Miniature Bearings Australia Pty Ltd

Bearings Tapered Roller Cup Categories


Bearings Tapered Roller


Bearings - Tapered Roller - Cup
Bearings - Tapered Roller - Cup

Replacements for existing tapered roller cups (outer part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.


A larger range of Bearings - Tapered Roller - Cup might be available on the Bearing Shop Online site. There is also a good range of Bearings - Tapered Roller - Cup on the Small Parts and Bearings website.


Bearings - Tapered Roller - Single Row - Metric
Bearings - Tapered Roller - Single Row - Metric

Includes cup and cone


A larger range of Bearings - Tapered Roller - Single Row - Metric might be available on the Bearing Shop Online site. There is also a good range of Bearings - Tapered Roller - Single Row - Metric on the Small Parts and Bearings website.


Bearings - Tapered Roller - Cone
Bearings - Tapered Roller - Cone

Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.


A larger range of Bearings - Tapered Roller - Cone might be available on the Bearing Shop Online site. There is also a good range of Bearings - Tapered Roller - Cone on the Small Parts and Bearings website.


You may also like

Pushbike Bearings


Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts
Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


A larger range of Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts might be available on the Bearing Shop Online site. There is also a good range of Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts on the Small Parts and Bearings website.


Clamping Rings


Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.


A larger range of Spiral Rings - External - Heavy Duty might be available on the Bearing Shop Online site. There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.


Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.


A larger range of Spiral Rings - Internal - Heavy Duty might be available on the Bearing Shop Online site. There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.


Plungers Ball


Sleeves - Tapered - Precision Indexing Plunger
Sleeves - Tapered - Precision Indexing Plunger

Also see combined categories:
All Sleeves for Plungers

Use with precision indexing plungers and locking bolts


There is also a good range of Sleeves - Tapered - Precision Indexing Plunger on the Small Parts and Bearings website.


Thread Inserts


Inserts - Tapered Fit - Finserts - For Wood and Plastics
Inserts - Tapered Fit - Finserts - For Wood and Plastics

Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout.


There is also a good range of Inserts - Tapered Fit - Finserts - For Wood and Plastics on the Small Parts and Bearings website.


Knobs Oval


Knobs - Oval Tapered - Press On - Phenolic
Knobs - Oval Tapered - Press On - Phenolic

Also see combined categories:
All Knobs

Press on knobs hold on securely without threads or set screws

Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.


There is also a good range of Knobs - Oval Tapered - Press On - Phenolic on the Small Parts and Bearings website.


Pins Taper


Pins - Taper - Metric - Carbon Steel
Pins - Taper - Metric - Carbon Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50

Metric Sizes to DIN 1.

Related Information:
Standard Imperial Taper Pin Sizes
Miniature Imperial Taper Pin Sizes

There is also a good range of Pins - Taper - Metric - Carbon Steel on the Small Parts and Bearings website.


Pins - Taper - Metric - Stainless Steel
Pins - Taper - Metric - Stainless Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50

Metric Sizes to DIN 1.

Related Information:
Standard Imperial Taper Pin Sizes
Miniature Imperial Taper Pin Sizes

There is also a good range of Pins - Taper - Metric - Stainless Steel on the Small Parts and Bearings website.


Bungs


Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:
Rectangular Bungs
Round Bungs

There is also a good range of Bungs and Caps - Reversible - Round on the Small Parts and Bearings website.


Pins Taper


Pins - Taper - Imperial - Miniature - Carbon Steel
Pins - Taper - Imperial - Miniature - Carbon Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.

Related Information:
Standard Taper Pin Sizes
Mild Steel Metric Taper Pins
Stainless Metric Taper Pins

There is also a good range of Pins - Taper - Imperial - Miniature - Carbon Steel on the Small Parts and Bearings website.


Pins - Taper - Imperial - Miniature - Stainless Steel
Pins - Taper - Imperial - Miniature - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.

Related Information:
Standard Taper Pin Sizes
Mild Steel Metric Taper Pins
Stainless Metric Taper Pins

There is also a good range of Pins - Taper - Imperial - Miniature - Stainless Steel on the Small Parts and Bearings website.


Pins - Taper - Imperial - Standard - Carbon Steel
Pins - Taper - Imperial - Standard - Carbon Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

Related Information:
Miniature Taper Pin Sizes
Mild Steel Metric Taper Pins
Stainless Metric Taper Pins

There is also a good range of Pins - Taper - Imperial - Standard - Carbon Steel on the Small Parts and Bearings website.


Pins - Taper - Metric - Extractable - Internal Thread
Pins - Taper - Metric - Extractable - Internal Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded internally for easy extraction.

DIN 7978. Mild Steel.

Related Information:
Remover and Setter Tool

There is also a good range of Pins - Taper - Metric - Extractable - Internal Thread on the Small Parts and Bearings website.


Keys and Keysteel


Keys - Gib Head - Steel
Keys - Gib Head - Steel

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).


There is also a good range of Keys - Gib Head - Steel on the Small Parts and Bearings website.


Pins Taper


Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel
Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

Threaded externally for easy extraction.

Related Information:
Miniature Taper Pin Sizes
Mild Steel Metric Taper Pins
Stainless Metric Taper Pins

There is also a good range of Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel on the Small Parts and Bearings website.


Keys and Keysteel


Keys - Gib Head - Zinc Plated
Keys - Gib Head - Zinc Plated

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).


There is also a good range of Keys - Gib Head - Zinc Plated on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122791 products in 2704 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122791 products in 2704 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.