Bar And Rod


Bar and Rod


Bar - H Section - Brass
Bar - H Section - Brass

Also see combined categories:
All Metal Bar - H Section (300mm Long Only)


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bar - H Section - Brass. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Bar - H Section - Brass.

Hexagonal Bar - Brass
Hexagonal Bar - Brass

Also see combined categories:
All Metal Bar - Hexagonal

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Brass.

Rectangular Bar - Aluminium
Rectangular Bar - Aluminium

Also see combined categories:
All Rectangular Bar

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rectangular Bar - Aluminium.

Square Bar - Brass
Square Bar - Brass

Also see combined categories:
All Metal Bar - Square

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Square Bar - Brass. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Square Bar - Brass.

Square Bar - Urethane
Square Bar - Urethane

Also see combined categories:
All Non Metallic Bar - Square

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Square Bar - Urethane.

Hexagonal Bar - 303 Stainless
Hexagonal Bar - 303 Stainless

Also see combined categories:
All Metal Bar - Hexagonal

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Small A/F sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - 303 Stainless.

Hexagonal Bar - Carbon Steel
Hexagonal Bar - Carbon Steel

Also see combined categories:
All Metal Bar - Hexagonal

Saw Cut Ends. Small A/F sizes may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Carbon Steel.

Hexagonal Bar - Titanium Ti-Gr2 - Drawn
Hexagonal Bar - Titanium Ti-Gr2 - Drawn

Also see combined categories:
All Metal Bar - Hexagonal

Cold rolled and hot drawn hex bar to ASTM B348

Saw Cut Ends.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Titanium Ti-Gr2 - Drawn.

Hexagonal Bar - Titanium Ti-Gr2 - Rolled
Hexagonal Bar - Titanium Ti-Gr2 - Rolled

Also see combined categories:
All Metal Bar - Hexagonal

Cold rolled hex bar to ASTM B348

Saw Cut Ends.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hexagonal Bar - Titanium Ti-Gr2 - Rolled.

Tool Steel - 496 Oil Hardening - Flat Stock
Tool Steel - 496 Oil Hardening - Flat Stock

General purpose tool steel with good wear resistance, durability and machinability

Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tool Steel - 496 Oil Hardening - Flat Stock.

Shafting General Purpose


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill Blanks.

Rod - Drill - General
Rod - Drill - General

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.

Related Information:
Hardened Shafting
Silversteel

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - General.

Rod - Drill - A-2 Air Hardening
Rod - Drill - A-2 Air Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - A-2 Air Hardening.

Rod - Drill - O-1 Oil Hardening
Rod - Drill - O-1 Oil Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - O-1 Oil Hardening.

Rod - Drill - Oil Hardening - 480 Series
Rod - Drill - Oil Hardening - 480 Series

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - Oil Hardening - 480 Series.

Rod - Drill - S-7 Air Hardening
Rod - Drill - S-7 Air Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - S-7 Air Hardening.

Rod - Drill - W-1 Water Hardening
Rod - Drill - W-1 Water Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Drill - W-1 Water Hardening.

Shafting - Carbon Steel - Keyed
Shafting - Carbon Steel - Keyed

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Carbon Steel - Keyed.

Shafting - Unground - Silver Steel
Shafting - Unground - Silver Steel

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Unground - Silver Steel.

Bungs


Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:
Rectangular Bungs
Round Bungs

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bungs and Caps - Reversible - Round.

Knobs Ball


Knobs - Ball - Knock On - Phenolic
Knobs - Ball - Knock On - Phenolic

Moulded from black phenolic resin.

Light Weight. Thermal insulating. Non corrosive. POK Type have a ribbed insert. Shaft should be 0 to 0.007 mm undersized for best results. 712 Type suit standard metric rod.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Knock On - Phenolic.

Engineering and Hobby Rod


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Soft Metal Packs. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Soft Metal Packs.

Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Aluminium Properties

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Aluminium. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Aluminium.

Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Brass Properties

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Brass. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Brass.

Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:
Stainless Steel Properties

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rod - Round - Stainless Steel. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod - Round - Stainless Steel.

Square Shaft


Shafting - Linear - Square
Shafting - Linear - Square


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Linear - Square.

