Miniature Bearings Australia Pty Ltd

Clutches Slip Magnetic Particle No Power Categories


Clutches


Clutches - Slip - Magnetic Particle - No Power
Clutches - Slip - Magnetic Particle - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:

There is also a good range of Clutches - Slip - Magnetic Particle - No Power on the Small Parts and Bearings website.


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:

There is also a good range of Clutches - Slip - Magnetic Particle - Integral Shaft - No Power on the Small Parts and Bearings website.


Clutches - Magnetic Particle 24VDC
Clutches - Magnetic Particle 24VDC

Also see combined categories:
All Magnetic Clutches

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Related Information:

There is also a good range of Clutches - Magnetic Particle 24VDC on the Small Parts and Bearings website.


Clutches - Slip - Inline
Clutches - Slip - Inline

Also see combined categories:
All Slip Clutches

Multiplate Design.

Fully adjustable within rating limits. Low stick / slip ratio. Continuous slip within dissipation limit. Zinc plated steel housing with brass plates. Proprietary non-asbestos friction material.

Related Information:

There is also a good range of Clutches - Slip - Inline on the Small Parts and Bearings website.


Rings - Hoist - Heavy Duty
Rings - Hoist - Heavy Duty

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.

There is also a good range of Rings - Hoist - Heavy Duty on the Small Parts and Bearings website.


Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.

There is also a good range of Rings - Hoist - Safety Engineered on the Small Parts and Bearings website.


Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.

There is also a good range of Rings - Hoist - Heavy Duty - MIL-STD1365 on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Short on the Small Parts and Bearings website.


Catches - Magnetic - Screw On
Catches - Magnetic - Screw On


Various styles - refer pictures


There is also a good range of Catches - Magnetic - Screw On on the Small Parts and Bearings website.


Catches - Magnetic - Ultra Thin - Heavy Duty
Catches - Magnetic - Ultra Thin - Heavy Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.


Related Information:

There is also a good range of Catches - Magnetic - Ultra Thin - Heavy Duty on the Small Parts and Bearings website.


Catches - Magnetic - Ultra Thin - Light Duty
Catches - Magnetic - Ultra Thin - Light Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.


Related Information:

There is also a good range of Catches - Magnetic - Ultra Thin - Light Duty on the Small Parts and Bearings website.


Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

There is also a good range of Shafting - Aluminium - Ceramic Coated on the Small Parts and Bearings website.


Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.

There is also a good range of Washers - Disc Spring - Plastic on the Small Parts and Bearings website.


Screws - Cap - Socket - Nylon
Screws - Cap - Socket - Nylon

Also see combined categories:
All Socket Cap Screws
All Plastic Screws

UNC - UNF - METRIC - Non Conductive - Non Magnetic.


Related Information:

There is also a good range of Screws - Cap - Socket - Nylon on the Small Parts and Bearings website.


Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

There is also a good range of Shafting - Aluminium - Ceramic Coated - Tapped on the Small Parts and Bearings website.


Bearings - Ball - AISI304 Stainless Steel
Bearings - Ball - AISI304 Stainless Steel

Also see combined categories:
All 300 Grade Stainless Bearings

Corrosion and Heat resistance - Non Magnetic - Non Hardenable. Quality Japanese manufacture.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.05 / -0 mm , OD +0 / -0.03 mm up to 10mm bore, Width +0/- 0.12 mm. Mid range speed and load between 304 stainless and 440C stainless. Rubber seals are Nitrile but fluorine rubber may be available on request. Cages, balls, races and shields from AISI 304 Stainless Steel.

Related Information:


Balls - Stainless Steel - 304 Grade
Balls - Stainless Steel - 304 Grade

Also see combined categories:
All Metallic Balls

A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.

Tolerances available on request. Grade 100. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000 oC.

Related Information:

There is also a good range of Balls - Stainless Steel - 304 Grade on the Small Parts and Bearings website.


Screws - Round Head - Nylon - Slotted
Screws - Round Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Round Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Binder Head - Nylon - Philips
Screws - Binder Head - Nylon - Philips

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - Metric

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Binder Head - Nylon - Philips on the Small Parts and Bearings website.


