Miniature Bearings Australia Pty Ltd

ANGLE CATEGORIES


Angle - Brass
Angle - Brass


Brass angle is great for small hobby projects like building scale models or dioramas.

This category may be available in the new MBA online store at Angle - Brass.

There is also a good range of Angle - Brass on the Small Parts and Bearings website.


You may also be interested in

Tensioners


Tensioner - Drive - Adjustable Angle
Tensioner - Drive - Adjustable Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.

Idler shaft and pulleys not included with tensioner. This category may be available in the new MBA online store at Tensioner - Drive - Adjustable Angle.

Related Information:

There is also a good range of Tensioner - Drive - Adjustable Angle on the Small Parts and Bearings website.


Dental Handpiece Parts


E4R Slow Speed - Contra Angle Green Band NSK Parts
E4R Slow Speed - Contra Angle Green Band NSK Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of E4R Slow Speed - Contra Angle Green Band NSK Parts on the Small Parts and Bearings website.


Ball Joints


Joints - Ball Positioner
Joints - Ball Positioner


For holding parts at an angle up to 45 degrees

Pivots 45 Deg from horizontal in every direction. Tightens at any position by rotating the collar. Has a tapped hole at the top and a male thread at the bottom for securing. This category may be available in the new MBA online store at Joints - Ball Positioner.

There is also a good range of Joints - Ball Positioner on the Small Parts and Bearings website.


Gears Inch Racks


Gear Racks - 12DP - Steel
Gear Racks - 12DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

12 DP. Approx 6.65mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 12DP - Steel.

There is also a good range of Gear Racks - 12DP - Steel on the Small Parts and Bearings website.


Gear Racks - 16DP - Plastic
Gear Racks - 16DP - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Plastic.

There is also a good range of Gear Racks - 16DP - Plastic on the Small Parts and Bearings website.


Gear Racks - 16DP - Steel
Gear Racks - 16DP - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 16DP - Steel.

There is also a good range of Gear Racks - 16DP - Steel on the Small Parts and Bearings website.


Gear Racks - 32DP - Stainless Steel
Gear Racks - 32DP - Stainless Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - Stainless Steel.

There is also a good range of Gear Racks - 32DP - Stainless Steel on the Small Parts and Bearings website.


Gears Metric Racks


Gear Racks - Module 0.3 - Brass
Gear Racks - Module 0.3 - Brass

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.3 - Brass.

There is also a good range of Gear Racks - Module 0.3 - Brass on the Small Parts and Bearings website.


Gear Racks - Module 0.5 - Brass
Gear Racks - Module 0.5 - Brass

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.5 - Brass.

There is also a good range of Gear Racks - Module 0.5 - Brass on the Small Parts and Bearings website.


Gear Racks - Module 0.5 - Plastic
Gear Racks - Module 0.5 - Plastic

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.5 - Plastic.

There is also a good range of Gear Racks - Module 0.5 - Plastic on the Small Parts and Bearings website.


Gear Racks - Module 0.5 - Stainless
Gear Racks - Module 0.5 - Stainless

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.5 - Stainless.

There is also a good range of Gear Racks - Module 0.5 - Stainless on the Small Parts and Bearings website.


Gear Racks - Module 0.75 - Brass
Gear Racks - Module 0.75 - Brass

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.75 - Brass.

There is also a good range of Gear Racks - Module 0.75 - Brass on the Small Parts and Bearings website.


Gear Racks - Module 0.8 - Brass
Gear Racks - Module 0.8 - Brass

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.8 - Brass.

There is also a good range of Gear Racks - Module 0.8 - Brass on the Small Parts and Bearings website.


Gear Racks - Module 0.8 - Plastic
Gear Racks - Module 0.8 - Plastic

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.8 - Plastic.

There is also a good range of Gear Racks - Module 0.8 - Plastic on the Small Parts and Bearings website.