Shafting Aluminium


Shafting - Aluminium
Shafting - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Aluminium.

Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:
Frelon Gold Linear Bearings

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Aluminium - Ceramic Coated.

Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:
Frelon Gold Linear Bearings

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Aluminium - Ceramic Coated - Tapped.

Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pipe - Aluminium.

Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Supported - Pre-Drilled - Aluminium.

Shafting Precision Ground


Shafting - Ground - Precision - Chrome Plated
Shafting - Ground - Precision - Chrome Plated

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Case hardened and recommended for use with precision bearings. Ends are not plated.

Case hardened to 60-65 Rockwell C. Chrome plated for corrosion resistance.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Chrome Plated.

Shafting - Ground - Precision - High Carbon Steel
Shafting - Ground - Precision - High Carbon Steel

Also see combined categories:
All Shafting
All Steel Shafting

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - High Carbon Steel.

Shafting - Ground - Precision - Stainless 303 Grade
Shafting - Ground - Precision - Stainless 303 Grade

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 303 Grade.

Shafting - Ground - Precision - Stainless 416 Grade Hardened
Shafting - Ground - Precision - Stainless 416 Grade Hardened

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 416 Grade Hardened.

Shafting - Ground - Precision - Stainless 420 Grade Hardened
Shafting - Ground - Precision - Stainless 420 Grade Hardened

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 420 Grade Hardened.

Shafting - Ground - Precision - Stainless 440C Grade Hardened
Shafting - Ground - Precision - Stainless 440C Grade Hardened

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Stainless 440C Grade Hardened.

Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1
Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1

Also see combined categories:
All Shafting
All Titanium Shafting

CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.

Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1.

Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4
Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4

Also see combined categories:
All Shafting
All Titanium Shafting

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:
Couplings
Shaft Extenders
Bore Reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Ground - Precision - Titanium - Ti-Gr5 - TC4.

Shafting - Pre Drilled and Tapped - High Carbon Steel
Shafting - Pre Drilled and Tapped - High Carbon Steel

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pre Drilled and Tapped - High Carbon Steel.

Shafting - Pre Drilled and Tapped - Stainless Steel Steel
Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafting - Pre Drilled and Tapped - Stainless Steel Steel.

Shafts - Idler
Shafts - Idler

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Related Information:
Tensioners

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Idler.

Shafts - Pinion
Shafts - Pinion


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Pinion.

Shafting General Purpose


Shafts - Flexible - Panel Mount - Cased
Shafts - Flexible - Panel Mount - Cased

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:
Performance Data
Remote Control Nomenclature

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Panel Mount - Cased.

Shafts - Flexible - Panel Mount - Open
Shafts - Flexible - Panel Mount - Open

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:
Performance Data
Remote Control Nomenclature

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Panel Mount - Open.

Flexible Shaft


Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:
Performance Data
Remote Control Nomenclature

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Shafts - Flexible - Coupling Ends - Open - Mild Steel.

Splined Shafts and Bushes


Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel

Also see combined categories:
All Splined Shafts

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Related Information:
Unflanged Stainless Bushes to Suit
Combined Splined Bushes List

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Splined Shafts - Stainless Steel.

Shafting Precision Ground


Rail Supports - Without Shaft
Rail Supports - Without Shaft

Also see combined categories:
All Shaft Supports

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Related Information:
Shafting Predrilled for Supports
Linear Bearing in Housing
Linear Bearings

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Supports - Without Shaft.

Rail Supports - With Shaft
Rail Supports - With Shaft

Also see combined categories:
All Shaft Supports

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Related Information:
Linear Bearing in Housing
Linear Bearings

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Supports - With Shaft.

Rail Supports - With Shaft - One Piece
Rail Supports - With Shaft - One Piece

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Related Information:
Linear Bearing in Housing
Linear Bearings
Frelon Linear Bearings

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rail Supports - With Shaft - One Piece.

Supports - Pedestal Two Bolt
Supports - Pedestal Two Bolt

Also see combined categories:
All Supports

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Supports - Pedestal Two Bolt.

Assortments


Assortment Kits - Various
Assortment Kits - Various

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Assortment Kits - Various. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Assortment Kits - Various.

