Ball Joints Categories
Joints - Ball Positioner
For holding parts at an angle up to 45 degrees
Pivots 45 Deg from horizontal in every direction. Tightens at any position by rotating the collar. Has a tapped hole at the top and a male thread at the bottom for securing.
There is also a good range of Joints - Ball Positioner on the Small Parts and Bearings website.
You may also be interested in
Universal Joints Single
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Plain Bore - Stainless on the Small Parts and Bearings website.
Rod Ends Stainless Steel
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female
Also known as Heim Joints
There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male
Also known as Heim Joints
There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female
Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male
Tight fit (Minimal ball clearance). Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male on the Small Parts and Bearings website.
Rod Ends Plastic
Rod Ends - Plastic - Female
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Plastic - Female on the Small Parts and Bearings website.
Rod Ends - Plastic - Male
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Plastic - Male on the Small Parts and Bearings website.
Rod Ends Studded
Rod Ends - Steel - Studded - Quick Disconnect - Female
Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.
There is also a good range of Rod Ends - Steel - Studded - Quick Disconnect - Female on the Small Parts and Bearings website.
Rod Ends PTFE Lined
Rod Ends - Steel - PTFE Lined - Tight Fit - Female
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Female on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Male on the Small Parts and Bearings website.
Rod Ends Stamped
Rod Ends - Steel - Stamped - Female
Economy stamped style combines high strength with low cost. Also known as Heim Joints
Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.
There is also a good range of Rod Ends - Steel - Stamped - Female on the Small Parts and Bearings website.
Joints - Swivel - Double Wing Knob - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Double Wing Knob - Steel on the Small Parts and Bearings website.
Joints - Swivel - Knob Style - Stainless Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.
There is also a good range of Joints - Swivel - Knob Style - Stainless Steel on the Small Parts and Bearings website.
Joints - Swivel - Knob Style - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Knob Style - Steel on the Small Parts and Bearings website.
Joints - Swivel - Miniature - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Miniature - Steel on the Small Parts and Bearings website.
Joints - Swivel - Split Type - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Split Type - Steel on the Small Parts and Bearings website.
Joints - Swivel - Tee Handle - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Tee Handle - Steel on the Small Parts and Bearings website.
Joints - Swivel - Wing Knob - Stainless Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.
There is also a good range of Joints - Swivel - Wing Knob - Stainless Steel on the Small Parts and Bearings website.
Joints - Swivel - Wing Knob - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Wing Knob - Steel on the Small Parts and Bearings website.
Joints - Clevis - Plastic
Use with plastic rod ends - Includes pin and clip. See also yokes.
Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.
There is also a good range of Joints - Clevis - Plastic on the Small Parts and Bearings website.
Joints - Tee - Tubing and Rod
Inexpensive nylon joiners for hobby tubing and rod
There is also a good range of Joints - Tee - Tubing and Rod on the Small Parts and Bearings website.
Universal Joints - Double Joint - Hobby
C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.
There is also a good range of Universal Joints - Double Joint - Hobby on the Small Parts and Bearings website.
Universal Joints - Single Joint - High Speed - Bored and Keyed
Carbon Steel. With keyway. Maximum operating angle 25 to 45 degrees (refer tables).
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Bored and Keyed on the Small Parts and Bearings website.
Universal Joints - Single Joint - High Speed - Plain Bore
Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Plain Bore on the Small Parts and Bearings website.
Universal Joints - Single Joint - High Speed - Solid
Carbon Steel. Unbored. Maximum operating angle 25 to 45 degrees (refer tables).
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Solid on the Small Parts and Bearings website.
Universal Joints - Telescoping - Plastic - Brass Spider and Insert
Acetal plastic telescoping universal joints with nickle plated brass spiders and bore inserts
There is also a good range of Universal Joints - Telescoping - Plastic - Brass Spider and Insert on the Small Parts and Bearings website.
Rod Ends - Steel - Nylon Raceway - Female
Also known as Heim Joints
There is also a good range of Rod Ends - Steel - Nylon Raceway - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Nylon Raceway - Male
Also known as Heim Joints
There is also a good range of Rod Ends - Steel - Nylon Raceway - Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel - Bronze Lined - Male
Also known as Heim Joints
Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.
There is also a good range of Rod Ends - Stainless Steel - Bronze Lined - Male on the Small Parts and Bearings website.
Yoke Ends - Threaded
Linkage Connectors
Drop forged steel machined to SAE standards. Also see clevis joints.
Related Information:
There is also a good range of Yoke Ends - Threaded on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Female
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Female on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Male
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Steel - Bronze Lined - Male on the Small Parts and Bearings website.
Washers - Disc Spring - Flange Locking Type
Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.
The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.
There is also a good range of Washers - Disc Spring - Flange Locking Type on the Small Parts and Bearings website.
Yoke Ends - Blank
Linkage Connectors with blank ends - no hole
Drop forged steel machined to SAE standards. Also see clevis joints.
Related Information:
There is also a good range of Yoke Ends - Blank on the Small Parts and Bearings website.
Balls - Ceramic - Ruby - Synthetic
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Specific Gravity: 3.98.
Related Information:
There is also a good range of Balls - Ceramic - Ruby - Synthetic on the Small Parts and Bearings website.
Balls - Ceramic - Sapphire - Synthetic
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).
Related Information:
There is also a good range of Balls - Ceramic - Sapphire - Synthetic on the Small Parts and Bearings website.
