Bearings Ball 316 Stainless Steel Single Row Open Categories
Bearings Stainless Special Grades
Bearings - Ball - 316 Stainless Steel - Single Row - Open
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
Related Information:
A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Open might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.
You may also be interested in
Bearings Acetal Plastic
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
A larger range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings Stainless Special Grades
Bearings - Ball - 316 Stainless Steel - Double Row - Open
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
Related Information:
A larger range of Bearings - Ball - 316 Stainless Steel - Double Row - Open might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 316 Stainless Steel - Double Row - Open on the Small Parts and Bearings website.
Bearings Single Row Ball
Bearings - Ball - 440C Stainless
Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
Stainless steel radial ball bearings
Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - 440C Stainless on the Small Parts and Bearings website.
Bearings Acetal Plastic
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
A larger range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings Single Row Ball
Bearings - Ball - WIR - 440C Stainless
Stainless Steel Bearings with a Snap Ring on the OD
Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - WIR - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - WIR - 440C Stainless on the Small Parts and Bearings website.
Bearings - Ball - High Precision - 440C Stainless
Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
Stainless Steel Bearings - Abec 5 and Abec 7.
Single row radial ball bearings. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
Related Information:
A larger range of Bearings - Ball - High Precision - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - High Precision - 440C Stainless on the Small Parts and Bearings website.
Bearings - Ball - WIR - High Precision - 440C Stainless
Stainless Steel Bearings - Abec 5 and Abec 7.
Single row radial ball bearings with extended inner ring (wide inner ring). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
Related Information:
A larger range of Bearings - Ball - WIR - High Precision - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - WIR - High Precision - 440C Stainless on the Small Parts and Bearings website.
Bearings Flanged Ball
Bearings - Ball - Flanged - 440C Stainless
Stainless Steel Bearings with Flanges.
Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - Flanged - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - 440C Stainless on the Small Parts and Bearings website.
Bearings - Ball - Flanged - WIR - 440C Stainless
Stainless Steel Bearings with Flanges.
Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - Flanged - WIR - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - WIR - 440C Stainless on the Small Parts and Bearings website.
Bearings Conveyor
Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row
316 stainless conveyor bearings with plastic cage and plastic hex insert
Loads and Speeds are for reference only. Testing recommended.
A larger range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row on the Small Parts and Bearings website.
Bearings Flanged Ball
Bearings - Ball - Flanged - High Precision - 440C Stainless
Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.
Single row radial ball bearings with flanges. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
Related Information:
A larger range of Bearings - Ball - Flanged - High Precision - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - High Precision - 440C Stainless on the Small Parts and Bearings website.
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.
Single row radial ball bearings with flanges and extended inner rings (wide inner rings). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
Related Information:
A larger range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless on the Small Parts and Bearings website.
Bearings Acetal Plastic
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
A larger range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls might be available on the Bearing Shop Online site. There is also a good range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings Conveyor
Bearings - Conveyor - Hex Bore - Plastic - Single Row
Plastic hex bore conveyor bearings with 316 stainless balls
Loads and Speeds are for reference only. Testing recommended.
A larger range of Bearings - Conveyor - Hex Bore - Plastic - Single Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Single Row on the Small Parts and Bearings website.
Ball Transfers
Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel
Single ball bearings units for conveyor systems
A larger range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel on the Small Parts and Bearings website.
Bearings Single Row Ball
Bearings - Ball - Economy - 440C Stainless
Taiwanese or Italian Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.
Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - Economy - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Economy - 440C Stainless on the Small Parts and Bearings website.
Bearings Thrust
Bearings - Thrust - Ball - Flat - Stainless Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Flat - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Grooved - Stainless Steel
3 Piece Thrust Bearings Open Type
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
A larger range of Bearings - Thrust - Ball - Grooved - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.
Bearings Angular Contact
Bearings - Ball - Angular Contact - Flanged - 440C Stainless
Single row angular contact ball bearings with flanges.
Related Information:
A larger range of Bearings - Ball - Angular Contact - Flanged - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Angular Contact - Flanged - 440C Stainless on the Small Parts and Bearings website.
Linear Bearings
Bearings - Linear - Sliding - Stainless - PTFE - Open
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Open might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Small Parts and Bearings website.
Bearings Angular Contact
Bearings - Ball - Angular Contact - 440C Stainless
Including miniature sizes down to 8mm from stock and even smaller available.
Single row angular contact ball bearings.
Related Information:
A larger range of Bearings - Ball - Angular Contact - 440C Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Angular Contact - 440C Stainless on the Small Parts and Bearings website.
Bearings Double Row Ball
Bearings - Ball - Double Row - Angular Contact - Stainless Steel
Double Row Ball Bearings - Angular Contact.
Related Information:
A larger range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Double Row - Angular Contact - Stainless Steel on the Small Parts and Bearings website.
Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row
316 stainless conveyor bearings with plastic cage and plastic hex insert
Loads and Speeds are for reference only. Testing recommended.
A larger range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row on the Small Parts and Bearings website.
Bearings - Ball - Chrome Steel
Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
Chrome steel radial ball bearings.
Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - Economy - Chrome Steel
Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.
Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - Economy - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Economy - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - WIR - Chrome Steel
Chrome Steel Bearings with a Snap Ring on the OD
Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - WIR - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - WIR - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - High Precision - Chrome Steel
Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
Chrome Steel Bearings - Abec 5 and Abec 7.
