Backup Rings Categories
Rings - Backup
Durometer 90 Nitrile Rubber back up rings.
There is also a good range of Rings - Backup on the Small Parts and Bearings website.
Rings - Retaining - C Type External - For Linear Bearings
Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.
There is also a good range of Rings - Retaining - C Type External - For Linear Bearings on the Small Parts and Bearings website.
Rings - Retaining - PR Type Internal - For Linear Bearings
Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.
There is also a good range of Rings - Retaining - PR Type Internal - For Linear Bearings on the Small Parts and Bearings website.
Rings - Split - Stainless Steel
316 stainless steel wire rings.
There is also a good range of Rings - Split - Stainless Steel on the Small Parts and Bearings website.
Rings - Split - Zinc Plated Steel
Zinc plated hard drawn steel wire rings.
There is also a good range of Rings - Split - Zinc Plated Steel on the Small Parts and Bearings website.
Rings - Crescent
Variation of an E-Clip with an open face. Also known as a C-Clip.
Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.
Related Information:
There is also a good range of Rings - Crescent on the Small Parts and Bearings website.
Rings - D - Nickel Plated
Nickel plated D Rings
There is also a good range of Rings - D - Nickel Plated on the Small Parts and Bearings website.
Rings - Round - Nickel Plated
Nickel plated round rings
There is also a good range of Rings - Round - Nickel Plated on the Small Parts and Bearings website.
Rings - Tolerance
Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.
Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.
There is also a good range of Rings - Tolerance on the Small Parts and Bearings website.
Spiral Rings - External - Heavy Duty
AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.
There is also a good range of Spiral Rings - External - Heavy Duty on the Small Parts and Bearings website.
Spiral Rings - External - Medium Duty
AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.
There is also a good range of Spiral Rings - External - Medium Duty on the Small Parts and Bearings website.
Spiral Rings - External - Medium-Heavy Duty
AME / WST / RST - Spring Steel and Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST.
There is also a good range of Spiral Rings - External - Medium-Heavy Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Heavy Duty
Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.
There is also a good range of Spiral Rings - Internal - Heavy Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Light Duty
Includes series CI / VH / UR - Spring Steel and Stainless Steel.
Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.
There is also a good range of Spiral Rings - Internal - Light Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Medium Duty
Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.
There is also a good range of Spiral Rings - Internal - Medium Duty on the Small Parts and Bearings website.
Spiral Rings - Internal - Medium-Heavy Duty
Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.
There is also a good range of Spiral Rings - Internal - Medium-Heavy Duty on the Small Parts and Bearings website.
Snap Rings - External - Basic
Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.
Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment.
There is also a good range of Snap Rings - External - Basic on the Small Parts and Bearings website.
Snap Rings - External - Stainless Steel
Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.
301 S11/S22 Stainless Steel. Used on the outside diameter of a bearing, shaft or similar equipment.
Snap Rings - Internal - Basic
M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.
Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.
There is also a good range of Snap Rings - Internal - Basic on the Small Parts and Bearings website.
Snap Rings - Internal - Stainless Steel
Internal snaprings are similar to an internal circlip without the lugs
301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.
There is also a good range of Snap Rings - Internal - Stainless Steel on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic
Steel body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic on the Small Parts and Bearings website.
Magnets - Alnico - Ring
Cast Alnico 5
There is also a good range of Magnets - Alnico - Ring on the Small Parts and Bearings website.
Magnets - Ceramic Ring
There is also a good range of Magnets - Ceramic Ring on the Small Parts and Bearings website.
Castors - Stud - Friction Ring - General Purpose - Swivel
There is also a good range of Castors - Stud - Friction Ring - General Purpose - Swivel on the Small Parts and Bearings website.
Push In Retaining Rings - Carbon Steel
Thrust load shown is calculated for ideal conditions with mild steel bore.
There is also a good range of Push In Retaining Rings - Carbon Steel on the Small Parts and Bearings website.
Push On Retaining Rings - Carbon Steel
M1465 / DTX / Seeger ZA and KS.
Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.
There is also a good range of Push On Retaining Rings - Carbon Steel on the Small Parts and Bearings website.
Push On Retaining Rings - Stainless Steel
Rotor Clip TY. Stainless Steel hardness HR15N 82.5-86
PH 15-7/17-7 Stainless Steel and 1.4310 Stainless Steel.
There is also a good range of Push On Retaining Rings - Stainless Steel on the Small Parts and Bearings website.
Plungers - Spring - Pull Ring - Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Pull Ring - Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Pull Ring - Locking - Steel-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Pull Ring - Locking - Steel-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Pull Ring - Non Locking - Steel-Acetal on the Small Parts and Bearings website.
Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel
17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.
Positive lock detent pins. Aluminium handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel on the Small Parts and Bearings website.
Washers - Bevel
For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.
Malleable iron with black finish.
There is also a good range of Washers - Bevel on the Small Parts and Bearings website.
Bearings - Needle Roller - Inner Rings
Hardened sleeves for needle roller bearings.
Related Information:
There is also a good range of Bearings - Needle Roller - Inner Rings on the Small Parts and Bearings website.
Bearings - Ball - With Snap Ring - Chrome Steel
Chrome Steel Bearings with a Snap Ring on the OD
Single row radial ball bearings with snap ring. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
There is also a good range of Bearings - Ball - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - With Snap Ring Groove Only - Chrome Steel
Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.
Single row radial ball bearings with snap ring groove. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
There is also a good range of Bearings - Ball - With Snap Ring Groove Only - Chrome Steel on the Small Parts and Bearings website.
Shock Absorbers - Hydraulic - Lock Rings
There is also a good range of Shock Absorbers - Hydraulic - Lock Rings on the Small Parts and Bearings website.
Bearings - Ball - WIR - With Snap Ring - Chrome Steel
Chrome Steel Bearings with a Snap Ring on the OD
Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
There is also a good range of Bearings - Ball - WIR - With Snap Ring - Chrome Steel on the Small Parts and Bearings website.
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.
Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel on the Small Parts and Bearings website.
Pins - Ball Lock - Shoulder Type - Ring Handle
Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle.
Positive lock detent pins. Carbon steel components.
Related Information:
There is also a good range of Pins - Ball Lock - Shoulder Type - Ring Handle on the Small Parts and Bearings website.
Bearings - Needle Roller - Machined - With Inner Ring
Related Information:
There is also a good range of Bearings - Needle Roller - Machined - With Inner Ring on the Small Parts and Bearings website.
Bearings - Needle Roller - Machined - Without Inner Ring
Related Information:
There is also a good range of Bearings - Needle Roller - Machined - Without Inner Ring on the Small Parts and Bearings website.
Pins - Ball Lock - Marine Style - Half Ring
Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.
Positive lock detent pins. 303 Stainless shanks and heads. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
There is also a good range of Pins - Ball Lock - Marine Style - Half Ring on the Small Parts and Bearings website.
E-Clips - Klipring
Also known as Poodle Rings - Imperial - N1504 / NKP
There is also a good range of E-Clips - Klipring on the Small Parts and Bearings website.
Pins - Clik - Carbon Steel
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.
Related Information:
There is also a good range of Pins - Clik - Carbon Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125355 products in 2309 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