Balls - Ceramic - Silicon Nitride
Outstanding wear resistance. Good thermal and chemical resistance.
High hardness. Grades shown are AFBMA / ISO3290-1. High strength over a wide temperature range. High fracture toughness. Outstanding wear resistance. Good thermal and chemical resistance.
Related Information:
There is also a good range of Balls - Ceramic - Silicon Nitride on the Small Parts and Bearings website.
Balls - Ceramic - Zirconia
Outstanding wear resistance. Excellent thermal and chemical resistance.
Grades shown are AFBMA / ISO3290-1.
Related Information:
There is also a good range of Balls - Ceramic - Zirconia on the Small Parts and Bearings website.
Balls - Chrome Steel
Hardness: Rockwell C: 60-70.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. SAE 52100 Chrome Steel. Hardness: Rockwell C: 60-70. Specific Gravity: 7.833.
Related Information:
There is also a good range of Balls - Chrome Steel on the Small Parts and Bearings website.
Balls - Phosphor Bronze
Specific Gravity 8.4
Grades shown are AFBMA / ISO3290-1.
Related Information:
There is also a good range of Balls - Phosphor Bronze on the Small Parts and Bearings website.
Balls - Stainless Steel - 304 Grade
A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.
Related Information:
There is also a good range of Balls - Stainless Steel - 304 Grade on the Small Parts and Bearings website.
Balls - Stainless Steel - 316 Grade
A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.
Related Information:
There is also a good range of Balls - Stainless Steel - 316 Grade on the Small Parts and Bearings website.
Balls - Stainless Steel - 316L Grade
Easier to machine than standard 316 grade.
316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.
Related Information:
There is also a good range of Balls - Stainless Steel - 316L Grade on the Small Parts and Bearings website.
Balls - Stainless Steel - 400 Grade
Hardness: Rockwell C: 55-60. Includes 420 and 440C grades
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. AISI440C Stainless Steel.
Related Information:
There is also a good range of Balls - Stainless Steel - 400 Grade on the Small Parts and Bearings website.
Balls - Steel - Bored
Bored steel balls as used in steel rod ends.
Hardness: 58-64 Rc. Material: SUJ-2.
Related Information:
There is also a good range of Balls - Steel - Bored on the Small Parts and Bearings website.
Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI
Implant Grade can be used for Jewellery and Body Piercing. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.
Precision Grade: 200. Grades shown are AFBMA / ISO3290-1. Plain. Composition Percentage: Al 5.5-6.5, V 3.5-4.5, N 0.03, C 0.08, H 0.013, Fe 0.25, O 0.13, Ti Balance. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI on the Small Parts and Bearings website.
Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded
Implant Grade can be used for Jewellery and Body Piercing. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.
Precision Grade: 200. Grades shown are AFBMA / ISO3290-1. Plain. Composition Percentage: Al 5.5-6.5, V 3.5-4.5, N 0.03, C 0.08, H 0.013, Fe 0.25, O 0.13, Ti Balance. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent. Threaded either 1-72 UNF or M1.2.
Related Information:
There is also a good range of Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded on the Small Parts and Bearings website.
Balls - Tungsten Carbide
Extreme hardness and wear resistance.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Precision Grade: Grade 25. Hardness: Rockwell A: 91.5 (Approx 77 Rockwell C). Extreme hardness and wear resistance. Specific Gravity: 14.95.
Related Information:
There is also a good range of Balls - Tungsten Carbide on the Small Parts and Bearings website.
Balls - Plastic - Acetal
High intensity strength, rigidity, outstanding resistance to abrasion and most solvents.
Tolerances available on request. Acetal Copolymer. High intensity strength, rigidity, outstanding resistance to abrasion and most solvents. Standard Opaque White. Specific Gravity: 1.4.
Related Information:
There is also a good range of Balls - Plastic - Acetal on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Downloadable PDF Catalogue Acetal Bearings
Downloadable PDF Catalogue Ball Lock Pins
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Circlips
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Dowel Pins
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue Hammer Drive Pins
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Key Steel
Downloadable PDF Catalogue Knobs
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue O-Rings
Downloadable PDF Catalogue Pins
Downloadable PDF Catalogue Poly Vee Belts and Pulleys
Downloadable PDF Catalogue Precision Shim Washers
Downloadable PDF Catalogue Rod & Tube
Downloadable PDF Catalogue Roll Pins
Downloadable PDF Catalogue Shaft Collars
Downloadable PDF Catalogue Shim Sheet
Downloadable PDF Catalogue Shoulder Screws
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Socket Set Screws
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Spring Steel Strip
Downloadable PDF Catalogue Springs
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Taper Pins
Downloadable PDF Catalogue Thmb Screws and Nuts
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Catalogue Timing Belts
Downloadable PDF Catalogue Timing Pulley Stock
Downloadable PDF Catalogue Timing Pulleys
Downloadable PDF Catalogue Vibration Mounts
Downloadable PDF Catalogue Washers
Downloadable PDF Catalogue Wave Washers
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Anderton Circlips
Downloadable PDF Cross Reference Barden Bearings
Downloadable PDF Cross Reference Essentra
Downloadable PDF Cross Reference Flocast
Downloadable PDF Cross Reference K&S Metals
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference Nordex
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Seeger Circlips
Downloadable PDF Cross Reference Small Parts Inc
Downloadable PDF Cross Reference Timing Belts and Pulleys
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 126985 products in 2166 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
