same size Guide Wheel.
Related Information:
A larger range of Dual Vee - Tracks without Mounting Holes - Steel might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Tracks without Mounting Holes - Steel on the Small Parts and Bearings website.
Washers - Spring - Wave Type - Carbon Steel
Wave Washers - also called crinkle wave. Includes 2 and 3 wave types. This category includes EPL type bearing pre-load washers.
A larger range of Washers - Spring - Wave Type - Carbon Steel might be available on the Bearing Shop Online site. There is also a good range of Washers - Spring - Wave Type - Carbon Steel on the Small Parts and Bearings website.
Dual Vee - Tracks with Mounting Holes - Stainless Steel
Vee guide rails for vee grooved track roller guide wheels.
Match Track Size with same size Guide Wheel.
Related Information:
A larger range of Dual Vee - Tracks with Mounting Holes - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Tracks with Mounting Holes - Stainless Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125326 products in 2296 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
