Miniature Bearings Australia Pty Ltd

Bearings One Way Clutch Categories


Bearings - One Way Sprag - Standard
Bearings - One Way Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:

A larger range of Bearings - One Way Sprag - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - One Way Sprag - Standard on the Small Parts and Bearings website.


Bearings - One Way Roller
Bearings - One Way Roller

Also see combined categories:
All One Way Clutch Bearings

Roller Clutch Bearings rotate in one direction only.

Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm. This category may be available in the new MBA online store at Bearings - One Way Roller.

Related Information:

A larger range of Bearings - One Way Roller might be available on the Bearing Shop Online site. There is also a good range of Bearings - One Way Roller on the Small Parts and Bearings website.


You may also be interested in

Bearings Clutch


Bearings - Clutch Release - TNK Type
Bearings - Clutch Release - TNK Type

Also see combined categories:
All Clutch Release Bearings

This category may be available in the new MBA online store at Bearings - Clutch Release - TNK Type.

A larger range of Bearings - Clutch Release - TNK Type might be available on the Bearing Shop Online site.


Lazy Susan Bearings
Lazy Susan Bearings


One unit construction for maximum stability and quiet running. Used to make light weight turntables.

Centre opening allows for a centre post if required. This category may be available in the new MBA online store at Lazy Susan Bearings.

Related Information:

A larger range of Lazy Susan Bearings might be available on the Bearing Shop Online site. There is also a good range of Lazy Susan Bearings on the Small Parts and Bearings website.


Bearings - Cylindrical Roller - Single Row - Fixed Rings NUP Series
Bearings - Cylindrical Roller - Single Row - Fixed Rings NUP Series

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in one direction with supporting shoulder washer


A larger range of Bearings - Cylindrical Roller - Single Row - Fixed Rings NUP Series might be available on the Bearing Shop Online site.


Bass One Shimano Parts
Bass One Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

A larger range of Bass One Shimano Parts might be available on the Bearing Shop Online site. There is also a good range of Bass One Shimano Parts on the Small Parts and Bearings website.


Bearings - Cylindrical Roller - Single Row - Removable Inner Ring - NJ Series
Bearings - Cylindrical Roller - Single Row - Removable Inner Ring - NJ Series

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in one direction and shouldered on the opposite side


A larger range of Bearings - Cylindrical Roller - Single Row - Removable Inner Ring - NJ Series might be available on the Bearing Shop Online site.


Bearings - Cylindrical Roller - Single Row - Removable Outer Ring - NF Series
Bearings - Cylindrical Roller - Single Row - Removable Outer Ring - NF Series

Also see combined categories:
All Cylindrical Roller Bearings

Outer ring is removable in one direction


A larger range of Bearings - Cylindrical Roller - Single Row - Removable Outer Ring - NF Series might be available on the Bearing Shop Online site.


Locknuts - Stainless Insert
Locknuts - Stainless Insert


Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (P’) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.

Related Information:

There is also a good range of Locknuts - Stainless Insert on the Small Parts and Bearings website.


Bearings - Ball Thrust Grooved - Chrome Steel
Bearings - Ball Thrust Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Grooved - Chrome Steel.

Related Information:

A larger range of Bearings - Ball Thrust Grooved - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball Thrust Grooved - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball Thrust Grooved - Stainless Steel
Bearings - Ball Thrust Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Grooved - Stainless Steel.

Related Information:

A larger range of Bearings - Ball Thrust Grooved - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball Thrust Grooved - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball Thrust Flat - Chrome Steel
Bearings - Ball Thrust Flat - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Flat - Chrome Steel.

Related Information:

A larger range of Bearings - Ball Thrust Flat - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball Thrust Flat - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball Thrust Flat - Stainless Steel
Bearings - Ball Thrust Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Flat - Stainless Steel.

Related Information:

A larger range of Bearings - Ball Thrust Flat - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball Thrust Flat - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball Thrust Grooved - ZRO2 Ceramic
Bearings - Ball Thrust Grooved - ZRO2 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Ball Thrust Grooved - ZRO2 Ceramic.

Related Information:

A larger range of Bearings - Ball Thrust Grooved - ZRO2 Ceramic might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball Thrust Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.


Bearings - Single Row Ball Unflanged - Standard - Ceramic Hybrid
Bearings - Single Row Ball Unflanged - Standard - Ceramic Hybrid

Also see combined categories:
All Radial Ball Bearings

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category may be available in the new MBA online store at Bearings - Single Row Ball Unflanged - Standard - Ceramic Hybrid.

