Covid-19 Update!! Current supply status.
Trading by online order and email.
Outbound Deliveries: Allow a few extra days within Australia and extra 7 days for overseas deliveries.
Pre-orders and Backorders: Allow extra 7 days due to quarantine precautions.
Distributors: Most MBA distributors are open and able to contact us using the distributor phone line.
Bearings Self Clinching Self Aligning Sintered Bronze Categories
Bearings Mounted
Bearings - Self Clinching - Self Aligning - Sintered Bronze
Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. There is also a good range of Bearings - Self Clinching - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.
Bearings - Self Clinching - Self Aligning - Delrin -tm-
Spyraflo acetal bearings in a special steel self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Delrin -tm- might be available on the Bearing Shop Online site. There is also a good range of Bearings - Self Clinching - Self Aligning - Delrin -tm- on the Small Parts and Bearings website.
Bearings - Self Clinching - Self Aligning - Needle Roller
Spyraflo needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Bearings - Self Clinching - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-
Spyraflo acetal bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.
See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).
Related Information:
A larger range of Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm- might be available on the Bearing Shop Online site. There is also a good range of Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm- on the Small Parts and Bearings website.
You may also be interested in
Housings with Bearing
Bearings - Self Clinching - Miniature - Self Aligning
Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.
Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.
A larger range of Bearings - Self Clinching - Miniature - Self Aligning might be available on the Bearing Shop Online site. There is also a good range of Bearings - Self Clinching - Miniature - Self Aligning on the Small Parts and Bearings website.
Bearings Mounted
Bearings - Press-Fit - Self Aligning - Sintered Bronze
Spyraflo sintered bronze bearings in specially designed press fit retainers
See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.
Related Information:
A larger range of Bearings - Press-Fit - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. There is also a good range of Bearings - Press-Fit - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - Sintered Bronze
Low profile self aligning flange mounted sintered bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.
Housings - Pillow Block - Self Aligning - Sintered Bronze
Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
Spyraflo robust light weight aluminium housing with porous sintered bronze
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
A larger range of Housings - Pillow Block - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. There is also a good range of Housings - Pillow Block - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.
Housings - Flanged - Self Aligning - Needle Roller
Spyraflo robust light weight aluminium housing with self aligning needle roller bearings
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
A larger range of Housings - Flanged - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Flanged - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Housings - Flanged - Self Aligning - Bronze - Heavy Duty
Spyraflo robust light weight aluminium housing with self aligning bronze bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
A larger range of Housings - Flanged - Self Aligning - Bronze - Heavy Duty might be available on the Bearing Shop Online site. There is also a good range of Housings - Flanged - Self Aligning - Bronze - Heavy Duty on the Small Parts and Bearings website.
Housings - Pillow Block - Self Aligning - Needle Roller
Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
Spyraflo robust light weight aluminium housing with self aligning needle roller bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.
Related Information:
A larger range of Housings - Pillow Block - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Pillow Block - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Bearings Ceramic
Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.
Related Information:
A larger range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Small Parts and Bearings website.
Bearings Mounted
Bearings - Press-Fit - Self Aligning - Delrin -tm-
Spyraflo acetal bearings in specially designed press fit retainers
See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.
Related Information:
A larger range of Bearings - Press-Fit - Self Aligning - Delrin -tm- might be available on the Bearing Shop Online site. There is also a good range of Bearings - Press-Fit - Self Aligning - Delrin -tm- on the Small Parts and Bearings website.
Bearings Thrust
Washers - Self Aligning - Sets - Plastic
Spherical Seat Washers
Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.
Related Information:
A larger range of Washers - Self Aligning - Sets - Plastic might be available on the Bearing Shop Online site. There is also a good range of Washers - Self Aligning - Sets - Plastic on the Small Parts and Bearings website.
Bearings Double Row Ball
Bearings - Ball - Double Row - Self Aligning - Parallel Bore
Related Information:
A larger range of Bearings - Ball - Double Row - Self Aligning - Parallel Bore might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Double Row - Self Aligning - Parallel Bore on the Small Parts and Bearings website.
Housings with Bearing
Housings - Bearing - Pedestal - Miniature - Self Aligning
Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.
Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.
A larger range of Housings - Bearing - Pedestal - Miniature - Self Aligning might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Pedestal - Miniature - Self Aligning on the Small Parts and Bearings website.
Linear Bearings with Housing
Housings - Bearing - Flange Mounted - Frelon - Self Aligning
Single and double length
Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.
There is also a good range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning on the Small Parts and Bearings website.
Bearings Mounted
Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-
Spyraflo low profile self aligning flange mounted acetal Delrin bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm- might be available on the Bearing Shop Online site. There is also a good range of Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm- on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - Delrin
Low profile self aligning flange mounted acetal Delrin bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - Delrin might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - Delrin on the Small Parts and Bearings website.
Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-
Spyraflo low profile self aligning flange mounted acetal Delrin AF bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm- might be available on the Bearing Shop Online site. There is also a good range of Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm- on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - Delrin AF
Low profile self aligning flange mounted acetal Delrin AF bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - Delrin AF might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - Delrin AF on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - Needle Roller
Low profile self aligning flange mounted needle roller bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - Needle Roller on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard
Low profile self aligning flange mounted PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp
Low profile self aligning flange mounted high temperature PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp on the Small Parts and Bearings website.
Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp
Low profile self aligning flange mounted low temperature PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Related Information:
A larger range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp on the Small Parts and Bearings website.
Housings with Bearing
Housings - Bearing - Flanged - Square - W300
With integral self aligning plain bearing.
Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.
A larger range of Housings - Bearing - Flanged - Square - W300 might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Flanged - Square - W300 on the Small Parts and Bearings website.
Housings - Bearing - Flanged - 2 Bolt Hole - W300
With integral self aligning plain bearing.
Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.
A larger range of Housings - Bearing - Flanged - 2 Bolt Hole - W300 might be available on the Bearing Shop Online site. There is also a good range of Housings - Bearing - Flanged - 2 Bolt Hole - W300 on the Small Parts and Bearings website.
Housings - Pillow Block - Washdown
Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings
Spyraflo electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.
Related Information:
A larger range of Housings - Pillow Block - Washdown might be available on the Bearing Shop Online site. There is also a good range of Housings - Pillow Block - Washdown on the Small Parts and Bearings website.
Bearings - Press-Fit - Acetal - SDP
Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.
Related Information:
A larger range of Bearings - Press-Fit - Acetal - SDP might be available on the Bearing Shop Online site. There is also a good range of Bearings - Press-Fit - Acetal - SDP on the Small Parts and Bearings website.
Washers - Self Aligning - Components - Hardened Steel
Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.
Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.
There is also a good range of Washers - Self Aligning - Components - Hardened Steel on the Small Parts and Bearings website.
Washers - Self Aligning - Components - Stainless Steel
Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.
AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.
There is also a good range of Washers - Self Aligning - Components - Stainless Steel on the Small Parts and Bearings website.
Washers - Self Aligning - Sets - Hardened Steel
Spherical Seat Washers
Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.
There is also a good range of Washers - Self Aligning - Sets - Hardened Steel on the Small Parts and Bearings website.
Washers - Self Aligning - Sets - Stainless Steel
Spherical Seat Washers
AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.
There is also a good range of Washers - Self Aligning - Sets - Stainless Steel on the Small Parts and Bearings website.
Rings - Hoist - Heavy Duty
Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.
Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.
There is also a good range of Rings - Hoist - Heavy Duty on the Small Parts and Bearings website.
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.
Related Information:
A larger range of Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning might be available on the Bearing Shop Online site. There is also a good range of Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning on the Small Parts and Bearings website.
Bearings - Linear - Frelon J Lined - Closed - Precision
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon J Lined - Closed - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon J Lined - Closed - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon J Lined - Closed - Standard
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon J Lined - Closed - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon J Lined - Closed - Standard on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Closed - Precision
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Closed - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Closed - Standard
Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Closed - Standard on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Open - Precision
Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Open - Precision might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Open - Precision on the Small Parts and Bearings website.
Bearings - Linear - Frelon Gold Lined - Open - Standard
Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings
Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C
Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.
Related Information:
A larger range of Bearings - Linear - Frelon Gold Lined - Open - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Frelon Gold Lined - Open - Standard on the Small Parts and Bearings website.
Housings - Flange Mount - Non Aligning - Bronze
Low profile flange mounted PTFE bronze bearings
See links at bottom of web page for more information.
Related Information:
A larger range of Housings - Flange Mount - Non Aligning - Bronze might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Non Aligning - Bronze on the Small Parts and Bearings website.
Housings - Flange Mount - Non Aligning - Needle Roller
Low profile flange mounted needle roller bearings
See links at bottom of web page for more information.
Related Information:
A larger range of Housings - Flange Mount - Non Aligning - Needle Roller might be available on the Bearing Shop Online site. There is also a good range of Housings - Flange Mount - Non Aligning - Needle Roller on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Closed
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Open
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Open might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Small Parts and Bearings website.
Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.
Related Information:
A larger range of Bearings - SDP - PTFE Filled Acetal - Flange Mounted might be available on the Bearing Shop Online site. There is also a good range of Bearings - SDP - PTFE Filled Acetal - Flange Mounted on the Small Parts and Bearings website.
Joints - Dual Eye - Parallel
Maintenance free - self lubricating thermoplastic. Mechanical joining linkage. Self aligning to compensate for angular misalignment. MSTS = Maximum Static Tensile Strength. MSAS = Maximum Static Axial Compressive Strength.
There is also a good range of Joints - Dual Eye - Parallel on the Small Parts and Bearings website.
Tube - Round - Sintered Bronze
Oil impregnated sintered bronze tubing - self lubricating. Product will machine to the sizes listed and is supplied will be larger on OD and smaller on bore.
Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on ID to allow for machining. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.
Related Information:
A larger range of Tube - Round - Sintered Bronze might be available on the Bearing Shop Online site. There is also a good range of Tube - Round - Sintered Bronze on the Small Parts and Bearings website.
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.
Related Information:
A larger range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP might be available on the Bearing Shop Online site. There is also a good range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP on the Small Parts and Bearings website.
Bushings - Spherical - Plastic
Plastic spherical plain bearings. Also known as ball bushings.
Ball Material W300. Housing Iglidur G. Maintenance Free. Self lubricating. Compensates for axial loads and misalignment. Corrosion resistant. High vibration dampening capacity.
A larger range of Bushings - Spherical - Plastic might be available on the Bearing Shop Online site. There is also a good range of Bushings - Spherical - Plastic on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125190 products in 2452 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
