Miniature Bearings Australia Pty Ltd

Covid-19 Update!! Current supply status.

Trading by online order and email.
Outbound Deliveries: Allow a few extra days within Australia and extra 7 days for overseas deliveries.
Pre-orders and Backorders: Allow extra 7 days due to quarantine precautions.
Distributors: Most MBA distributors are open and able to contact us using the distributor phone line.

Hospitals, medical equipment repairs and manufacture and bio research teams please email us if you need emergency contacts for equipment spare parts.

Inserts Self Tapping For Wood Slotted Drive Short Categories


Thread Inserts


Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Short on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Slotted Drive
Inserts - Self Tapping - For Wood - Slotted Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Hex Drive
Inserts - Self Tapping - For Wood - Hex Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Flanged on the Small Parts and Bearings website.


Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:

There is also a good range of Inserts - Self Tapping - For Plastics - Steel on the Small Parts and Bearings website.


Inserts - Self Tapping - For Plastics - Stainless Steel
Inserts - Self Tapping - For Plastics - Stainless Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Standard made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:

There is also a good range of Inserts - Self Tapping - For Plastics - Stainless Steel on the Small Parts and Bearings website.


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Stainless 303 on the Small Parts and Bearings website.


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.


Tools - Installation - For Self Tapping Inserts

Also see combined categories:
All Tools

Installation tools for self tapping thread inserts - see the linked inserts categories


Related Information:

There is also a good range of Tools - Installation - For Self Tapping Inserts on the Small Parts and Bearings website.


Screws - Self Drilling - Pan Head
Screws - Self Drilling - Pan Head

Also see combined categories:
All Self Drilling Screws

Zinc chromate fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.


There is also a good range of Screws - Self Drilling - Pan Head on the Small Parts and Bearings website.


Screws - Self Drilling - Hex Washer Head
Screws - Self Drilling - Hex Washer Head

Also see combined categories:
All Self Drilling Screws

Zinc chromate. Fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.


There is also a good range of Screws - Self Drilling - Hex Washer Head on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking Starter Sets
Inserts - Thread Repair - Keylocking Starter Sets

Also see combined categories:
All Keylocking Inserts and Kits

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel. Installation is by drilling out the old thread, countersinking, tapping new thread with a standard tap, screwing the insert until slightly below the surface, then tapping down the keys using the tool supplied and a hammer.

Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking Starter Sets on the Small Parts and Bearings website.


Shims - Slotted - Imperial Sizes
Shims - Slotted - Imperial Sizes

Also see combined categories:
All Slotted Shim

Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.


There is also a good range of Shims - Slotted - Imperial Sizes on the Small Parts and Bearings website.


Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts.

There is also a good range of Screws - Shoulder - Slotted Head - Stainless on the Small Parts and Bearings website.


Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Screws - Shoulder - Slotted Shallow Head - Carbon Steel

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.

There is also a good range of Screws - Shoulder - Slotted Shallow Head - Carbon Steel on the Small Parts and Bearings website.


Screws - Shoulder - Slotted Shallow Head - Stainless
Screws - Shoulder - Slotted Shallow Head - Stainless

Also see combined categories:
All Shoulder Screws


There is also a good range of Screws - Shoulder - Slotted Shallow Head - Stainless on the Small Parts and Bearings website.


Screws - Countersunk - Brass - Slotted
Screws - Countersunk - Brass - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk METRIC and BSW

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - Brass - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - Nylon - Slotted
Screws - Countersunk - Nylon - Slotted

Also see combined categories:
All Countersunk Screws
All Plastic Countersunk Screws

Flat Head Countersunk UNC and UNF.

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Countersunk - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - Steel - Slotted
Screws - Countersunk - Steel - Slotted

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - BA - METRIC

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - Steel - Slotted on the Small Parts and Bearings website.


Screws - Hex Head Slotted - Nylon
Screws - Hex Head Slotted - Nylon

Also see combined categories:
All Hex Head Screws
All Plastic Screws

UNC - UNF


Related Information:

There is also a good range of Screws - Hex Head Slotted - Nylon on the Small Parts and Bearings website.


Screws - Fillister Head - Brass - Slotted
Screws - Fillister Head - Brass - Slotted

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BA and METRIC

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Fillister Head - Brass - Slotted on the Small Parts and Bearings website.


Screws - Fillister Head - Nylon - Slotted
Screws - Fillister Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF. Cheese head

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Fillister Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Fillister Head - Steel - Slotted
Screws - Fillister Head - Steel - Slotted

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Fillister Head - Steel - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - 304 Stainless - Slotted
Screws - Countersunk - 304 Stainless - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - 304 Stainless - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - 316 Stainless - Slotted
Screws - Countersunk - 316 Stainless - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - 316 Stainless - Slotted on the Small Parts and Bearings website.


Screws - Binder Head - Nylon - Slotted
Screws - Binder Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC and UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Binder Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Pan Head - Brass - Slotted
Screws - Pan Head - Brass - Slotted

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws METRIC

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Pan Head - Brass - Slotted on the Small Parts and Bearings website.


