Miniature Bearings Australia Pty Ltd

Ball Transfer Units Screw Stem Brass And Aluminium Categories


Ball Transfers


Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.

There is also a good range of Ball Transfer Units - Screw Stem - Brass and Aluminium on the Small Parts and Bearings website.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.

There is also a good range of Ball Transfer Units - Screw Stem - Steel - Precision on the Small Parts and Bearings website.


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Stainless 303 on the Small Parts and Bearings website.


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.


Related Information:

There is also a good range of Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium on the Small Parts and Bearings website.


Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

There is also a good range of Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

There is also a good range of Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

There is also a good range of Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Couplings - Rigid - Set Screw
Couplings - Rigid - Set Screw

Also see combined categories:
All Rigid Couplings

0.35 to 5.1 Nm. Includes steel, stainless steel, brass and aluminium.

Quality Class Precision: Bore Tolerance +0.013 / - 0.000 concentric within 0.0127mm T.I.R. Quality Class Commercial: Bore Tolerance +0.051 / -0.000.

Related Information:

There is also a good range of Couplings - Rigid - Set Screw on the Small Parts and Bearings website.


Pins - Ball Lock - Button Handle - Steel
Pins - Ball Lock - Button Handle - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium. Also called detent pins.


Related Information:

There is also a good range of Pins - Ball Lock - Button Handle - Steel on the Small Parts and Bearings website.


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle. Also called detent pins.


Related Information:

There is also a good range of Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium on the Small Parts and Bearings website.


Pins - Ball Lock - Ring Handle - Industrial - Steel
Pins - Ball Lock - Ring Handle - Industrial - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Related Information:

There is also a good range of Pins - Ball Lock - Ring Handle - Industrial - Steel on the Small Parts and Bearings website.


Ball Transfer Units - Base Mount - Standard - Steel
Ball Transfer Units - Base Mount - Standard - Steel

Also see combined categories:
All Base Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Base Mount - Standard - Steel on the Small Parts and Bearings website.


Ball Transfer Units - Dismantlable - Heavy Duty - Steel
Ball Transfer Units - Dismantlable  - Heavy Duty - Steel

Also see combined categories:
All Push Fit Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Dismantlable - Heavy Duty - Steel on the Small Parts and Bearings website.


Pins - Ball Lock - L-Handle - Industrial - Steel
Pins - Ball Lock - L-Handle - Industrial - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Also called detent pins.


Related Information:

There is also a good range of Pins - Ball Lock - L-Handle - Industrial - Steel on the Small Parts and Bearings website.


Ball Transfer Units - Base Mount - Heavy Duty - Steel
Ball Transfer Units - Base Mount  - Heavy Duty - Steel

Also see combined categories:
All Base Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Base Mount - Heavy Duty - Steel on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Stainless - Deep
Ball Transfer Units - Flange Mount - Standard - Stainless - Deep

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Deep on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Stainless - Slim
Ball Transfer Units - Flange Mount - Standard - Stainless - Slim

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Slim on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Steel - Slim
Ball Transfer Units - Flange Mount - Standard - Steel - Slim

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Steel - Slim on the Small Parts and Bearings website.


Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated


Single ball bearings units for conveyor systems

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

There is also a good range of Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated on the Small Parts and Bearings website.


Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated
Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated

Also see combined categories:
All Push Fit Ball Transfers

Single ball bearings units for conveyor systems

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

There is also a good range of Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated on the Small Parts and Bearings website.


Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 3mm Wide - Through Bore

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:

There is also a good range of Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore
Pulleys - Timing -  1.000mm Pitch - 6mm Wide - Through Bore

Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. With set screw.

Related Information:

There is also a good range of Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Pressed Steel on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated
Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 3mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 2mm Pitch Timing Belts.

Aluminium Alloy. Finished Bores with Set Screws.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. Set Screw and EZI-LOK Hubs.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 9mm Wide - Through Bore

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.

Aluminium Alloy. Set Screw Locking.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 - 15mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.

Aluminium Alloy. Finsihed through bore. Set screw locking.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pins - Ball Lock - L-Handle - Industrial - Stainless Steel
Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Also called detent pins.


Related Information:

There is also a good range of Pins - Ball Lock - L-Handle - Industrial - Stainless Steel on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - HTD -  15mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium Alloy. Finished bore with set screw locking.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore
Pulleys - Timing -  2.500mm Pitch - T2.5 - 6mm Wide - Through Bore

Also see combined categories:
All 2.5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 2.500mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium Alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:

There is also a good range of Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL -  6.4mm Wide - Through Bore

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished bore with set screw locking.

Related Information:

There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 - 15mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 -  9mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Through Bore
Pulleys - Timing -  9.525mm Pitch - L -  19.1mm Wide  - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Through Bore
Pulleys - Timing -  9.525mm Pitch - L -  25.4mm Wide - Through Bore

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.

Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL -  9.5mm Wide - Through Bore

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.

Related Information:

There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 10mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 16mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 25.0mm to 25.4mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.