Related Information:

A larger range of Bearings - Single Row Ball Unflanged - Standard - Ceramic Hybrid might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Unflanged - Standard - Ceramic Hybrid on the Small Parts and Bearings website.


Bearings - Single Row Ball Chamfered Edges - Standard
Bearings - Single Row Ball Chamfered Edges - Standard


Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP. This category may be available in the new MBA online store at Bearings - Single Row Ball Chamfered Edges - Standard.

Related Information:

A larger range of Bearings - Single Row Ball Chamfered Edges - Standard might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Chamfered Edges - Standard on the Small Parts and Bearings website.


Rail Supports - With Shaft - One Piece
Rail Supports - With Shaft - One Piece

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments. This category may be available in the new MBA online store at Rail Supports - With Shaft - One Piece.

Related Information:

A larger range of Rail Supports - With Shaft - One Piece might be available on the Bearing Shop Online site. There is also a good range of Rail Supports - With Shaft - One Piece on the Small Parts and Bearings website.


Slides - Linear - Cross Roller Rail
Slides - Linear - Cross Roller Rail

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds. This category may be available in the new MBA online store at Slides - Linear - Cross Roller Rail.

A larger range of Slides - Linear - Cross Roller Rail might be available on the Bearing Shop Online site. There is also a good range of Slides - Linear - Cross Roller Rail on the Small Parts and Bearings website.


Bearings - Tapered Roller Cone
Bearings - Tapered Roller Cone


Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.

This category may be available in the new MBA online store at Bearings - Tapered Roller Cone.

A larger range of Bearings - Tapered Roller Cone might be available on the Bearing Shop Online site. There is also a good range of Bearings - Tapered Roller Cone on the Small Parts and Bearings website.


Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.

There is also a good range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage on the Small Parts and Bearings website.


Bearings - Plastic - PEEK with Glass Balls
Bearings - Plastic - PEEK with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

PEEK (Polyetheretherketone), is a high temperature, high-performance engineering polymer.

Races made from PEEK - Balls made from 316 Stainless Steel - Cages from PEEK. PEEK offers chemical and water resistance similar to PPS (Polyphenylene Sulfide) but can operate at higher temperatures. PEEK can be used continuously to 338 Deg F (170 Deg C) and in hot water or steam without permanent loss in physical properties. Wear, Chemical & Hydrolysis Resistant. Exceptional performance over a wide range of temperatures and extreme conditions. Low Smoke and Toxic Gas Emission.

Related Information:

A larger range of Bearings - Plastic - PEEK with Glass Balls might be available on the Bearing Shop Online site. There is also a good range of Bearings - Plastic - PEEK with Glass Balls on the Small Parts and Bearings website.


Bearings - Plastic - PEEK with 316 Stainless Steel Balls
Bearings - Plastic - PEEK with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

PEEK (Polyetheretherketone), is a high temperature, high-performance engineering polymer.

Races made from PEEK - Balls made from Ground Glass - Cages from PEEK. PEEK offers chemical and water resistance similar to PPS (Polyphenylene Sulfide) but can operate at higher temperatures. PEEK can be used continuously to 338 Deg F (170 Deg C) and in hot water or steam without permanent loss in physical properties. Wear, Chemical & Hydrolysis Resistant. Exceptional performance over a wide range of temperatures and extreme conditions. Low Smoke and Toxic Gas Emission.

Related Information:

A larger range of Bearings - Plastic - PEEK with 316 Stainless Steel Balls might be available on the Bearing Shop Online site. There is also a good range of Bearings - Plastic - PEEK with 316 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Tapered Roller Set - Single Row - Metric
Bearings - Tapered Roller Set - Single Row - Metric


Includes cup and cone

This category may be available in the new MBA online store at Bearings - Tapered Roller Set - Single Row - Metric.

A larger range of Bearings - Tapered Roller Set - Single Row - Metric might be available on the Bearing Shop Online site.


Bearings - Tapered Roller Set - Single Row - Inch
Bearings - Tapered Roller Set - Single Row - Inch


Common automotive sets include cup and cone

This category may be available in the new MBA online store at Bearings - Tapered Roller Set - Single Row - Inch.

A larger range of Bearings - Tapered Roller Set - Single Row - Inch might be available on the Bearing Shop Online site.


Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

A larger range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel on the Small Parts and Bearings website.


