Miniature Bearings Australia Pty Ltd

Collars Shaft Standard Nylon Categories


Collars


Collars - Shaft - Standard - Nylon
Collars - Shaft - Standard - Nylon

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Standard one piece nylon shaft collar with set screw

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

There is also a good range of Collars - Shaft - Standard - Nylon on the Small Parts and Bearings website.


Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

There is also a good range of Collars - Shaft - Standard - Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Standard - Steel
Collars - Shaft - Standard - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

There is also a good range of Collars - Shaft - Standard - Steel on the Small Parts and Bearings website.


Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

There is also a good range of Collars - Shaft - Hinged - Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Hinged - Steel
Collars - Shaft - Hinged - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

There is also a good range of Collars - Shaft - Hinged - Steel on the Small Parts and Bearings website.


You may also be interested in

Rod Ends Standard


Rod Ends - Steel - Nylon Raceway - Female
Rod Ends - Steel - Nylon Raceway - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Steel - Nylon Raceway - Female on the Small Parts and Bearings website.


Rod Ends - Steel - Nylon Raceway - Male
Rod Ends - Steel - Nylon Raceway - Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Steel - Nylon Raceway - Male on the Small Parts and Bearings website.


Linear Bearings


Bearings - Linear - Frelon J Lined - Closed - Standard
Bearings - Linear - Frelon J Lined - Closed - Standard

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Related Information:

There is also a good range of Bearings - Linear - Frelon J Lined - Closed - Standard on the Small Parts and Bearings website.


Bearings - Linear - Ball - Closed
Bearings - Linear - Ball - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

There is also a good range of Bearings - Linear - Ball - Closed on the Small Parts and Bearings website.


Bearings - Linear - Frelon Gold Lined - Closed - Standard
Bearings - Linear - Frelon Gold Lined - Closed - Standard

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:

There is also a good range of Bearings - Linear - Frelon Gold Lined - Closed - Standard on the Small Parts and Bearings website.


Bearings - Linear - Frelon Gold Lined - Open - Standard
Bearings - Linear - Frelon Gold Lined - Open - Standard

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:

There is also a good range of Bearings - Linear - Frelon Gold Lined - Open - Standard on the Small Parts and Bearings website.


Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

There is also a good range of Bearings - Linear - Ball - Stainless Steel - Closed on the Small Parts and Bearings website.


Sprockets - 6.35 x 2.8mm - Simplex - Plastic
Sprockets -  6.35 x 2.8mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 6.35mm plastic or steel chain (25-1 ASA). American Standard 25-1 - 1/4 inch.

Related Information:

There is also a good range of Sprockets - 6.35 x 2.8mm - Simplex - Plastic on the Small Parts and Bearings website.


Sprockets - 9.53 x 4.7mm - Simplex - Plastic
Sprockets -  9.53 x 4.7mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 9.53x4.7mm plastic or steel chain (35-1 ASA). American Standard 35-1 - 3/8 inch.

Related Information:

There is also a good range of Sprockets - 9.53 x 4.7mm - Simplex - Plastic on the Small Parts and Bearings website.


Collars - Shaft - Gripfast - ABS Plastic
Collars - Shaft - Gripfast - ABS Plastic

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Related Information:

There is also a good range of Collars - Shaft - Gripfast - ABS Plastic on the Small Parts and Bearings website.


Knobs - Ball - Knock On - Phenolic
Knobs - Ball - Knock On - Phenolic


Moulded from black phenolic resin.

Light Weight. Thermal insulating. Non corrosive. POK Type have a ribbed insert. Shaft should be 0 to 0.007 mm undersized for best results. 712 Type suit standard metric rod.

Related Information:

There is also a good range of Knobs - Ball - Knock On - Phenolic on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - One Piece - Aluminium
Collars - Shaft - Clamp Type - One Piece - Aluminium

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - One Piece - Aluminium on the Small Parts and Bearings website.




Collars - Shaft - Clamp Type - One Piece - Steel
Collars - Shaft - Clamp Type - One Piece - Steel

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - One Piece - Steel on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Includes 303 and 304 Grade Stainless


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - Two Piece - Aluminium
Collars - Shaft - Clamp Type - Two Piece - Aluminium

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - Two Piece - Aluminium on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - Two Piece - Steel
Collars - Shaft - Clamp Type - Two Piece - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - Two Piece - Steel on the Small Parts and Bearings website.


Collars - Shaft - Fairloc
Collars - Shaft - Fairloc

Also see combined categories:
All Round Bore Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Fairloc on the Small Parts and Bearings website.


Collars - Shaft - Gripfast - 304 Stainless Steel
Collars - Shaft - Gripfast - 304 Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Related Information:

There is also a good range of Collars - Shaft - Gripfast - 304 Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Also see combined categories:
All Hex Bore Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Hex Bore - One Piece - Steel
Collars - Shaft - Hex Bore - One Piece - Steel

Also see combined categories:
All Hex Bore Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Hex Bore - One Piece - Steel on the Small Parts and Bearings website.


Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel

Also see combined categories:
All Hex Bore Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Hex Bore - Two Piece - Steel
Collars - Shaft - Hex Bore - Two Piece - Steel

Also see combined categories:
All Hex Bore Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Hex Bore - Two Piece - Steel on the Small Parts and Bearings website.


Collars - Shaft - With Integral Shim
Collars - Shaft - With Integral Shim

Also see combined categories:
All Round Bore Shaft Collars

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Related Information:

There is also a good range of Collars - Shaft - With Integral Shim on the Small Parts and Bearings website.


Collars - Threaded - Clamp Type - Steel
Collars - Threaded - Clamp Type - Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Related Information:

There is also a good range of Collars - Threaded - Clamp Type - Steel on the Small Parts and Bearings website.


Motors - DC 26.9X24.2X18.3 mm
Motors - DC 26.9X24.2X18.3 mm

Also see combined categories:
All DC Motors

MF-26 Series - 1.5 to 24 VDC - 3600 to 15900 RPM. Standard 130 Size Hobby Motor.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 26.9X24.2X18.3 mm on the Small Parts and Bearings website.


Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Related Information:

There is also a good range of Collars - Threaded - Clamp Type - Stainless Steel on the Small Parts and Bearings website.


Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:

There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.


Sprockets - 9.53 x 5.7mm - Simplex - Plastic
Sprockets -  9.53 x 5.7mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 9.53x5.7mm steel chain (06B BS). British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

There is also a good range of Sprockets - 9.53 x 5.7mm - Simplex - Plastic on the Small Parts and Bearings website.


Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:

There is also a good range of Shafts - Flexible - Coupling Ends - Open - Mild Steel on the Small Parts and Bearings website.


Balls - Tooling - Two Piece - Standard - Steel - Press Fit
Balls - Tooling - Two Piece - Standard - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Tooling - Two Piece - Standard - Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - Two Piece - Standard - Steel - Slip Fit
Balls - Tooling - Two Piece - Standard - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Tooling - Two Piece - Standard - Steel - Slip Fit on the Small Parts and Bearings website.


Spacers - Round - Through Bore - Nylon
Spacers - Round - Through Bore - Nylon

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Shaft spacers - Nylon


There is also a good range of Spacers - Round - Through Bore - Nylon on the Small Parts and Bearings website.


Sprockets - 12.7 x 6.38mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 6.38mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x6.38mm simplex chain (41-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 41-1 - 1/2 inch.

Related Information:

There is also a good range of Sprockets - 12.7 x 6.38mm - Simplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm duplex chain (08B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch.

Related Information:

There is also a good range of Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore on the Small Parts and Bearings website.


Socket Set Screws - Nylon Tipped - Alloy Steel
Socket Set Screws - Nylon Tipped - Alloy Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:

There is also a good range of Socket Set Screws - Nylon Tipped - Alloy Steel on the Small Parts and Bearings website.


Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:

There is also a good range of Socket Set Screws - Nylon Tipped - 304 Stainless Steel on the Small Parts and Bearings website.


Bearings - Ball - High Speed Cage
Bearings - Ball - High Speed Cage

Also see combined categories:
All Radial Ball Bearings

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Related Information:

There is also a good range of Bearings - Ball - High Speed Cage on the Small Parts and Bearings website.


Hooks - Standard - Vertical Mount - 304 Stainless
Hooks - Standard - Vertical Mount - 304 Stainless


Mirror finish with 15kg Load Capacity. Ideal for corrosive environments.


There is also a good range of Hooks - Standard - Vertical Mount - 304 Stainless on the Small Parts and Bearings website.


Most Common Standard Duty Jockey Wheels Parts
Most Common Standard Duty Jockey Wheels Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Most Common Standard Duty Jockey Wheels Parts on the Small Parts and Bearings website.


Rollers - Yoke - Standard
Rollers - Yoke - Standard

Also see combined categories:
All Rollers


There is also a good range of Rollers - Yoke - Standard on the Small Parts and Bearings website.


Circlips - External - Standard - Berryllium Copper
Circlips - External - Standard - Berryllium Copper

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).


Related Information:

There is also a good range of Circlips - External - Standard - Berryllium Copper on the Small Parts and Bearings website.


Circlips - External - Standard - Carbon Steel
Circlips - External - Standard - Carbon Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Plain carbon steel.

Related Information:

There is also a good range of Circlips - External - Standard - Carbon Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Stainless Steel
Circlips - External - Standard - Stainless Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. 420 Stainless Steel. Retaining rings. Snap Rings (USA).

420 Stainless Steel.

Related Information:

There is also a good range of Circlips - External - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Zinc Plated
Circlips - External - Standard - Zinc Plated

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel.

Related Information:

There is also a good range of Circlips - External - Standard - Zinc Plated on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2555 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2555 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.