Miniature Bearings Australia Pty Ltd

Balls Stainless Steel 440c Grade Categories


Balls Metallic


Balls - Stainless Steel - 440C Grade
Balls - Stainless Steel - 440C Grade

Also see combined categories:
All Metallic Balls

Hardness: Rockwell C: 55-60.

Tolerances available on request. AISI440C Stainless Steel.

Related Information:

There is also a good range of Balls - Stainless Steel - 440C Grade on the Small Parts and Bearings website.


You may also be interested in

Rod Ends Stainless Steel


Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female on the Small Parts and Bearings website.


Balls Metallic


Balls - Stainless Steel - 304 Grade
Balls - Stainless Steel - 304 Grade

Also see combined categories:
All Metallic Balls

A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.

Tolerances available on request. Grade 100. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.

Related Information:

There is also a good range of Balls - Stainless Steel - 304 Grade on the Small Parts and Bearings website.


Balls - Stainless Steel - 316 Grade
Balls - Stainless Steel - 316 Grade

Also see combined categories:
All Metallic Balls

A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.

Tolerances available on request. Grade 100. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.

Related Information:

There is also a good range of Balls - Stainless Steel - 316 Grade on the Small Parts and Bearings website.


Balls - Stainless Steel - 316L Grade
Balls - Stainless Steel - 316L Grade

Also see combined categories:
All Metallic Balls

Easier to machine than standard 316 grade.

316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.

Related Information:

There is also a good range of Balls - Stainless Steel - 316L Grade on the Small Parts and Bearings website.


Bearings Stainless Special Grades


Bearings - Ball - AISI304 Stainless Steel
Bearings - Ball - AISI304 Stainless Steel

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Non Hardenable. Quality Japanese manufacture.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm up to 10mm bore, Width +0/- 0.12 mm. Mid range speed and load between 304 stainless and 440C stainless. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:


Bearings - Ball - 316 Stainless Steel - Double Row - Open
Bearings - Ball - 316 Stainless Steel - Double Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Double Row - Open on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.


Knobs Ball


Knobs - Ball - Threaded - Stainless Steel
Knobs - Ball - Threaded - Stainless Steel

Also see combined categories:
All Female Threaded Ball Knobs

303 stainless steel (European grade 1.4305)


Related Information:

There is also a good range of Knobs - Ball - Threaded - Stainless Steel on the Small Parts and Bearings website.


Bearings Stainless Special Grades


Bearings - Ball - 17-4PH Stainless Steel
Bearings - Ball - 17-4PH Stainless Steel

Also see combined categories:
All 300 Grade Stainless Bearings

Excellent Corrosion and Heat resistance - Hardness is between 300 grades and 400 grades. SUS630 grade.

Standard bearing tolerances. Low load, low speed applications requiring maximum corrosion resistance. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages and shields from AISI 304 Stainless Steel. Balls and races from SUS630 (17-4PH) Stainless Steel.

Related Information:


Pins Ball Lock


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle. Also called detent pins.

Positive lock detent pins.

Related Information:

There is also a good range of Pins - Ball Lock - T-Handle - Industrial - Stainless Steel on the Small Parts and Bearings website.


Bearings Stainless Special Grades


Bearings - Ball - Anti Corrosion - Special Stainless
Bearings - Ball - Anti Corrosion - Special Stainless

Also see combined categories:
All 300 Grade Stainless Bearings

Higher corrosion resistance than 440C stainless - HRC59 Hardness - Same or higher load than 440C

Ideal for applications with salt spray or chemicals in the pH range 3 to 12. ISC CASSTOP design with special TBN-6H stainless steel. Other sizes available on request.

Related Information:

There is also a good range of Bearings - Ball - Anti Corrosion - Special Stainless on the Small Parts and Bearings website.


Pins Ball Lock


Pins - Ball Lock - L-Handle - Industrial - Steel
Pins - Ball Lock - L-Handle - Industrial - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Also called detent pins.

Positive lock detent pins.

Related Information:

There is also a good range of Pins - Ball Lock - L-Handle - Industrial - Steel on the Small Parts and Bearings website.


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.

Positive lock detent pins.

Related Information:

There is also a good range of Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium on the Small Parts and Bearings website.


Pins - Ball Lock - Button Handle - Commercial
Pins - Ball Lock - Button Handle - Commercial

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Also called detent pins.

Economical. Positive lock detent pins. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:

There is also a good range of Pins - Ball Lock - Button Handle - Commercial on the Small Parts and Bearings website.


Pins - Ball Lock - T-Handle - Commercial
Pins - Ball Lock - T-Handle - Commercial

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Tee handle. Also called detent pins.

Economical. Positive lock detent pins. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:

There is also a good range of Pins - Ball Lock - T-Handle - Commercial on the Small Parts and Bearings website.


Rod Ends Stainless Steel


Rod Ends - Stainless Steel - Bronze Lined - Male
Rod Ends - Stainless Steel - Bronze Lined - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.

There is also a good range of Rod Ends - Stainless Steel - Bronze Lined - Male on the Small Parts and Bearings website.


Splined Shafts and Bushes


Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel


Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

There is also a good range of Splined Shafts - Stainless Steel on the Small Parts and Bearings website.


Bearings Housings


Housings - Bearing - Pillow Block - Miniature
Housings - Bearing - Pillow Block - Miniature


Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Related Information:

There is also a good range of Housings - Bearing - Pillow Block - Miniature on the Small Parts and Bearings website.


Strip


Strip - Stainless Steel
Strip - Stainless Steel

Also see combined categories:
All Metal Strip

430 Grade stainless steel strip


There is also a good range of Strip - Stainless Steel on the Small Parts and Bearings website.