Collars


Collars - Shaft - Clamp Type - One Piece - Aluminium
Collars - Shaft - Clamp Type - One Piece - Aluminium

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Aluminium.

Collars - Shaft - Clamp Type - One Piece - Stainless Steel
Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Stainless Steel.

Collars - Shaft - Clamp Type - One Piece - Steel
Collars - Shaft - Clamp Type - One Piece - Steel

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Steel.

Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Includes 303 and 304 Grade Stainless

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel.

Collars - Shaft - Clamp Type - Two Piece - Aluminium
Collars - Shaft - Clamp Type - Two Piece - Aluminium

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - Two Piece - Aluminium.

Collars - Shaft - Clamp Type - Two Piece - Steel
Collars - Shaft - Clamp Type - Two Piece - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - Two Piece - Steel.

Collars - Shaft - Gripfast - 304 Stainless Steel
Collars - Shaft - Gripfast - 304 Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Related Information:
Shafting
Similar prodct Fastlock Collars
ABS Plastic Gripfast Collars

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Gripfast - 304 Stainless Steel.

Collars - Shaft - Gripfast - ABS Plastic
Collars - Shaft - Gripfast - ABS Plastic

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Related Information:
Shafting
Similar prodct Fastlock Collars
304 Stainless Gripfast Collars

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Gripfast - ABS Plastic.

Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel.

Collars - Shaft - Hex Bore - One Piece - Steel
Collars - Shaft - Hex Bore - One Piece - Steel

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - One Piece - Steel.

Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel.

Collars - Shaft - Hex Bore - Two Piece - Steel
Collars - Shaft - Hex Bore - Two Piece - Steel

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - Two Piece - Steel.

Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Stainless Steel.

Collars - Shaft - Hinged - Steel
Collars - Shaft - Hinged - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hinged - Steel.

Collars - Shaft - Standard - Nylon
Collars - Shaft - Standard - Nylon

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Standard one piece nylon shaft collar with set screw

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Standard - Nylon.

Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Standard - Stainless Steel.

Collars - Shaft - Standard - Steel
Collars - Shaft - Standard - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Standard - Steel.

Collars - Shaft - With Integral Shim
Collars - Shaft - With Integral Shim

Also see combined categories:
All Round Bore Shaft Collars

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Related Information:
Shafting

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - With Integral Shim.

Shaft Extenders and Reducers


Extenders - Shaft
Extenders - Shaft

Miniature and large shaft extenders and reducers. Used to increase or reduce the diameter, or increase the length of shafts.

Also known as shaft increasers or shaft reducers.

Related Information:
Bore reducers

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Extenders - Shaft.

Rollers


Rollers - Durasoft - Shaft Mount - Black Neoprene
Rollers - Durasoft - Shaft Mount - Black Neoprene

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Durasoft - Shaft Mount - Black Neoprene.

Rollers - Durasoft - Shaft Mount - Coloured Urethane
Rollers - Durasoft - Shaft Mount - Coloured Urethane

Also see combined categories:
All Shaft Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Durasoft - Shaft Mount - Coloured Urethane.

Rollers - Solid - Shaft Mount - Black Neoprene
Rollers - Solid - Shaft Mount - Black Neoprene

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Solid - Shaft Mount - Black Neoprene.

Rollers - Solid - Shaft Mount - Coloured Urethane
Rollers - Solid - Shaft Mount - Coloured Urethane

Also see combined categories:
All Solid Shaft Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Rollers - Solid - Shaft Mount - Coloured Urethane.

Gearbox Output Shafts


Gearboxes - Output Shafts - For E Type Helical Reducers
Gearboxes - Output Shafts - For E Type Helical Reducers

Also see combined categories:
All Gearbox Shafts

For use in Right Angle gearboxes with bores. E Series.

Stainless 303 shaft. Steel keys and circlips. E-X and E-DX types suitable for E type gearboxes (right angle types).

Related Information:
Right Angle Gearboxes

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Output Shafts - For E Type Helical Reducers.

Gearboxes - Output Shafts - For P - PF and FF Type Worm Reducers
Gearboxes - Output Shafts - For P - PF and FF Type Worm Reducers

Also see combined categories:
All Gearbox Shafts

For use in Cross Axis gearboxes with bores. P, PF and FF Series.

Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).

