Miniature Bearings Australia Pty Ltd

R Clips Single Coil Stainless Steel Categories


Clips


R Clips - Single Coil - Stainless Steel
R Clips - Single Coil - Stainless Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins


There is also a good range of R Clips - Single Coil - Stainless Steel on the Small Parts and Bearings website.


R Clips - Single Coil - Steel
R Clips - Single Coil - Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins


There is also a good range of R Clips - Single Coil - Steel on the Small Parts and Bearings website.


You may also be interested in

Bearings Stainless Special Grades


Bearings - Ball - 316 Stainless Steel - Single Row - Open
Bearings - Ball - 316 Stainless Steel - Single Row - Open

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.


Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.


Pins Clevis


Pins - Clevis - Stainless Steel 304
Pins - Clevis - Stainless Steel 304

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings


Related Information:

There is also a good range of Pins - Clevis - Stainless Steel 304 on the Small Parts and Bearings website.


Pins - Clevis - Stainless Steel 316
Pins - Clevis - Stainless Steel 316

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings


Related Information:

There is also a good range of Pins - Clevis - Stainless Steel 316 on the Small Parts and Bearings website.


Bearings Conveyor


Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended.

There is also a good range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row on the Small Parts and Bearings website.


Bearings Acetal Plastic


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

There is also a good range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.


Bearings Single Row Ball


Bearings - Ball - 440C Stainless
Bearings - Ball - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless steel radial ball bearings

Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - 440C Stainless on the Small Parts and Bearings website.


R Clips - Double Coil - Steel
R Clips - Double Coil - Steel

Also see combined categories:
All R Clips

Also known as internal hitch pins, bridge pins or humpback pins


There is also a good range of R Clips - Double Coil - Steel on the Small Parts and Bearings website.


Bearings - Ball - WIR - 440C Stainless
Bearings - Ball - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - WIR - 440C Stainless on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Stainless Ball
Pins - Side Thrust - Single Sided - Stainless Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Stainless Ball on the Small Parts and Bearings website.


Bearings - Ball - High Precision - 440C Stainless
Bearings - Ball - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

There is also a good range of Bearings - Ball - High Precision - 440C Stainless on the Small Parts and Bearings website.


Chain - Roller - Metal - Simplex - Links - Stainless Steel
Chain - Roller - Metal - Simplex - Links - Stainless Steel

Also see combined categories:
All Roller Chain Links

Includes Miniature Sizes. Single row.


Related Information:

There is also a good range of Chain - Roller - Metal - Simplex - Links - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - Flanged - 440C Stainless
Bearings - Ball - Flanged - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Flanged - 440C Stainless on the Small Parts and Bearings website.


Bearings - Ball - WIR - High Precision - 440C Stainless
Bearings - Ball - WIR - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Extended Inner Ring Bearings

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

There is also a good range of Bearings - Ball - WIR - High Precision - 440C Stainless on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel
Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Heavy Duty - Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - 440C Stainless
Bearings - Ball - Flanged - WIR - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Flanged - WIR - 440C Stainless on the Small Parts and Bearings website.


Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.


Bearings - Ball - Flanged - High Precision - 440C Stainless
Bearings - Ball - Flanged - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

There is also a good range of Bearings - Ball - Flanged - High Precision - 440C Stainless on the Small Parts and Bearings website.


Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless
Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Flanged Ball Bearings with Extended Inner

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:

There is also a good range of Bearings - Ball - Flanged - WIR - High Precision - 440C Stainless on the Small Parts and Bearings website.


Snap Rings - Internal - Stainless Steel
Snap Rings - Internal - Stainless Steel

Also see combined categories:
All Internal Snaprings

Internal snaprings are similar to an internal circlip without the lugs

301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.

There is also a good range of Snap Rings - Internal - Stainless Steel on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Plastic Ball
Pins - Side Thrust - Single Sided - Plastic Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Plastic ball and stainless spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Plastic Ball on the Small Parts and Bearings website.


Pins - Coiled - Stainless Steel - Heavy Duty
Pins - Coiled - Stainless Steel - Heavy Duty

Also see combined categories:
All Coiled Pins

Spirol Pins. Coiled roll pin.


Related Information:

There is also a good range of Pins - Coiled - Stainless Steel - Heavy Duty on the Small Parts and Bearings website.


Pins - Coiled - Stainless Steel - Standard Duty
Pins - Coiled - Stainless Steel - Standard Duty

Also see combined categories:
All Coiled Pins

Spirol Pins. Coiled roll pin.


Related Information:

There is also a good range of Pins - Coiled - Stainless Steel - Standard Duty on the Small Parts and Bearings website.


E-Clips - Basic - Stainless Steel
E-Clips - Basic - Stainless Steel

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Stainless Steel PH15-7.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip.

Related Information:

There is also a good range of E-Clips - Basic - Stainless Steel on the Small Parts and Bearings website.


Attachments - Wire Rope Clips - Stainless Steel
Attachments - Wire Rope Clips - Stainless Steel

Also see combined categories:
All Wire Rope Clips

304 Stainless Steel

Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.

There is also a good range of Attachments - Wire Rope Clips - Stainless Steel on the Small Parts and Bearings website.


