Miniature Bearings Australia Pty Ltd

Searched For: Bearings Grooved Profile Categories


Bearings Grooved Profile


Bearings - U Groove Profile OD
Bearings - U Groove Profile OD


Special OD Bearings.

Contact us for tolerances. This category may be available in the new MBA online store at Bearings - U Groove Profile OD.

Related Information:

A larger range of Bearings - U Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - U Groove Profile OD on the Small Parts and Bearings website.


Bearings - Square Groove Profile OD
Bearings - Square Groove Profile OD


Special bearings. Not readily available.

This category may be available in the new MBA online store at Bearings - Square Groove Profile OD.

A larger range of Bearings - Square Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Square Groove Profile OD on the Small Parts and Bearings website.


Bearings - Vee Groove Profile OD
Bearings - Vee Groove Profile OD


Special OD Bearings.

This category may be available in the new MBA online store at Bearings - Vee Groove Profile OD.

Related Information:

A larger range of Bearings - Vee Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Vee Groove Profile OD on the Small Parts and Bearings website.


You may also be interested in

Bearings Thrust


Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - Chrome Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - Stainless Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic on the Small Parts and Bearings website.


Pulleys Grooved


Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings. This category may be available in the new MBA online store at Pulleys - U Groove - Idler - Steel - With Bearing.

Related Information:

There is also a good range of Pulleys - U Groove - Idler - Steel - With Bearing on the Small Parts and Bearings website.


Dual Vee Bearings


Dual Vee - Adaptor Bushings
Dual Vee - Adaptor Bushings


Vee grooved track roller bushings.

Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned. This category may be available in the new MBA online store at Dual Vee - Adaptor Bushings.

Related Information:

A larger range of Dual Vee - Adaptor Bushings might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Adaptor Bushings on the Small Parts and Bearings website.


Dual Vee - Guide Wheels
Dual Vee - Guide Wheels

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels with Abec 5 precision bearings.

Match with correct Track Size. This category may be available in the new MBA online store at Dual Vee - Guide Wheels.

Related Information:

A larger range of Dual Vee - Guide Wheels might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Guide Wheels on the Small Parts and Bearings website.


Pulleys Grooved


Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings. This category may be available in the new MBA online store at Pulleys - U Groove - Idler - Plastic - With Ball Bearing.

Related Information:

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on the Small Parts and Bearings website.


Dual Vee Bearings


Dual Vee - Guide Wheels - Studded
Dual Vee - Guide Wheels - Studded

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels.

Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed. This category may be available in the new MBA online store at Dual Vee - Guide Wheels - Studded.

Related Information:

A larger range of Dual Vee - Guide Wheels - Studded might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Guide Wheels - Studded on the Small Parts and Bearings website.


Dual Vee - Tracks with Mounting Holes - Steel
Dual Vee - Tracks with Mounting Holes - Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel. This category may be available in the new MBA online store at Dual Vee - Tracks with Mounting Holes - Steel.

Related Information:

A larger range of Dual Vee - Tracks with Mounting Holes - Steel might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Tracks with Mounting Holes - Steel on the Small Parts and Bearings website.


Pulleys Grooved


Pulleys - U Groove - Idler - Plastic - With Plain Bore
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings. This category may be available in the new MBA online store at Pulleys - U Groove - Idler - Plastic - With Plain Bore.

Related Information:

There is also a good range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on the Small Parts and Bearings website.


Dual Vee Bearings


Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel. This category may be available in the new MBA online store at Dual Vee - Tracks with Mounting Holes - Stainless Steel.

Related Information:

A larger range of Dual Vee - Tracks with Mounting Holes - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Dual Vee - Tracks with Mounting Holes - Stainless Steel on the Small Parts and Bearings website.


Bearings Special Purpose


Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD


Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring. This category may be available in the new MBA online store at Bearings - Gothic Groove Profile OD.

Related Information:

A larger range of Bearings - Gothic Groove Profile OD might be available on the Bearing Shop Online site. There is also a good range of Bearings - Gothic Groove Profile OD on the Small Parts and Bearings website.