Rollers - Durasoft - Shaft Mount - With Ball Bearing
Rollers - Durasoft - Shaft Mount - With Ball Bearing

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - With Ball Bearing.

A larger range of Rollers - Durasoft - Shaft Mount - With Ball Bearing might be available on the Bearing Shop Online site. There is also a good range of Rollers - Durasoft - Shaft Mount - With Ball Bearing on the Small Parts and Bearings website.


Bearings - Angular Contact - Single Row Ball - Chrome Steel
Bearings - Angular Contact - Single Row Ball - Chrome Steel

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings. This category may be available in the new MBA online store at Bearings - Angular Contact - Single Row Ball - Chrome Steel.

Related Information:

A larger range of Bearings - Angular Contact - Single Row Ball - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Angular Contact - Single Row Ball - Chrome Steel on the Small Parts and Bearings website.


Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4
Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4 might be available on the Bearing Shop Online site. There is also a good range of Bearings - Angular Contact - Single Row Ball - Ceramic Si3N4 on the Small Parts and Bearings website.


Bearings - Angular Contact - Single Row Ball - Ceramic ZRO2
Bearings - Angular Contact - Single Row Ball - Ceramic ZRO2

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Angular Contact - Single Row Ball - Ceramic ZRO2 might be available on the Bearing Shop Online site. There is also a good range of Bearings - Angular Contact - Single Row Ball - Ceramic ZRO2 on the Small Parts and Bearings website.


Bearings - Double Row Ball - Self Aligning - Ceramic ZrO2
Bearings - Double Row Ball - Self Aligning - Ceramic ZrO2

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Double Row Ball - Self Aligning - Ceramic ZrO2 might be available on the Bearing Shop Online site. There is also a good range of Bearings - Double Row Ball - Self Aligning - Ceramic ZrO2 on the Small Parts and Bearings website.


Bearings - Single Row Ball Unflanged - Standard - Ceramic Si3N4
Bearings - Single Row Ball Unflanged - Standard - Ceramic Si3N4

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Single Row Ball Unflanged - Standard - Ceramic Si3N4 might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Unflanged - Standard - Ceramic Si3N4 on the Small Parts and Bearings website.


Bearings - Single Row Ball Unflanged - Standard - Ceramic ZrO2
Bearings - Single Row Ball Unflanged - Standard - Ceramic ZrO2

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Single Row Ball Unflanged - Standard - Ceramic ZrO2 might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Unflanged - Standard - Ceramic ZrO2 on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Double Row - Plastic
Bearings - Conveyor - Hex Bore - Double Row - Plastic

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Double Row - Plastic.

A larger range of Bearings - Conveyor - Hex Bore - Double Row - Plastic might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Double Row - Plastic on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Double Row - Stainless Steel
Bearings - Conveyor - Hex Bore - Double Row - Stainless Steel

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Double Row - Stainless Steel.

A larger range of Bearings - Conveyor - Hex Bore - Double Row - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Double Row - Stainless Steel on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Single Row - Plastic
Bearings - Conveyor - Hex Bore - Single Row - Plastic

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Single Row - Plastic.

A larger range of Bearings - Conveyor - Hex Bore - Single Row - Plastic might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Single Row - Plastic on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Single Row - Stainless Steel
Bearings - Conveyor - Hex Bore - Single Row - Stainless Steel

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Single Row - Stainless Steel.

A larger range of Bearings - Conveyor - Hex Bore - Single Row - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Single Row - Stainless Steel on the Small Parts and Bearings website.


Bearings - Cylindrical Roller - Double Row - Parallel Bore NN Series
Bearings - Cylindrical Roller - Double Row - Parallel Bore NN Series

Also see combined categories:
All Cylindrical Roller Bearings

Outer Ring Removable


A larger range of Bearings - Cylindrical Roller - Double Row - Parallel Bore NN Series might be available on the Bearing Shop Online site.


Bearings - Cylindrical Roller - Double Row - Tapered Bore NN-K Series
Bearings - Cylindrical Roller - Double Row - Tapered Bore NN-K Series

Also see combined categories:
All Cylindrical Roller Bearings

Outer Ring Removable


A larger range of Bearings - Cylindrical Roller - Double Row - Tapered Bore NN-K Series might be available on the Bearing Shop Online site.


Bearings - Cylindrical Roller - Single Row - Removable Inner Ring - NU Series
Bearings - Cylindrical Roller - Single Row - Removable Inner Ring - NU Series

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in both directions


A larger range of Bearings - Cylindrical Roller - Single Row - Removable Inner Ring - NU Series might be available on the Bearing Shop Online site.