Related Information:
P Type Gearboxes

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Gearboxes - Output Shafts - For P - PF and FF Type Worm Reducers.

Shaft Extenders and Reducers


Reducers - Bore
Reducers - Bore

Inch to Metric / Inch to Inch / Metric to Metric. Brass reducing bushes.

S = Recommended set screw positions. C = Recommended position for single set screw fastening. T = Recommended position for tangential screw in clamp hub.

Related Information:
Shaft Extenders

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Reducers - Bore.

Tensioners


Tensioner - Drive - Single Adjusting - Shaft Mount
Tensioner - Drive - Single Adjusting - Shaft Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Single Adjusting - Shaft Mount.

Clutches


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:
Info Sheet

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clutches - Slip - Magnetic Particle - Integral Shaft - No Power.

Spacers


Spacers - Round - Through Bore - Aluminium
Spacers - Round - Through Bore - Aluminium

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Aluminium


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Round - Through Bore - Aluminium.

Spacers - Round - Through Bore - Brass
Spacers - Round - Through Bore - Brass

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Brass


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Round - Through Bore - Brass.

Spacers - Round - Through Bore - Nylon
Spacers - Round - Through Bore - Nylon

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Shaft spacers - Nylon


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Round - Through Bore - Nylon.

Spacers - Round - Through Bore - Steel
Spacers - Round - Through Bore - Steel

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Round - Through Bore - Steel.

Spacers - Round - Through Bore - Stainless Steel
Spacers - Round - Through Bore - Stainless Steel

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Round - Through Bore - Stainless Steel.

Tensioners


Tensioner - Adjustable Screw
Tensioner - Adjustable Screw

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Adjustable Screw.

Tensioner - Fixed Angle
Tensioner - Fixed Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Fixed Angle.

Tensioner - Fixed Flanged
Tensioner - Fixed Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Fixed Flanged.

Tensioner - Horizontal Mount
Tensioner - Horizontal Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.

Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Horizontal Mount.

Tensioner - Vertical Mount
Tensioner - Vertical Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Vertical Mount.

Tensioner - Drive - Adjustable Angle
Tensioner - Drive - Adjustable Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Adjustable Angle.

Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Drive - Adjustable Flanged.

Linear Bearings


Bearings - Linear - Ball - Closed
Bearings - Linear - Ball - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:
Precision Shafting To Suit Bearings

Clutches


Clutches - Magnetic Particle 24VDC
Clutches - Magnetic Particle 24VDC

Also see combined categories:
All Magnetic Clutches

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Related Information:
Magnetic Particle Clutches Info Sheet

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clutches - Magnetic Particle 24VDC.

Tensioners


Tensioner - Heavy Duty - Type 2
Tensioner - Heavy Duty - Type 2

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90o and is anchored by set screws.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Heavy Duty - Type 2.

Tensioner - Heavy Duty - Type 3
Tensioner - Heavy Duty - Type 3

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Heavy Duty - Type 3.

Tensioner - Heavy Duty - Type 4
Tensioner - Heavy Duty - Type 4

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.

Related Information:
Idler Shafts

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tensioner - Heavy Duty - Type 4.

Bearings Hydrodynamic


Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:
Technical Info
Precision Shafting To Suit Bearings

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Hydrodynamic Pressure.

Bearings Press In


Bearings - Press-Fit - Acetal - SDP
Bearings - Press-Fit - Acetal - SDP

Also see combined categories:
All Press In Bearings

Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.

Related Information:
Precision Shafting To Suit Bearings

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Press-Fit - Acetal - SDP.

Stroke Rotary Bushings


Bushings - Stroke Rotary - Miniature
Bushings - Stroke Rotary - Miniature

Also see combined categories:
All Stroke Rotary Bushings

2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.

Set includes outer ring, ball cage and shaft. Ball Cage: Brass Balls: Hard Steel / Shaft: Hard Steel Outer Ring: Hard Steel. Temperature: +100oC (Constant), +120oC (Maximum). Stroke: = (L1 - Lb) x 2. Supplied with extreme accuracy with zero to minimum preload.

Related Information:
Stroke Rotary Bushings Technical Info

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bushings - Stroke Rotary - Miniature.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  




Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top






Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122770 products in 2709 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.