Gear Racks - Module 0.8 - Stainless
Gear Racks - Module 0.8 - Stainless

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 0.8 - Stainless.

There is also a good range of Gear Racks - Module 0.8 - Stainless on the Small Parts and Bearings website.


Gear Racks - Module 1.5 - Plastic
Gear Racks - Module 1.5 - Plastic

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Acetal and Nylon.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 1.5 - Plastic.

There is also a good range of Gear Racks - Module 1.5 - Plastic on the Small Parts and Bearings website.


Gear Racks - Module 1.5 - Stainless
Gear Racks - Module 1.5 - Stainless

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 1.5 - Stainless.

There is also a good range of Gear Racks - Module 1.5 - Stainless on the Small Parts and Bearings website.


Gear Racks - Module 1.5 - Steel
Gear Racks - Module 1.5 - Steel

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Carbon Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 1.5 - Steel.

There is also a good range of Gear Racks - Module 1.5 - Steel on the Small Parts and Bearings website.


Gear Racks - Module 1 - Plastic
Gear Racks - Module 1 - Plastic

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 1 - Plastic.

There is also a good range of Gear Racks - Module 1 - Plastic on the Small Parts and Bearings website.


Gear Racks - Module 1 - Stainless
Gear Racks - Module 1 - Stainless

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 1 - Stainless.

There is also a good range of Gear Racks - Module 1 - Stainless on the Small Parts and Bearings website.


Gear Racks - Module 1 - Steel
Gear Racks - Module 1 - Steel

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Carbon Steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 1 - Steel.

There is also a good range of Gear Racks - Module 1 - Steel on the Small Parts and Bearings website.


Gear Racks - Module 2.5 - Plastic
Gear Racks - Module 2.5 - Plastic

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 2.5 - Plastic.

There is also a good range of Gear Racks - Module 2.5 - Plastic on the Small Parts and Bearings website.


Gear Racks - Module 2.5 - Stainless
Gear Racks - Module 2.5 - Stainless

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 2.5 - Stainless.

There is also a good range of Gear Racks - Module 2.5 - Stainless on the Small Parts and Bearings website.


Gear Racks - Module 2.5 - Steel
Gear Racks - Module 2.5 - Steel

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 2.5 - Steel.

There is also a good range of Gear Racks - Module 2.5 - Steel on the Small Parts and Bearings website.


Gear Racks - Module 2 - Plastic
Gear Racks - Module 2 - Plastic

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Acetal and nylon.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 2 - Plastic.

There is also a good range of Gear Racks - Module 2 - Plastic on the Small Parts and Bearings website.


Gear Racks - Module 2 - Stainless
Gear Racks - Module 2 - Stainless

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 2 - Stainless.

There is also a good range of Gear Racks - Module 2 - Stainless on the Small Parts and Bearings website.


Gear Racks - Module 2 - Steel
Gear Racks - Module 2 - Steel

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 2 - Steel.

There is also a good range of Gear Racks - Module 2 - Steel on the Small Parts and Bearings website.


Gear Racks - Module 3 - Plastic
Gear Racks - Module 3 - Plastic

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 3 - Plastic.

There is also a good range of Gear Racks - Module 3 - Plastic on the Small Parts and Bearings website.


Gear Racks - Module 3 - Stainless
Gear Racks - Module 3 - Stainless

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Stainless Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 3 - Stainless.

There is also a good range of Gear Racks - Module 3 - Stainless on the Small Parts and Bearings website.


Gear Racks - Module 3 - Steel
Gear Racks - Module 3 - Steel

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20 Degree Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - Module 3 - Steel.

There is also a good range of Gear Racks - Module 3 - Steel on the Small Parts and Bearings website.


Springs Torsion


Springs - Torsion - Left Hand Wound
Springs - Torsion - Left Hand Wound

Also see combined categories:
All Torsion Springs

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length. This category may be available in the new MBA online store at Springs - Torsion - Left Hand Wound.