Bearings - Cylindrical Roller - Single Row - Removable Outer Ring - N Series
Bearings - Cylindrical Roller - Single Row - Removable Outer Ring - N Series

Also see combined categories:
All Cylindrical Roller Bearings

Outer ring is removable in both directions


A larger range of Bearings - Cylindrical Roller - Single Row - Removable Outer Ring - N Series might be available on the Bearing Shop Online site.


Bearings - Angular Contact - Double Row Ball - Chrome Steel
Bearings - Angular Contact - Double Row Ball - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

This category may be available in the new MBA online store at Bearings - Angular Contact - Double Row Ball - Chrome Steel.

Related Information:

A larger range of Bearings - Angular Contact - Double Row Ball - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Angular Contact - Double Row Ball - Chrome Steel on the Small Parts and Bearings website.


Bearings - Angular Contact - Double Row Ball - Stainless Steel
Bearings - Angular Contact - Double Row Ball - Stainless Steel

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

This category may be available in the new MBA online store at Bearings - Angular Contact - Double Row Ball - Stainless Steel.

Related Information:

A larger range of Bearings - Angular Contact - Double Row Ball - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Angular Contact - Double Row Ball - Stainless Steel on the Small Parts and Bearings website.


Bearings - Double Row Ball - Radial - Chrome Steel
Bearings - Double Row Ball - Radial - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings

This category may be available in the new MBA online store at Bearings - Double Row Ball - Radial - Chrome Steel.

Related Information:

A larger range of Bearings - Double Row Ball - Radial - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Double Row Ball - Radial - Chrome Steel on the Small Parts and Bearings website.


Bearings - Double Row Ball - Self Aligning - Parallel Bore
Bearings - Double Row Ball - Self Aligning - Parallel Bore

Also see combined categories:
All Double Row Ball Bearings
All Self Aligning Ball Bearings

This category may be available in the new MBA online store at Bearings - Double Row Ball - Self Aligning - Parallel Bore.

Related Information:

A larger range of Bearings - Double Row Ball - Self Aligning - Parallel Bore might be available on the Bearing Shop Online site. There is also a good range of Bearings - Double Row Ball - Self Aligning - Parallel Bore on the Small Parts and Bearings website.


Bearings - Single Row Ball Flanged - Extended Inner - 440C Stainless
Bearings - Single Row Ball Flanged - Extended Inner - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings).

Related Information:

A larger range of Bearings - Single Row Ball Flanged - Extended Inner - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Flanged - Extended Inner - 440C Stainless on the Small Parts and Bearings website.


Bearings - Single Row Ball Flanged - Extended Inner - Chrome Steel
Bearings - Single Row Ball Flanged - Extended Inner - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

A larger range of Bearings - Single Row Ball Flanged - Extended Inner - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Flanged - Extended Inner - Chrome Steel on the Small Parts and Bearings website.


Bearings - Single Row Ball Flanged - Extended Inner High Precision Stainless
Bearings - Single Row Ball Flanged - Extended Inner High Precision Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

A larger range of Bearings - Single Row Ball Flanged - Extended Inner High Precision Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Flanged - Extended Inner High Precision Stainless on the Small Parts and Bearings website.


Bearings - Single Row Ball Flanged - High Precision Stainless
Bearings - Single Row Ball Flanged - High Precision Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. High precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive). This category may be available in the new MBA online store at Bearings - Single Row Ball Flanged - High Precision Stainless.

Related Information:

A larger range of Bearings - Single Row Ball Flanged - High Precision Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Flanged - High Precision Stainless on the Small Parts and Bearings website.


Bearings - Single Row Ball Flanged - Standard - 440C Stainless
Bearings - Single Row Ball Flanged - Standard - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Single Row Ball Flanged - Standard - 440C Stainless.

Related Information:

A larger range of Bearings - Single Row Ball Flanged - Standard - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Flanged - Standard - 440C Stainless on the Small Parts and Bearings website.


Bearings - Single Row Ball Flanged - Standard - Chrome Steel
Bearings - Single Row Ball Flanged - Standard - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Single Row Ball Flanged - Standard - Chrome Steel.

Related Information:

A larger range of Bearings - Single Row Ball Flanged - Standard - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Single Row Ball Flanged - Standard - Chrome Steel on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.