Miniature Bearings Australia Pty Ltd

Bearings Special Purpose Categories


Bearings - Chamfered Edges
Bearings - Chamfered Edges


Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.

Related Information:

A larger range of Bearings - Chamfered Edges might be available on the Bearing Shop Online site. There is also a good range of Bearings - Chamfered Edges on the Small Parts and Bearings website.


Bearings - Spherical OD
Bearings - Spherical OD


Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Related Information:

A larger range of Bearings - Spherical OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Spherical OD on the Small Parts and Bearings website.


Bearings - Ball - Textile Industry
Bearings - Ball - Textile Industry


Special Design Stainless and Chrome Steel Bearings for the Textile Industry.

Bearings in this category often have special features. Designed for use in textile industry machinery.

Related Information:

A larger range of Bearings - Ball - Textile Industry might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Textile Industry on the Small Parts and Bearings website.


Bearings - Ball - 304 Stainless Steel
Bearings - Ball - 304 Stainless Steel

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm, Width +0/- 0.12 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:

A larger range of Bearings - Ball - 304 Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 304 Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - 4 Point Contact
Bearings - Ball - 4 Point Contact


4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Related Information:

A larger range of Bearings - Ball - 4 Point Contact might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 4 Point Contact on the Small Parts and Bearings website.


Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD


Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Related Information:

A larger range of Bearings - Gothic Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Gothic Groove Profile OD on the Small Parts and Bearings website.


You may also be interested in

Bearings Acetal Plastic


Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose


Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


A larger range of Bearings - Acetal - Special Purpose might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - Special Purpose on the Small Parts and Bearings website.


Bearings - Acetal - Special Types
Bearings - Acetal - Special Types


Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

A larger range of Bearings - Acetal - Special Types might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - Special Types on the Small Parts and Bearings website.


Bearings - Polypropylene - Special Types
Bearings - Polypropylene - Special Types


Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

A larger range of Bearings - Polypropylene - Special Types might be available on the Bearing Shop Online site. There is also a good range of Bearings - Polypropylene - Special Types on the Small Parts and Bearings website.


Mounts Cylindrical


Mounts - Cylindrical - Special Purpose
Mounts - Cylindrical - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).

There is also a good range of Mounts - Cylindrical - Special Purpose on the Small Parts and Bearings website.


Bearings Acetal Plastic


Bearings - Acetal - MRI Table
Bearings - Acetal - MRI Table


Special acetal bearings for MRI table wheels


A larger range of Bearings - Acetal - MRI Table might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - MRI Table on the Small Parts and Bearings website.


Bearings Grooved Profile


Bearings - U Groove Profile OD
Bearings - U Groove Profile OD

Also see combined categories:
All U Groove Bearings and Pulleys

Special OD Bearings.

Contact us for tolerances.

Related Information:

A larger range of Bearings - U Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - U Groove Profile OD on the Small Parts and Bearings website.


Bearings Acetal Plastic


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications


Special acetal bearings for disk cleaning


A larger range of Bearings - Acetal - Disk Cleaning Applications might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - Disk Cleaning Applications on the Small Parts and Bearings website.


Bearings Grooved Profile


Bearings - Square Groove Profile OD
Bearings - Square Groove Profile OD


Special bearings. Not readily available.


A larger range of Bearings - Square Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Square Groove Profile OD on the Small Parts and Bearings website.


Bearings - Vee Groove Profile OD
Bearings - Vee Groove Profile OD


Special OD Bearings.


Related Information:

A larger range of Bearings - Vee Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Vee Groove Profile OD on the Small Parts and Bearings website.


Fishing Reel Parts


Coastal In Shore Special 153H Daiwa Parts
Coastal In Shore Special 153H Daiwa Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

A larger range of Coastal In Shore Special 153H Daiwa Parts might be available on the Bearing Shop Online site. There is also a good range of Coastal In Shore Special 153H Daiwa Parts on the Small Parts and Bearings website.


Bearings 316 Stainless


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.


Shafting General Purpose


Shafting - Unground - Silver Steel
Shafting - Unground - Silver Steel

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Related Information:

There is also a good range of Shafting - Unground - Silver Steel on the Small Parts and Bearings website.


Bearings 316 Stainless


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.


Shafting General Purpose


Shafting - Carbon Steel - Keyed
Shafting - Carbon Steel - Keyed

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.

A larger range of Shafting - Carbon Steel - Keyed might be available on the Bearing Shop Online site. There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.

There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122207 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122207 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.