Miniature Bearings Australia Pty Ltd

Tape Fiberglass Ptfe Coated Categories


Tape


Tape - Fiberglass - PTFE Coated
Tape - Fiberglass - PTFE Coated

Also see combined categories:
All Tape

Heat Sealer Tape

Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 oC to 260 oC (-100 to 500 Deg F). Less than 5 percent elongation.

There is also a good range of Tape - Fiberglass - PTFE Coated on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - GT2 - 25mm Wide
Belts - Timing -  5.000mm Pitch - GT2 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - GT2 - 25mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.000mm Pitch - GT2 - Clean - 6mm Wide
Belts - Timing -  2.000mm Pitch - GT2 - Clean - 6mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - Clean - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL - Clean - 3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs comliant.

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide on the Small Parts and Bearings website.


Washers - Flat - PTFE
Washers - Flat - PTFE

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Teflon Washers


Related Information:

There is also a good range of Washers - Flat - PTFE on the Small Parts and Bearings website.


Balls - Plastic - PTFE
Balls - Plastic -  PTFE

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

No water absorption. Temperatures up to 288 Deg C.

Tolerances available on request. Not affected by any known acids or alkalies. No water absorption. Temperatures up to 288 oC. Unpolished. Specific Gravity: 2.3.

Related Information:

There is also a good range of Balls - Plastic - PTFE on the Small Parts and Bearings website.


Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Also see combined categories:
All Press In Bearings

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Related Information:

There is also a good range of Bearings - SDP - PTFE Filled Acetal - Flange Mounted on the Small Parts and Bearings website.


Rod - Round - PTFE
Rod - Round - PTFE

Also see combined categories:
All Plastic Rod

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - PTFE on the Small Parts and Bearings website.


Rod Ends - Steel - PTFE Lined - Tight Fit - Female
Rod Ends - Steel - PTFE Lined - Tight Fit - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Female on the Small Parts and Bearings website.


Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Rod Ends - Steel - PTFE Lined - Tight Fit - Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Male on the Small Parts and Bearings website.


Bushes - Stainless Steel and PTFE - Flanged
Bushes - Stainless Steel and PTFE - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Stainless Steel and PTFE - Flanged on the Small Parts and Bearings website.


Bushes - Stainless Steel and PTFE - Unflanged
Bushes - Stainless Steel and PTFE - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Stainless Steel and PTFE - Unflanged on the Small Parts and Bearings website.


Rod Ends - Steel - Studded - PTFE Seat - Female
Rod Ends - Steel - Studded - PTFE Seat - Female

Also see combined categories:
All Female Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

There is also a good range of Rod Ends - Steel - Studded - PTFE Seat - Female on the Small Parts and Bearings website.


Rod Ends - Steel - Studded - PTFE Seat - Male
Rod Ends - Steel - Studded - PTFE Seat - Male

Also see combined categories:
All Male Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

There is also a good range of Rod Ends - Steel - Studded - PTFE Seat - Male on the Small Parts and Bearings website.


Bearings - Linear - Sliding - Stainless - PTFE - Closed
Bearings - Linear - Sliding - Stainless - PTFE - Closed

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Small Parts and Bearings website.


Bearings - Linear - Sliding - Stainless - PTFE - Open
Bearings - Linear - Sliding - Stainless - PTFE - Open

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

There is also a good range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp
Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted high temperature PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp
Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted low temperature PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard
Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard on the Small Parts and Bearings website.


Housings - Pillow Block - Self Aligning - Low Temp - PTFE Bronze
Housings - Pillow Block - Self Aligning - Low Temp - PTFE Bronze

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with low temperature PTFE bronze

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:

There is also a good range of Housings - Pillow Block - Self Aligning - Low Temp - PTFE Bronze on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male
Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male on the Small Parts and Bearings website.


Housings - Flange Mount - Non Aligning - Bronze
Housings - Flange Mount - Non Aligning - Bronze

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile flange mounted PTFE bronze bearings

See links at bottom of web page for more information.

Related Information:

There is also a good range of Housings - Flange Mount - Non Aligning - Bronze on the Small Parts and Bearings website.


Lubricants - General
Lubricants - General


Various brands and types. Includes Inox, Lanox, Anti-Seize, Cutting Fluid, Chain Lube, Moly Lube, Food Grade Grease, PTFE Lubes, Silicone and more

Some items in this category are marked as only available for collection. Includes high temperature and food grade lubes. Battery Conditioner - Oils - Moisture Inhibitor - WD - Valve and Oring Lubricant.

There is also a good range of Lubricants - General on the Small Parts and Bearings website.