Push On Retaining Rings - Stainless Steel
Push On Retaining Rings - Stainless Steel

Also see combined categories:
All Push On Rings

Rotor Clip TY. Stainless Steel hardness HR15N 82.5-86

PH 15-7/17-7 Stainless Steel and 1.4310 Stainless Steel.

There is also a good range of Push On Retaining Rings - Stainless Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Stainless Steel
Circlips - External - Standard - Stainless Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel.

Related Information:

There is also a good range of Circlips - External - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel. Tolerances on request. Standard and heavy duty options.

Related Information:

There is also a good range of Circlips - Internal - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - External - Inverted
Circlips - External - Inverted

Also see combined categories:
All External Circlips

N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips.

Related Information:

There is also a good range of Circlips - External - Inverted on the Small Parts and Bearings website.


Springs - Constant Force
Springs - Constant Force


301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Related Information:

There is also a good range of Springs - Constant Force on the Small Parts and Bearings website.


Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

There is also a good range of Gearheads - Inline - Planetary - Size 17 - Precision on the Small Parts and Bearings website.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.

There is also a good range of Ball Transfer Units - Screw Stem - Steel - Precision on the Small Parts and Bearings website.


Bearings - Ball - Economy - 440C Stainless
Bearings - Ball - Economy - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Economy Bearings

Taiwanese or Italian Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Related Information:

There is also a good range of Bearings - Ball - Economy - 440C Stainless on the Small Parts and Bearings website.


Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.


Related Information:

There is also a good range of Universal Joints - Single Joint - High Speed - Plain Bore - Stainless on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Stainless - Deep
Ball Transfer Units - Flange Mount - Standard - Stainless - Deep

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Deep on the Small Parts and Bearings website.


Ball Transfer Units - Flange Mount - Standard - Stainless - Slim
Ball Transfer Units - Flange Mount - Standard - Stainless - Slim

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


There is also a good range of Ball Transfer Units - Flange Mount - Standard - Stainless - Slim on the Small Parts and Bearings website.


Bearings - Ball - Angular Contact - Flanged - 440C Stainless
Bearings - Ball - Angular Contact - Flanged - 440C Stainless

Also see combined categories:
All Angular Contact Bearings

Single row angular contact ball bearings with flanges.

Related Information:

There is also a good range of Bearings - Ball - Angular Contact - Flanged - 440C Stainless on the Small Parts and Bearings website.


Pins - Split - Stainless Steel
Pins - Split - Stainless Steel

Also see combined categories:
All Split Pins

Split pins.

Hole size indicated is maximum for the pin to be effective. If the pin you require is not available, you may be able to use the next larger diameter so long as the pin is smaller than your hole size. Longer lengths may be cut back to a suitable length.

Related Information:

There is also a good range of Pins - Split - Stainless Steel on the Small Parts and Bearings website.


Pins - Clik - Stainless Steel 316 Grade
Pins - Clik - Stainless Steel 316 Grade

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:

There is also a good range of Pins - Clik - Stainless Steel 316 Grade on the Small Parts and Bearings website.


Pins - Roll - Stainless Steel - 300 Grade
Pins - Roll - Stainless Steel - 300 Grade

Also see combined categories:
All Roll Pins

304 grade DIN1481.


Related Information:

There is also a good range of Pins - Roll - Stainless Steel - 300 Grade on the Small Parts and Bearings website.


Pins - Roll - Stainless Steel - 420 Grade
Pins - Roll - Stainless Steel - 420 Grade

Also see combined categories:
All Roll Pins

420 grade DIN1481.


Related Information:

There is also a good range of Pins - Roll - Stainless Steel - 420 Grade on the Small Parts and Bearings website.


Pins - Taper - Metric - Stainless Steel
Pins - Taper - Metric - Stainless Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50

Metric Sizes to DIN 1.

Related Information:

There is also a good range of Pins - Taper - Metric - Stainless Steel on the Small Parts and Bearings website.


Balls - Stainless Steel - 304 Grade
Balls - Stainless Steel - 304 Grade

Also see combined categories:
All Metallic Balls

A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.

Tolerances available on request. Grade 100. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.

Related Information:

There is also a good range of Balls - Stainless Steel - 304 Grade on the Small Parts and Bearings website.


Balls - Stainless Steel - 316 Grade
Balls - Stainless Steel - 316 Grade

Also see combined categories:
All Metallic Balls

A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.

Tolerances available on request. Grade 100. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.

Related Information:

There is also a good range of Balls - Stainless Steel - 316 Grade on the Small Parts and Bearings website.


Balls - Stainless Steel - 316L Grade
Balls - Stainless Steel - 316L Grade

Also see combined categories:
All Metallic Balls

Easier to machine than standard 316 grade.

316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.

Related Information:

There is also a good range of Balls - Stainless Steel - 316L Grade on the Small Parts and Bearings website.


Balls - Stainless Steel - 440C Grade
Balls - Stainless Steel - 440C Grade

Also see combined categories:
All Metallic Balls

Hardness: Rockwell C: 55-60.

Tolerances available on request. AISI440C Stainless Steel.

Related Information:

There is also a good range of Balls - Stainless Steel - 440C Grade on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2554 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2554 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.