Bearings Single Row Ball


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Bearings with Snap Ring or Groove

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - With Snap Ring Groove Only - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Washers Only - Chrome Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Washers Only - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Washers Only - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. This category may be available in the new MBA online store at Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Related Information:

A larger range of Bearings - Thrust - Ball - Washers Only - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - Chrome Steel
Bearings - Ball - Angular Contact - Chrome Steel

Also see combined categories:
All Angular Contact Bearings

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings. This category may be available in the new MBA online store at Bearings - Ball - Angular Contact - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Angular Contact - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Angular Contact - Chrome Steel on the Small Parts and Bearings website.


Bearings - Tapered Roller - Single Row - Inch Sets
Bearings - Tapered Roller - Single Row - Inch Sets


Common automotive sets include cup and cone

This category may be available in the new MBA online store at Bearings - Tapered Roller - Single Row - Inch Sets.

A larger range of Bearings - Tapered Roller - Single Row - Inch Sets might be available on the Bearing Shop Online site.


Bearings - Ball - Ceramic Hybrid
Bearings - Ball - Ceramic Hybrid

Also see combined categories:
All Radial Ball Bearings

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category may be available in the new MBA online store at Bearings - Ball - Ceramic Hybrid.

Related Information:

A larger range of Bearings - Ball - Ceramic Hybrid might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Ceramic Hybrid on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Ceramic Si3N4 - Angular Contact might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ceramic Si3N4 - Angular Contact on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Ceramic Si3N4 - Radial might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ceramic Si3N4 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic ZRO2- Angular Contact
Bearings - Ceramic ZRO2- Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Ceramic ZRO2- Angular Contact might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ceramic ZRO2- Angular Contact on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Ceramic ZrO2 - Radial might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ceramic ZrO2 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.

Related Information:

A larger range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Small Parts and Bearings website.


Bearings - Clutch Release - TNK Type
Bearings - Clutch Release - TNK Type

Also see combined categories:
All Clutch Release Bearings

This category may be available in the new MBA online store at Bearings - Clutch Release - TNK Type.

A larger range of Bearings - Clutch Release - TNK Type might be available on the Bearing Shop Online site.


Bearings - Conveyor - Hex Bore - Plastic - Double Row
Bearings - Conveyor - Hex Bore - Plastic - Double Row

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Plastic - Double Row.

A larger range of Bearings - Conveyor - Hex Bore - Plastic - Double Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Double Row on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Plastic - Single Row
Bearings - Conveyor - Hex Bore - Plastic - Single Row

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Plastic - Single Row.

A larger range of Bearings - Conveyor - Hex Bore - Plastic - Single Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Single Row on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row.

A larger range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row on the Small Parts and Bearings website.


Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended. This category may be available in the new MBA online store at Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row.

A larger range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row on the Small Parts and Bearings website.


Bearings - Roller - Cylindrical - Double Row NN Series
Bearings - Roller - Cylindrical - Double Row NN Series

Also see combined categories:
All Cylindrical Roller Bearings

Outer Ring Removable

This category may be available in the new MBA online store at Bearings - Roller - Cylindrical - Double Row NN Series.

A larger range of Bearings - Roller - Cylindrical - Double Row NN Series might be available on the Bearing Shop Online site.


Bearings - Roller - Cylindrical - Double Row - Tapered Bore NN-K Series
Bearings - Roller - Cylindrical - Double Row - Tapered Bore NN-K Series

Also see combined categories:
All Cylindrical Roller Bearings

Outer Ring Removable


A larger range of Bearings - Roller - Cylindrical - Double Row - Tapered Bore NN-K Series might be available on the Bearing Shop Online site.


Bearings - Roller - Cylindrical - NF Series - Removable Outer Ring
Bearings - Roller - Cylindrical - NF Series - Removable Outer Ring

Also see combined categories:
All Cylindrical Roller Bearings

Outer ring is removable in one direction


A larger range of Bearings - Roller - Cylindrical - NF Series - Removable Outer Ring might be available on the Bearing Shop Online site.


Bearings - Roller - Cylindrical - NJ Series - Removable Inner Ring
Bearings - Roller - Cylindrical - NJ Series - Removable Inner Ring

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in one direction and shouldered on the opposite side


A larger range of Bearings - Roller - Cylindrical - NJ Series - Removable Inner Ring might be available on the Bearing Shop Online site.


