Miniature Bearings Australia Pty Ltd

Couplings Rigid 1 Piece Clamp Steel Categories


Couplings Rigid


Couplings - Rigid - 1 Piece Clamp - Steel
Couplings - Rigid - 1 Piece Clamp - Steel


12L14 Steel


There is also a good range of Couplings - Rigid - 1 Piece Clamp - Steel on the Small Parts and Bearings website.


Couplings - Rigid - 2 Piece Clamp - Steel
Couplings - Rigid - 2 Piece Clamp - Steel

Also see combined categories:
All Rigid Couplings

12L14 Steel

Precision Machined. High torsional load. Non marring, easy to install and adjust. Assemble without moving shafts. Use on hardened shafts, rigid clamp type design, easily machinable. Black finish with alloy steel cap screws. Available with stepped bores and keyways on 5 week delivery.

There is also a good range of Couplings - Rigid - 2 Piece Clamp - Steel on the Small Parts and Bearings website.


Couplings - Rigid - 1 Piece Clamp - Stainless Steel
Couplings - Rigid - 1 Piece Clamp - Stainless Steel

Also see combined categories:
All Rigid Couplings

303 Grade Stainless

Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.

There is also a good range of Couplings - Rigid - 1 Piece Clamp - Stainless Steel on the Small Parts and Bearings website.


Couplings - Rigid - Set Screw
Couplings - Rigid - Set Screw

Also see combined categories:
All Rigid Couplings

0.35 to 5.1 Nm. Includes steel, stainless steel, brass and aluminium.

Quality Class Precision: Bore Tolerance +0.013 / - 0.000 concentric within 0.0127mm T.I.R. Quality Class Commercial: Bore Tolerance +0.051 / -0.000.

Related Information:

There is also a good range of Couplings - Rigid - Set Screw on the Small Parts and Bearings website.


Couplings - Reli-a-flex - Long Series - Clamp Type
Couplings - Reli-a-flex - Long Series - Clamp Type

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:

There is also a good range of Couplings - Reli-a-flex - Long Series - Clamp Type on the Small Parts and Bearings website.


Couplings - Reli-a-flex - Short Series - Clamp Type
Couplings - Reli-a-flex - Short Series - Clamp Type

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:

There is also a good range of Couplings - Reli-a-flex - Short Series - Clamp Type on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - One Piece - Steel
Collars - Shaft - Clamp Type - One Piece - Steel

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - One Piece - Steel on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - Two Piece - Steel
Collars - Shaft - Clamp Type - Two Piece - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - Two Piece - Steel on the Small Parts and Bearings website.




Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Includes 303 and 304 Grade Stainless


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel on the Small Parts and Bearings website.


Pins - Side Thrust - Double Sided - Steel Ball
Pins - Side Thrust - Double Sided - Steel Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Double Sided - Steel Ball on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Steel Ball
Pins - Side Thrust - Single Sided - Steel Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Steel Ball on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Plastic Ball
Pins - Side Thrust - Single Sided - Plastic Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Plastic ball and stainless spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Plastic Ball on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Stainless Ball
Pins - Side Thrust - Single Sided - Stainless Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Stainless Ball on the Small Parts and Bearings website.


Clamps - Lorenz
Clamps - Lorenz


Patented quick clamp is ideal for door openings on bins, hoppers, tanks and manholes. T-Handle allows torque without tools. The one piece unit is made from highly polished 304 stainless steel.

Full 50.8mm adjustment. 180o pivot when disengaged leaving access doorway unobstructed. Will not loosen through vibration. Brackets supplied for easy installation.

There is also a good range of Clamps - Lorenz on the Small Parts and Bearings website.


Couplings - Oldham - Hubs - Clamp Style
Couplings - Oldham - Hubs - Clamp Style

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Hubs

0.06 to 44 Nm. Max Speed: 3000 RPM.

Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

There is also a good range of Couplings - Oldham - Hubs - Clamp Style on the Small Parts and Bearings website.


Couplings - Oldham - Disks for Clamp Style
Couplings - Oldham - Disks for Clamp Style

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Disks

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

There is also a good range of Couplings - Oldham - Disks for Clamp Style on the Small Parts and Bearings website.


Couplings - BoWex - Junior
Couplings - BoWex - Junior


Nylon 2 piece and 3 piece couplings. 5 to 24 Nm. 6000 rpm max.

Approved distribution through the Australian Wholesaler (Deanquip). Crowned gear teeth - No need for lubrication. Chemical resistant nylon. Electrically insulated. Grub Screw opposite Keyway.

Related Information:

There is also a good range of Couplings - BoWex - Junior on the Small Parts and Bearings website.


Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:

There is also a good range of Shafts - Flexible - Coupling Ends - Open - Mild Steel on the Small Parts and Bearings website.


Couplings - Slit Type - Standard
Couplings - Slit Type - Standard

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.

High Torsional Stiffness. Zero Backlash.

Related Information:

There is also a good range of Couplings - Slit Type - Standard on the Small Parts and Bearings website.


Couplings - Flex Beam - Set Screw Style
Couplings - Flex Beam - Set Screw Style

Also see combined categories:
All Helical and Slit Couplings

Zero backlash machined from a single piece of aluminium and featuring two sets of spiral cuts.

Higher torque and reduced windup compared to commodity type single beam couplings.