Single row radial ball bearings. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).
Related Information:
A larger range of Bearings - Ball - High Precision - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - High Precision - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - With Snap Ring - Chrome Steel
Chrome Steel Bearings with a Snap Ring on the OD
Single row radial ball bearings with snap ring. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - With Snap Ring - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - WIR - With Snap Ring - Chrome Steel
Chrome Steel Bearings with a Snap Ring on the OD
Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.
Single row radial ball bearings with snap ring groove. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - Flanged - Chrome Steel
Chrome Steel Bearings with Flanges.
Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - Flanged - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - Flanged - WIR - Chrome Steel
Chrome Steel Bearings with Flanges.
Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
A larger range of Bearings - Ball - Flanged - WIR - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Flanged - WIR - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - AISI304 Stainless Steel
Corrosion and Heat resistance - Non Magnetic - Non Hardenable. Quality Japanese manufacture.
Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm up to 10mm bore, Width +0/- 0.12 mm. Mid range speed and load between 304 stainless and 440C stainless. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages, balls, races and shields from AISI 304 Stainless Steel.
Related Information:
A larger range of Bearings - Ball - AISI304 Stainless Steel might be available on the Bearing Shop Online site.
Ball Transfer Units - Flange Mount - Standard - Stainless - Deep
Single ball bearings units for conveyor systems
A larger range of Ball Transfer Units - Flange Mount - Standard - Stainless - Deep might be available on the Bearing Shop Online site. There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Deep on the Small Parts and Bearings website.
Ball Transfer Units - Flange Mount - Standard - Stainless - Slim
Single ball bearings units for conveyor systems
A larger range of Ball Transfer Units - Flange Mount - Standard - Stainless - Slim might be available on the Bearing Shop Online site. There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Slim on the Small Parts and Bearings website.
Bearings - Linear - Ball - Stainless Steel - Closed
Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.
Related Information:
A larger range of Bearings - Linear - Ball - Stainless Steel - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Ball - Stainless Steel - Closed on the Small Parts and Bearings website.
Bearings - Ball - 17-4PH Stainless Steel
Excellent Corrosion and Heat resistance - Hardness is between 300 grades and 400 grades. SUS630 grade.
Standard bearing tolerances. Low load, low speed applications requiring maximum corrosion resistance. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages and shields from AISI 304 Stainless Steel. Balls and races from SUS630 (17-4PH) Stainless Steel.
Related Information:
A larger range of Bearings - Ball - 17-4PH Stainless Steel might be available on the Bearing Shop Online site.
Bearings - Thrust - Ball - Washers Only - Stainless Steel
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Stainless Steel Washers are hardened to HRC38.42.
Related Information:
A larger range of Bearings - Thrust - Ball - Washers Only - Stainless Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Thrust - Ball - Washers Only - Stainless Steel on the Small Parts and Bearings website.
Bearings - Ball - Angular Contact - Chrome Steel
Including miniature sizes down to 8mm from stock and even smaller available.
Single row angular contact ball bearings.
Related Information:
A larger range of Bearings - Ball - Angular Contact - Chrome Steel might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Angular Contact - Chrome Steel on the Small Parts and Bearings website.
Bearings - Conveyor - Hex Bore - Plastic - Double Row
Plastic hex bore conveyor bearings with 316 stainless balls
Loads and Speeds are for reference only. Testing recommended.
A larger range of Bearings - Conveyor - Hex Bore - Plastic - Double Row might be available on the Bearing Shop Online site. There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Double Row on the Small Parts and Bearings website.
Bearings - Ball - Textile Industry
Special Design Stainless and Chrome Steel Bearings for the Textile Industry.
Bearings in this category often have special features. Designed for use in textile industry machinery.
Related Information:
A larger range of Bearings - Ball - Textile Industry might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Textile Industry on the Small Parts and Bearings website.
Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings
Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.
Load and speed calculations are for reference only. Testing is recommended.
Related Information:
A larger range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings might be available on the Bearing Shop Online site. There is also a good range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings on the Small Parts and Bearings website.
Bearings - Linear - Sliding - Stainless - PTFE - Closed
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.
A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Closed might be available on the Bearing Shop Online site. There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Small Parts and Bearings website.
Shafting - Pre Drilled and Tapped - Stainless Steel Steel
For use with rail supports and open linear bearings
A larger range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel might be available on the Bearing Shop Online site. There is also a good range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel on the Small Parts and Bearings website.
Bearings - Ball - Anti Corrosion - Special Stainless
Higher corrosion resistance than 440C stainless - HRC59 Hardness - Same or higher load than 440C
Ideal for applications with salt spray or chemicals in the pH range 3 to 12. ISC CASSTOP design with special TBN-6H stainless steel. Other sizes available on request.
Related Information:
A larger range of Bearings - Ball - Anti Corrosion - Special Stainless might be available on the Bearing Shop Online site. There is also a good range of Bearings - Ball - Anti Corrosion - Special Stainless on the Small Parts and Bearings website.
Gearheads - Inline - Planetary - Size 17 - Precision
Use with NEMA Size 17 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).
Related Information:
There is also a good range of Gearheads - Inline - Planetary - Size 17 - Precision on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Stainless Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Stainless ball and stainless spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Stainless Ball on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 123604 products in 2554 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