Pins General


Pins - Clik - Stainless Steel 316 Grade
Pins - Clik - Stainless Steel 316 Grade

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:

There is also a good range of Pins - Clik - Stainless Steel 316 Grade on the Small Parts and Bearings website.


Pins Roll


Pins - Roll - Stainless Steel - 300 Grade
Pins - Roll - Stainless Steel - 300 Grade

Also see combined categories:
All Roll Pins

304 grade DIN1481.


Related Information:

There is also a good range of Pins - Roll - Stainless Steel - 300 Grade on the Small Parts and Bearings website.


Pins - Roll - Stainless Steel - 420 Grade
Pins - Roll - Stainless Steel - 420 Grade

Also see combined categories:
All Roll Pins

420 grade DIN1481.


Related Information:

There is also a good range of Pins - Roll - Stainless Steel - 420 Grade on the Small Parts and Bearings website.


Washers Lock


Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel


There is also a good range of Washers - Lock - Split - Stainless Steel on the Small Parts and Bearings website.


Allthread


Threaded Rod - Allthread - Stainless Steel - 316
Threaded Rod - Allthread - Stainless Steel - 316

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 316 grade. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Stainless Steel - 316 on the Small Parts and Bearings website.


Keys and Keysteel


Keysteel Lengths - Square - Stainless Steel
Keysteel Lengths - Square - Stainless Steel

Also see combined categories:
All Keysteel Lengths

303, 304 and 316 grade key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.

Related Information:

There is also a good range of Keysteel Lengths - Square - Stainless Steel on the Small Parts and Bearings website.


Tooling Balls


Balls - Checking - Stainless Steel
Balls - Checking - Stainless Steel

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Checking - Stainless Steel on the Small Parts and Bearings website.


Balls - Fixture - Stainless Steel
Balls - Fixture - Stainless Steel

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Fixture - Stainless Steel on the Small Parts and Bearings website.


Balls - Checking - Stainless Steel - With Tapped Shank
Balls - Checking - Stainless Steel - With Tapped Shank

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Checking - Stainless Steel - With Tapped Shank on the Small Parts and Bearings website.


Latches Draw


Latches - Draw - Over Centre - 300 Grade Stainless Steel
Latches - Draw - Over Centre - 300 Grade Stainless Steel


Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.

Keepers included. Type SC-97533 has a hole for a padlock.

There is also a good range of Latches - Draw - Over Centre - 300 Grade Stainless Steel on the Small Parts and Bearings website.


Allthread


Threaded Rod - Allthread - Stainless Steel - 304
Threaded Rod - Allthread - Stainless Steel - 304

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Stainless Steel - 304 on the Small Parts and Bearings website.


Washers Flat Metallic


Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:

There is also a good range of Washers - Flat - Stainless Steel 304 - Commercial on the Small Parts and Bearings website.


Washers - Flat - Stainless Steel 316 - Commercial
Washers - Flat - Stainless Steel 316 - Commercial

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:

There is also a good range of Washers - Flat - Stainless Steel 316 - Commercial on the Small Parts and Bearings website.


Couplings Rigid


Couplings - Rigid - 1 Piece Clamp - Stainless Steel
Couplings - Rigid - 1 Piece Clamp - Stainless Steel

Also see combined categories:
All Rigid Couplings

303 Grade Stainless

Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.

There is also a good range of Couplings - Rigid - 1 Piece Clamp - Stainless Steel on the Small Parts and Bearings website.


Mounts Leveling


Mounts - Anti-Vibration - 303 Stainless Steel
Mounts - Anti-Vibration - 303 Stainless Steel


Corrosion resistant designed with high grade nitrile rubber and stainless steel.

Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Related Information:

There is also a good range of Mounts - Anti-Vibration - 303 Stainless Steel on the Small Parts and Bearings website.


Spring Anchors


Anchors - Spring - Stainless Steel
Anchors - Spring - Stainless Steel

Also see combined categories:
All Spring Anchors

An economical way to secure the ends of extension springs, and provide easy adjustment.

300 Grade Stainless Steel.

There is also a good range of Anchors - Spring - Stainless Steel on the Small Parts and Bearings website.


Bearings Single Row Ball


Bearings - Ball - 440C Stainless
Bearings - Ball - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless steel radial ball bearings

Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - 440C Stainless on the Small Parts and Bearings website.


Collars


Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Includes 303 and 304 Grade Stainless


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel on the Small Parts and Bearings website.


Shim


Shim and Foil - Stainless Steel
Shim and Foil - Stainless Steel

Also see combined categories:
All Shim
All Sheet

Precision stainless shim sheet. Very thin foil to thick sizes. Includes 416, 303 and 316 grades.

NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.

Related Information:

There is also a good range of Shim and Foil - Stainless Steel on the Small Parts and Bearings website.


Bearings Flanged Ball


Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Flanged - 440C Stainless on the Small Parts and Bearings website.


Tooling Balls


Balls - Tooling - One Piece - Construction - Stainless Steel
Balls - Tooling - One Piece - Construction - Stainless Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 440C Stainless Steel heat treated to 55-58 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Construction - Stainless Steel on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit on the Small Parts and Bearings website.


Bearings Single Row Ball


Bearings - Ball - WIR - 440C Stainless
Bearings - Ball - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - WIR - 440C Stainless on the Small Parts and Bearings website.


Tooling Balls


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit on the Small Parts and Bearings website.


Bearings Flanged Ball


Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Flanged - WIR - 440C Stainless on the Small Parts and Bearings website.


Spring Assemblies


Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO


Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:

There is also a good range of Spring Assemblies - Small Bracket - RINO on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2554 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2554 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.