Bearings - Press-Fit - Acetal - SDP
Bearings - Press-Fit - Acetal - SDP

Also see combined categories:
All Press In Bearings

Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.

Related Information:

There is also a good range of Bearings - Press-Fit - Acetal - SDP on the Small Parts and Bearings website.


Bearings - Ceramic ZRO2- Angular Contact
Bearings - Ceramic ZRO2- Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZRO2- Angular Contact on the Small Parts and Bearings website.


Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Steel - DU - Split - Flanged on the Small Parts and Bearings website.


Bushes - Steel - DU - Split - Unflanged
Bushes - Steel - DU - Split - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Steel - DU - Split - Unflanged on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Radial on the Small Parts and Bearings website.


Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic Si3N4 - Angular Contact on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Small Parts and Bearings website.


Bushes - Plastic - Rulon J - Flanged
Bushes - Plastic - Rulon J - Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.

Related Information:

There is also a good range of Bushes - Plastic - Rulon J - Flanged on the Small Parts and Bearings website.


Bushes - Plastic - Rulon J - Unflanged
Bushes - Plastic - Rulon J - Unflanged

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

Max Load: 5.2 MPa (750 psi). Gold colour. Max surface speed: 2m/s. Max PV: 0.26 (Mpa x m/s)

Non Metallic Bushes. Excellent insulator. Nor suitable for steam or wet conditions. Not FDA compliant. Suitable for dry conditions or vacuum. 288 oC (550 Deg F) Maximum Working Temperature. Patented all polymeric PTFE compound which operates well against soft mating surfaces. Lowest co-efficient of friction in the Rulon(R) product range.

Related Information:

There is also a good range of Bushes - Plastic - Rulon J - Unflanged on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT2 - 12mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT2 - 12mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT2 - 12mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT2 - 20mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT2 - 20mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT2 - 20mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT2 - 30mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT2 - 30mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT2 - 30mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT2 - 50mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT2 - 50mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT2 - 50mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - GT2 - 85mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT2 - 85mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide.

Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - GT2 - 85mm Wide - Taperlock on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock on the Small Parts and Bearings website.


Bushings - Taperlock
Bushings - Taperlock



There is also a good range of Bushings - Taperlock on the Small Parts and Bearings website.


Bearings - Tapered Roller - Cone
Bearings - Tapered Roller - Cone


Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.


There is also a good range of Bearings - Tapered Roller - Cone on the Small Parts and Bearings website.


Bearings - Tapered Roller - Cup
Bearings - Tapered Roller - Cup


Replacements for existing tapered roller cups (outer part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.


There is also a good range of Bearings - Tapered Roller - Cup on the Small Parts and Bearings website.


Sleeves - Tapered - Precision Indexing Plunger
Sleeves - Tapered - Precision Indexing Plunger

Also see combined categories:
All Sleeves for Plungers

Use with precision indexing plungers and locking bolts


There is also a good range of Sleeves - Tapered - Precision Indexing Plunger on the Small Parts and Bearings website.


Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel
Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

Threaded externally for easy extraction.

Related Information:

There is also a good range of Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel on the Small Parts and Bearings website.


Pins - Taper - Imperial - Miniature - Carbon Steel
Pins - Taper - Imperial - Miniature - Carbon Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.


Related Information:

There is also a good range of Pins - Taper - Imperial - Miniature - Carbon Steel on the Small Parts and Bearings website.


Pins - Taper - Imperial - Miniature - Stainless Steel
Pins - Taper - Imperial - Miniature - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.


Related Information:

There is also a good range of Pins - Taper - Imperial - Miniature - Stainless Steel on the Small Parts and Bearings website.


Pins - Taper - Imperial - Standard - Carbon Steel
Pins - Taper - Imperial - Standard - Carbon Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.


Related Information:

There is also a good range of Pins - Taper - Imperial - Standard - Carbon Steel on the Small Parts and Bearings website.


Pins - Taper - Imperial - Standard - Stainless Steel
Pins - Taper - Imperial - Standard - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.


Related Information:

There is also a good range of Pins - Taper - Imperial - Standard - Stainless Steel on the Small Parts and Bearings website.


Pins - Taper - Metric - Carbon Steel
Pins - Taper - Metric - Carbon Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50

Metric Sizes to DIN 1.

Related Information:

There is also a good range of Pins - Taper - Metric - Carbon Steel on the Small Parts and Bearings website.


Pins - Taper - Metric - Extractable - Internal Thread
Pins - Taper - Metric - Extractable - Internal Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded internally for easy extraction.

DIN 7978. Mild Steel.

Related Information:

There is also a good range of Pins - Taper - Metric - Extractable - Internal Thread on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123609 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123609 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.