Miniature Bearings Australia Pty Ltd

Rings Split Zinc Plated Steel Categories


Clamping Rings


Rings - Split - Zinc Plated Steel
Rings - Split - Zinc Plated Steel

Also see combined categories:
All Split Rings

Zinc plated hard drawn steel wire rings.


There is also a good range of Rings - Split - Zinc Plated Steel on the Small Parts and Bearings website.


Pins - Split - Zinc Plated
Pins - Split - Zinc Plated

Also see combined categories:
All Split Pins

Split pins.

Hole size indicated is maximum for the pin to be effective. If the pin you require is not available, you may be able to use the next larger diameter so long as the pin is smaller than your hole size. Longer lengths may be cut back to a suitable length.

Related Information:

There is also a good range of Pins - Split - Zinc Plated on the Small Parts and Bearings website.


Washers - Lock - Split - Steel
Washers - Lock - Split - Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

Plain and zinc plated

Dimensions are nominal and may vary between batches.

There is also a good range of Washers - Lock - Split - Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Zinc Plated
Circlips - External - Standard - Zinc Plated

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel.

Related Information:

There is also a good range of Circlips - External - Standard - Zinc Plated on the Small Parts and Bearings website.


Hooks - Rope Rings - Recessed
Hooks - Rope Rings - Recessed


Zinc plated


There is also a good range of Hooks - Rope Rings - Recessed on the Small Parts and Bearings website.


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Zinc Plated on the Small Parts and Bearings website.


Pins - Ball Lock - Shoulder Type - Ring Handle
Pins - Ball Lock - Shoulder Type - Ring Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Also called detent pins.

Positive lock detent pins.

Related Information:

There is also a good range of Pins - Ball Lock - Shoulder Type - Ring Handle on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated on the Small Parts and Bearings website.


Springs - Drawbar - Zinc Plated
Springs - Drawbar - Zinc Plated

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Related Information:

There is also a good range of Springs - Drawbar - Zinc Plated on the Small Parts and Bearings website.


Tie Downs - D-Ring - Plated Steel
Tie Downs - D-Ring - Plated Steel

Also see combined categories:
All D Ring Tie Downs

Zinc plated steel with 6.35mm mounting holes. Ultimate load 660 kg.


There is also a good range of Tie Downs - D-Ring - Plated Steel on the Small Parts and Bearings website.


Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated


Single ball bearings units for conveyor systems

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

There is also a good range of Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated on the Small Parts and Bearings website.


Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated
Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated

Also see combined categories:
All Push Fit Ball Transfers

Single ball bearings units for conveyor systems

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

There is also a good range of Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated on the Small Parts and Bearings website.


Washers - Spring - 2 Wave Type - Zinc Plated
Washers - Spring - 2 Wave Type - Zinc Plated

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.


There is also a good range of Washers - Spring - 2 Wave Type - Zinc Plated on the Small Parts and Bearings website.


Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Also see combined categories:
All Split Rings

316 stainless steel wire rings.


There is also a good range of Rings - Split - Stainless Steel on the Small Parts and Bearings website.


Pins - Roll - Zinc Plated
Pins - Roll - Zinc Plated

Also see combined categories:
All Roll Pins

Zinc plated spring steel DIN1481.


Related Information:

There is also a good range of Pins - Roll - Zinc Plated on the Small Parts and Bearings website.


Springs - Extension - Stainless Steel
Springs - Extension - Stainless Steel

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:

There is also a good range of Springs - Extension - Stainless Steel on the Small Parts and Bearings website.


Pins - Clik - Carbon Steel
Pins - Clik - Carbon Steel

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:

There is also a good range of Pins - Clik - Carbon Steel on the Small Parts and Bearings website.


Pins - Clik - Mild Steel
Pins - Clik - Mild Steel

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:

There is also a good range of Pins - Clik - Mild Steel on the Small Parts and Bearings website.


Springs - Extension - Music Wire
Springs - Extension - Music Wire

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:

There is also a good range of Springs - Extension - Music Wire on the Small Parts and Bearings website.


Pins - Clik - Stainless Steel 316 Grade
Pins - Clik - Stainless Steel 316 Grade

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:

There is also a good range of Pins - Clik - Stainless Steel 316 Grade on the Small Parts and Bearings website.


Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Also see combined categories:
All Press In Bearings

Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.

Related Information:

There is also a good range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated
Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Zinc Plated on the Small Parts and Bearings website.


U Bolts Steel
U Bolts Steel


Zinc plated carbon steel with steel nuts included


There is also a good range of U Bolts Steel on the Small Parts and Bearings website.


Mounts - Anti-Vibration - Zinc Plated Steel
Mounts - Anti-Vibration - Zinc Plated Steel


Designed with high grade nitrile rubber and zinc plated steel.

Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Related Information:

There is also a good range of Mounts - Anti-Vibration - Zinc Plated Steel on the Small Parts and Bearings website.


Screws - Cap - Socket - Zinc Plated
Screws - Cap - Socket - Zinc Plated

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

There is also a good range of Screws - Cap - Socket - Zinc Plated on the Small Parts and Bearings website.


Keysteel Lengths - Rectangular - Zinc Plated
Keysteel Lengths - Rectangular - Zinc Plated

Also see combined categories:
All Keysteel Lengths

Zinc plated carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.

Related Information:

There is also a good range of Keysteel Lengths - Rectangular - Zinc Plated on the Small Parts and Bearings website.