Bearings - Roller - Cylindrical - N Series - Removable Outer Ring
Bearings - Roller - Cylindrical - N Series - Removable Outer Ring

Also see combined categories:
All Cylindrical Roller Bearings

Outer ring is removable in both directions

This category may be available in the new MBA online store at Bearings - Roller - Cylindrical - N Series - Removable Outer Ring.

A larger range of Bearings - Roller - Cylindrical - N Series - Removable Outer Ring might be available on the Bearing Shop Online site.


Bearings - Roller - Cylindrical - NUP Series - Fixed Inner and Outer Rings
Bearings - Roller - Cylindrical - NUP Series - Fixed Inner and Outer Rings

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in one direction with supporting shoulder washer


A larger range of Bearings - Roller - Cylindrical - NUP Series - Fixed Inner and Outer Rings might be available on the Bearing Shop Online site.


Bearings - Roller - Cylindrical - NU Series - Removable Inner Ring
Bearings - Roller - Cylindrical - NU Series - Removable Inner Ring

Also see combined categories:
All Cylindrical Roller Bearings

Inner ring is removable in both directions


A larger range of Bearings - Roller - Cylindrical - NU Series - Removable Inner Ring might be available on the Bearing Shop Online site.


Bearings - Ball - Double Row - Angular Contact - Chrome Steel
Bearings - Ball - Double Row - Angular Contact - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Angular Contact - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Double Row - Angular Contact - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Double Row - Angular Contact - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Double Row - Angular Contact - Stainless Steel
Bearings - Ball - Double Row - Angular Contact - Stainless Steel

Also see combined categories:
All Double Row Ball Bearings

Double Row Ball Bearings - Angular Contact.

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Angular Contact - Stainless Steel.

Related Information:

A larger range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - Double Row - Radial - Chrome Steel
Bearings - Ball - Double Row - Radial - Chrome Steel

Also see combined categories:
All Double Row Ball Bearings

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Radial - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Double Row - Radial - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Double Row - Radial - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Double Row - Self Aligning - Parallel Bore
Bearings - Ball - Double Row - Self Aligning - Parallel Bore

Also see combined categories:
All Double Row Ball Bearings
All Self Aligning Ball Bearings

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Self Aligning - Parallel Bore.

Related Information:

A larger range of Bearings - Ball - Double Row - Self Aligning - Parallel Bore might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Double Row - Self Aligning - Parallel Bore on the Small Parts and Bearings website.


Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - 440C Stainless on the Small Parts and Bearings website.


Bearings - Ball - Flanged - Chrome Steel
Bearings - Ball - Flanged - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Flanged - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Flanged - High Precision - 440C Stainless
Bearings - Ball - Flanged - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive). This category may be available in the new MBA online store at Bearings - Ball - Flanged - High Precision - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - High Precision - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - High Precision - 440C Stainless on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - WIR - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - WIR - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - WIR - 440C Stainless on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - Chrome Steel
Bearings - Ball - Flanged - WIR - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. This category may be available in the new MBA online store at Bearings - Ball - Flanged - WIR - Chrome Steel.

Related Information:

A larger range of Bearings - Ball - Flanged - WIR - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - WIR - Chrome Steel on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive). This category may be available in the new MBA online store at Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless.

Related Information:

A larger range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless on the Small Parts and Bearings website.


Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings
Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings


Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

A larger range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings might be available on the Bearing Shop Online site. There is also a good range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings on the Small Parts and Bearings website.


Bearings - Acetal - Solid - For Plastic Housings
Bearings - Acetal - Solid - For Plastic Housings


Insert bearings ideal for wet conditions. Similar to wide inner ring bearings for P, F, Fl type housings but solid plastic.

Load and speed calculations are for reference only. Testing is recommended. This category may be available in the new MBA online store at Bearings - Acetal - Solid - For Plastic Housings.

Related Information:

A larger range of Bearings - Acetal - Solid - For Plastic Housings might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - Solid - For Plastic Housings on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 219142 products in 2171 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 219142 products in 2171 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.