There is also a good range of Couplings - Flex Beam - Set Screw Style on the Small Parts and Bearings website.


Couplings - Neo-Flex
Couplings - Neo-Flex


0.71 to 1.27 Nm.

303 stainless steel with 73 durometer neoprene centre. Shaft to shaft insulation. Torsional vibration isolation. Ribbed style are more flexible than smooth style. Bore Tolerances: +0.025 / -0.000.

Related Information:

There is also a good range of Couplings - Neo-Flex on the Small Parts and Bearings website.


Couplings - Bellows - Set Screw - 316 Stainless
Couplings - Bellows - Set Screw - 316 Stainless

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Related Information:

There is also a good range of Couplings - Bellows - Set Screw - 316 Stainless on the Small Parts and Bearings website.


Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium


Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:

There is also a good range of Couplings - Double Disk - Aluminium on the Small Parts and Bearings website.


Spacers - Hex - Threaded - Steel
Spacers - Hex - Threaded - Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


There is also a good range of Spacers - Hex - Threaded - Steel on the Small Parts and Bearings website.


Couplings - K Type
Couplings - K Type


Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:

There is also a good range of Couplings - K Type on the Small Parts and Bearings website.


Collars - Shaft - Hinged - Steel
Collars - Shaft - Hinged - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

There is also a good range of Collars - Shaft - Hinged - Steel on the Small Parts and Bearings website.


Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

There is also a good range of Collars - Shaft - Hinged - Stainless Steel on the Small Parts and Bearings website.


Spacers - Hex - Threaded - 316 Stainless Steel
Spacers - Hex - Threaded - 316 Stainless Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


There is also a good range of Spacers - Hex - Threaded - 316 Stainless Steel on the Small Parts and Bearings website.


Spacers - Hex - Threaded - 303-304 Stainless Steel
Spacers - Hex - Threaded - 303-304 Stainless Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


There is also a good range of Spacers - Hex - Threaded - 303-304 Stainless Steel on the Small Parts and Bearings website.


Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:

There is also a good range of Leadscrew Nuts - Metric - Round - Metallic on the Small Parts and Bearings website.


Couplings - Reli-a-flex - Short Series - Set Screw Type
Couplings - Reli-a-flex - Short Series - Set Screw Type

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:

There is also a good range of Couplings - Reli-a-flex - Short Series - Set Screw Type on the Small Parts and Bearings website.


Rod Ends - Steel - Bronze Lined - Female
Rod Ends - Steel - Bronze Lined - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Steel - Bronze Lined - Female on the Small Parts and Bearings website.


Rod Ends - Steel - Bronze Lined - Male
Rod Ends - Steel - Bronze Lined - Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Steel - Bronze Lined - Male on the Small Parts and Bearings website.


Rod Ends - Stainless Steel - Bronze Lined - Male
Rod Ends - Stainless Steel - Bronze Lined - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.

There is also a good range of Rod Ends - Stainless Steel - Bronze Lined - Male on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.


Bushes - Steel - DU - Split - Flanged
Bushes - Steel - DU - Split - Flanged

Also see combined categories:
All Steel Bushes
All Flanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Steel - DU - Split - Flanged on the Small Parts and Bearings website.


Bushes - Steel - DU - Split - Unflanged
Bushes - Steel - DU - Split - Unflanged

Also see combined categories:
All Steel Bushes
All Unflanged Steel Bushes

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.

Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.

Related Information:

There is also a good range of Bushes - Steel - DU - Split - Unflanged on the Small Parts and Bearings website.


Sprockets - Ladder Chain - 7.264mm Pitch - Size 18
Sprockets - Ladder Chain - 7.264mm Pitch - Size 18

Also see combined categories:
All Sprockets for Ladder Chain

Plastic, bronze and steel.


Related Information:

There is also a good range of Sprockets - Ladder Chain - 7.264mm Pitch - Size 18 on the Small Parts and Bearings website.


Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Also see combined categories:
All Press In Bearings

Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.

Related Information:

There is also a good range of Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP on the Small Parts and Bearings website.


Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel


Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

There is also a good range of Splined Shafts - Stainless Steel on the Small Parts and Bearings website.


Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.

There is also a good range of Pulleys - Blocks - Eye - Swivel on the Small Parts and Bearings website.


Pulleys - Blocks - Flat
Pulleys - Blocks - Flat

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.

There is also a good range of Pulleys - Blocks - Flat on the Small Parts and Bearings website.


Collars - Threaded - Clamp Type - Steel
Collars - Threaded - Clamp Type - Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Related Information:

There is also a good range of Collars - Threaded - Clamp Type - Steel on the Small Parts and Bearings website.


Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Also see combined categories:
All Split Rings

316 stainless steel wire rings.


There is also a good range of Rings - Split - Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - One Piece - Aluminium
Collars - Shaft - Clamp Type - One Piece - Aluminium

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - One Piece - Aluminium on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - Two Piece - Aluminium
Collars - Shaft - Clamp Type - Two Piece - Aluminium

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - Two Piece - Aluminium on the Small Parts and Bearings website.


Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Related Information:

There is also a good range of Collars - Threaded - Clamp Type - Stainless Steel on the Small Parts and Bearings website.


Pulleys - Blocks - Eye - Fixed
Pulleys - Blocks - Eye - Fixed

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.

There is also a good range of Pulleys - Blocks - Eye - Fixed on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123610 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123610 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.