Keysteel Lengths - Square - Zinc Plated
Keysteel Lengths - Square - Zinc Plated

Also see combined categories:
All Keysteel Lengths

Zinc plated carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.

Related Information:

There is also a good range of Keysteel Lengths - Square - Zinc Plated on the Small Parts and Bearings website.


Pins - Clevis - Zinc Plated
Pins - Clevis - Zinc Plated

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Made from low carbon steel.

Related Information:

There is also a good range of Pins - Clevis - Zinc Plated on the Small Parts and Bearings website.


Washers - Nord Lock - Zinc Plated
Washers - Nord Lock - Zinc Plated

Also see combined categories:
All Serrated Locking Washers
All Lock Washers

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Related Information:

There is also a good range of Washers - Nord Lock - Zinc Plated on the Small Parts and Bearings website.


Threaded Rod - Allthread - Steel - Zinc Plated
Threaded Rod - Allthread - Steel - Zinc Plated

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - BSW. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Steel - Zinc Plated on the Small Parts and Bearings website.


Screws - Countersunk - Socket - Steel - Zinc Plated
Screws - Countersunk - Socket - Steel - Zinc Plated

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

There is also a good range of Screws - Countersunk - Socket - Steel - Zinc Plated on the Small Parts and Bearings website.


Screws - Hex Head - Steel - Zinc Plated
Screws - Hex Head - Steel - Zinc Plated

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Bolts


Related Information:

There is also a good range of Screws - Hex Head - Steel - Zinc Plated on the Small Parts and Bearings website.


Screws - Hex Head - Steel - Zinc Plated - Full Thread
Screws - Hex Head - Steel - Zinc Plated - Full Thread

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Set Screws


Related Information:

There is also a good range of Screws - Hex Head - Steel - Zinc Plated - Full Thread on the Small Parts and Bearings website.


Handles - Tee
Handles - Tee


Zinc plated steel 7.94mm (5/16in.) square shank.


There is also a good range of Handles - Tee on the Small Parts and Bearings website.


Snaps - Steel Wire - Bit
Snaps - Steel Wire - Bit


Zinc Plated


There is also a good range of Snaps - Steel Wire - Bit on the Small Parts and Bearings website.


Nuts - Wing - Steel
Nuts - Wing - Steel

Also see combined categories:
All Nuts
All Wing Nuts

Zinc Plated Wing Nuts - A Pattern B18.17


Related Information:

There is also a good range of Nuts - Wing - Steel on the Small Parts and Bearings website.


Keys - Woodruff - Zinc Plated
Keys - Woodruff - Zinc Plated

Also see combined categories:
All Woodruff Keys


Related Information:

There is also a good range of Keys - Woodruff - Zinc Plated on the Small Parts and Bearings website.


Rings - D - Nickel Plated
Rings - D - Nickel Plated


Nickel plated D Rings


There is also a good range of Rings - D - Nickel Plated on the Small Parts and Bearings website.


Rings - Round - Nickel Plated
Rings - Round - Nickel Plated


Nickel plated round rings


There is also a good range of Rings - Round - Nickel Plated on the Small Parts and Bearings website.


Screws - Self Tapping - Pan Head - Zinc Plated
Screws - Self Tapping - Pan Head - Zinc Plated

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.

There is also a good range of Screws - Self Tapping - Pan Head - Zinc Plated on the Small Parts and Bearings website.


Snaps - Steel Wire - Open Swivel
Snaps - Steel Wire - Open Swivel


Zinc Plated


There is also a good range of Snaps - Steel Wire - Open Swivel on the Small Parts and Bearings website.


Tie Downs - Round - With Spacer
Tie Downs - Round - With Spacer


Zinc plated steel with plastic spacer. Ultimate load 530kg.


There is also a good range of Tie Downs - Round - With Spacer on the Small Parts and Bearings website.


Keys - Gib Head - Zinc Plated
Keys - Gib Head - Zinc Plated

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).

Related Information:

There is also a good range of Keys - Gib Head - Zinc Plated on the Small Parts and Bearings website.


Screws - Button - Socket - Zinc Plated
Screws - Button - Socket - Zinc Plated

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:

There is also a good range of Screws - Button - Socket - Zinc Plated on the Small Parts and Bearings website.


Screws - Security - Socket - Countersunk - Zinc Plated
Screws - Security - Socket - Countersunk - Zinc Plated

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:

There is also a good range of Screws - Security - Socket - Countersunk - Zinc Plated on the Small Parts and Bearings website.


Nuts - Dome - Steel
Nuts - Dome - Steel

Also see combined categories:
All Nuts

Mild Steel, chrome and zinc plated


There is also a good range of Nuts - Dome - Steel on the Small Parts and Bearings website.


Screws - Self Tapping - Countersunk - Philips - Zinc Plated
Screws - Self Tapping - Countersunk - Philips - Zinc Plated

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.

There is also a good range of Screws - Self Tapping - Countersunk - Philips - Zinc Plated on the Small Parts and Bearings website.


Hooks - S - Steel
Hooks - S - Steel

Also see combined categories:
All S Hooks

Low carbon cold drawn steel with zinc plated finish

Any deviations such as angular lifts, shock loads, modifications will result in drastically reduced maximum loads.

There is also a good range of Hooks - S - Steel on the Small Parts and Bearings website.


Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916
Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:

There is also a good range of Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916 on the Small Parts and Bearings website.


Nuts - Hexagonal - Steel
Nuts - Hexagonal - Steel

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC. Plain and Zinc Plated.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

There is also a good range of Nuts - Hexagonal - Steel on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123609 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123609 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.