Screws - Pan Head - Nylon - Slotted
Screws - Pan Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - Metric

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Pan Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Pan Head - Steel - Slotted
Screws - Pan Head - Steel - Slotted

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Pan Head - Steel - Slotted on the Small Parts and Bearings website.


Screws - Round Head - Brass - Slotted
Screws - Round Head - Brass - Slotted

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BSW - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Round Head - Brass - Slotted on the Small Parts and Bearings website.


Screws - Round Head - Nylon - Slotted
Screws - Round Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Round Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Round Head - Steel - Slotted
Screws - Round Head - Steel - Slotted

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Round Head - Steel - Slotted on the Small Parts and Bearings website.


Screws - Fillister Head - 304 Stainless - Slotted
Screws - Fillister Head - 304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:

There is also a good range of Screws - Fillister Head - 304 Stainless - Slotted on the Small Parts and Bearings website.


Screws - Fillister Head - 316 Stainless - Slotted
Screws - Fillister Head - 316 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:

There is also a good range of Screws - Fillister Head - 316 Stainless - Slotted on the Small Parts and Bearings website.


Screws - Round Head - 304 Stainless - Slotted
Screws - Round Head - 304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Round Head - 304 Stainless - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - Oval Top - 304 Stainless - Slotted
Screws - Countersunk - Oval Top - 304 Stainless - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Countersunk - Oval Top - 304 Stainless - Slotted on the Small Parts and Bearings website.


Screws - Pan Head - 303-304 Stainless - Slotted
Screws - Pan Head - 303-304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:

There is also a good range of Screws - Pan Head - 303-304 Stainless - Slotted on the Small Parts and Bearings website.


Screws - Self Tapping - Countersunk - Philips - 304 Stainless
Screws - Self Tapping - Countersunk - Philips - 304 Stainless

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.

There is also a good range of Screws - Self Tapping - Countersunk - Philips - 304 Stainless on the Small Parts and Bearings website.


Screws - Self Tapping - Countersunk - Philips - 316 Stainless
Screws - Self Tapping - Countersunk - Philips - 316 Stainless

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.

There is also a good range of Screws - Self Tapping - Countersunk - Philips - 316 Stainless on the Small Parts and Bearings website.


Screws - Self Tapping - Countersunk - Philips - Black Oxide
Screws - Self Tapping - Countersunk - Philips - Black Oxide

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.

There is also a good range of Screws - Self Tapping - Countersunk - Philips - Black Oxide on the Small Parts and Bearings website.


Screws - Self Tapping - Countersunk - Philips - Zinc Plated
Screws - Self Tapping - Countersunk - Philips - Zinc Plated

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.

There is also a good range of Screws - Self Tapping - Countersunk - Philips - Zinc Plated on the Small Parts and Bearings website.


Screws - Self Tapping - Countersunk - Undercut Head
Screws - Self Tapping - Countersunk - Undercut Head

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.

There is also a good range of Screws - Self Tapping - Countersunk - Undercut Head on the Small Parts and Bearings website.


Screws - Self Tapping - For Hard or Soft Plastics - Pan Head
Screws - Self Tapping - For Hard or Soft Plastics - Pan Head

Also see combined categories:
All Self Tapping Screws
All Self Tapping Screws for Plastics

Tri-Lobe Course Thread Plastic Threading Screws

Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.

There is also a good range of Screws - Self Tapping - For Hard or Soft Plastics - Pan Head on the Small Parts and Bearings website.


Screws - Self Tapping - For Soft Plastics - Pan Head
Screws - Self Tapping - For Soft Plastics - Pan Head

Also see combined categories:
All Self Tapping Screws
All Self Tapping Screws for Plastics

Tri-Lobe Course Thread Plastic Threading Screws

Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.

There is also a good range of Screws - Self Tapping - For Soft Plastics - Pan Head on the Small Parts and Bearings website.


Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.

There is also a good range of Screws - Self Tapping - Pan Head - 302 - 304 Stainless on the Small Parts and Bearings website.


Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.

There is also a good range of Screws - Self Tapping - Pan Head - 316 Stainless on the Small Parts and Bearings website.


Screws - Self Tapping - Pan Head - Steel - Black Oxide
Screws - Self Tapping - Pan Head - Steel - Black Oxide

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.

There is also a good range of Screws - Self Tapping - Pan Head - Steel - Black Oxide on the Small Parts and Bearings website.


Screws - Self Tapping - Pan Head - Zinc Plated
Screws - Self Tapping - Pan Head - Zinc Plated

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.

There is also a good range of Screws - Self Tapping - Pan Head - Zinc Plated on the Small Parts and Bearings website.


Nuts - Hexagonal - Nylon - Self Tapping
Nuts - Hexagonal - Nylon - Self Tapping

Also see combined categories:
All Nuts

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

There is also a good range of Nuts - Hexagonal - Nylon - Self Tapping on the Small Parts and Bearings website.


Screws - Self Drilling - Hex Head - With Washers
Screws - Self Drilling - Hex Head - With Washers

Also see combined categories:
All Self Drilling Screws

With bonded neoprene washer. Galvanised for corrosion resistance.


There is also a good range of Screws - Self Drilling - Hex Head - With Washers on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 125205 products in 2455 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 125205 products in 2455 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.