Related Information:

There is also a good range of Springs - Torsion - Left Hand Wound on the Small Parts and Bearings website.


Springs - Torsion - Right Hand Wound
Springs - Torsion - Right Hand Wound

Also see combined categories:
All Torsion Springs

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length. This category may be available in the new MBA online store at Springs - Torsion - Right Hand Wound.

Related Information:

There is also a good range of Springs - Torsion - Right Hand Wound on the Small Parts and Bearings website.


Gears Inch Racks


Gear Racks - 10DP - 14.5 PA - Steel
Gear Racks - 10DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 10 DP. Approx 7.98mm between teeth. This category may be available in the new MBA online store at Gear Racks - 10DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 10DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 20DP - 14.5 PA - Steel
Gear Racks - 20DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 20 DP. Approx 3.99mm between teeth. This category may be available in the new MBA online store at Gear Racks - 20DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 20DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 24DP - 14.5 PA - Plastic
Gear Racks - 24DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - 14.5 PA - Plastic.

There is also a good range of Gear Racks - 24DP - 14.5 PA - Plastic on the Small Parts and Bearings website.


Gear Racks - 24DP - Stainless - Standard - Standard
Gear Racks - 24DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 24DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 24DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gear Racks - 32DP - 14.5 PA - Plastic
Gear Racks - 32DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 32DP - 14.5 PA - Plastic.

There is also a good range of Gear Racks - 32DP - 14.5 PA - Plastic on the Small Parts and Bearings website.


Gear Racks - 48DP - 14.5 PA - Plastic
Gear Racks - 48DP - 14.5 PA - Plastic

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - 14.5 PA - Plastic.

There is also a good range of Gear Racks - 48DP - 14.5 PA - Plastic on the Small Parts and Bearings website.


Gear Racks - 48DP - Stainless - Standard - Standard
Gear Racks - 48DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at Gear Racks - 48DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 48DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gear Racks - 64DP - Stainless - Standard - Standard
Gear Racks - 64DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. This category may be available in the new MBA online store at Gear Racks - 64DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 64DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gear Racks - 6DP - 14.5 PA - Steel
Gear Racks - 6DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 6 DP. Approx 13.3mm between teeth. This category may be available in the new MBA online store at Gear Racks - 6DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 6DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 8DP - 14.5 PA - Steel
Gear Racks - 8DP - 14.5 PA - Steel

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5 Degree Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 8 DP. Approx 9.98mm between teeth. This category may be available in the new MBA online store at Gear Racks - 8DP - 14.5 PA - Steel.

There is also a good range of Gear Racks - 8DP - 14.5 PA - Steel on the Small Parts and Bearings website.


Gear Racks - 96DP - Stainless - Side Holes
Gear Racks - 96DP - Stainless - Side Holes

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at Gear Racks - 96DP - Stainless - Side Holes.

There is also a good range of Gear Racks - 96DP - Stainless - Side Holes on the Small Parts and Bearings website.


Gear Racks - 96DP - Stainless - Standard - Standard
Gear Racks - 96DP - Stainless - Standard - Standard

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20 Degree Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 96 DP. Approx 0.83mm between teeth. This category may be available in the new MBA online store at Gear Racks - 96DP - Stainless - Standard - Standard.

There is also a good range of Gear Racks - 96DP - Stainless - Standard - Standard on the Small Parts and Bearings website.


Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - Module 1 - Plastic.

Related Information:

There is also a good range of Gears - Bevel - Module 1 - Plastic on the Small Parts and Bearings website.


Gears - Bevel - 32 Diametrical Pitch - Plastic
Gears - Bevel - 32 Diametrical Pitch - Plastic

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. This category may be available in the new MBA online store at Gears - Bevel - 32 Diametrical Pitch - Plastic.

Related Information:

There is also a good range of Gears - Bevel - 32 Diametrical Pitch - Plastic on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227579 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227579 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.