Screws - Binder Head - Nylon - Slotted
Screws - Binder Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC and UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Binder Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Pan Head - Nylon - Slotted
Screws - Pan Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - Metric

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Pan Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Fillister Head - Nylon - Slotted
Screws - Fillister Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF. Cheese head

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Fillister Head - Nylon - Slotted on the Small Parts and Bearings website.


Screws - Countersunk - Nylon - Slotted
Screws - Countersunk - Nylon - Slotted

Also see combined categories:
All Countersunk Screws
All Plastic Countersunk Screws

Flat Head Countersunk UNC and UNF.

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Countersunk - Nylon - Slotted on the Small Parts and Bearings website.


Balls - Stainless Steel - 316 Grade
Balls - Stainless Steel - 316 Grade

Also see combined categories:
All Metallic Balls

A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.

Tolerances available on request. Grade 100. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000 oC.

Related Information:

There is also a good range of Balls - Stainless Steel - 316 Grade on the Small Parts and Bearings website.


Magnets - Rare Earth - Shielded
Magnets - Rare Earth - Shielded

Also see combined categories:
All Magnets
All Rare Earth Magnets

Insulator shield prevents loss of magnetic flux when inserted into steel components or fixtures

Shielded magnets supply holding forces in limited areas of steel tools, dies and fixtures.

There is also a good range of Magnets - Rare Earth - Shielded on the Small Parts and Bearings website.


Screws - Hex Washer Head - Black Nylon
Screws - Hex Washer Head - Black Nylon

Also see combined categories:
All Machine Screws
All Plastic Screws

1/4 UNC and UNF only

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

There is also a good range of Screws - Hex Washer Head - Black Nylon on the Small Parts and Bearings website.


Joints - Swivel - Miniature - Steel
Joints - Swivel - Miniature - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Miniature - Steel on the Small Parts and Bearings website.


Joints - Swivel - Knob Style - Steel
Joints - Swivel - Knob Style - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Knob Style - Steel on the Small Parts and Bearings website.


Joints - Swivel - Split Type - Steel
Joints - Swivel - Split Type - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Split Type - Steel on the Small Parts and Bearings website.


Joints - Swivel - Tee Handle - Steel
Joints - Swivel - Tee Handle - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Tee Handle - Steel on the Small Parts and Bearings website.


Joints - Swivel - Wing Knob - Steel
Joints - Swivel - Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Wing Knob - Steel on the Small Parts and Bearings website.


Joints - Swivel - Double Wing Knob - Steel
Joints - Swivel - Double Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Double Wing Knob - Steel on the Small Parts and Bearings website.


Joints - Swivel - Knob Style - Stainless Steel
Joints - Swivel - Knob Style - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


There is also a good range of Joints - Swivel - Knob Style - Stainless Steel on the Small Parts and Bearings website.


Joints - Swivel - Wing Knob - Stainless Steel
Joints - Swivel - Wing Knob - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


There is also a good range of Joints - Swivel - Wing Knob - Stainless Steel on the Small Parts and Bearings website.


Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

There is also a good range of Rings - Hoist - With Ball Bearings on the Small Parts and Bearings website.


3500 Ultra Power Long Cast Jarvis Walker Parts
3500 Ultra Power Long Cast Jarvis Walker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of 3500 Ultra Power Long Cast Jarvis Walker Parts on the Small Parts and Bearings website.


1900B Planer Makita Parts
1900B Planer Makita Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of 1900B Planer Makita Parts on the Small Parts and Bearings website.


Workwheel Black and Decker Parts
Workwheel Black and Decker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Workwheel Black and Decker Parts on the Small Parts and Bearings website.


B5006 Bandsaw - Table Mounted GMC Parts
B5006 Bandsaw - Table Mounted GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of B5006 Bandsaw - Table Mounted GMC Parts on the Small Parts and Bearings website.


BSG-151 Belt Sander Ozito Parts
BSG-151 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of BSG-151 Belt Sander Ozito Parts on the Small Parts and Bearings website.


BSR-1000 Belt Sander Ozito Parts
BSR-1000 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of BSR-1000 Belt Sander Ozito Parts on the Small Parts and Bearings website.


BSR-800 Belt Sander Ozito Parts
BSR-800 Belt Sander Ozito Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of BSR-800 Belt Sander Ozito Parts on the Small Parts and Bearings website.


KA85 Belt Sander Black and Decker Parts
KA85 Belt Sander Black and Decker Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of KA85 Belt Sander Black and Decker Parts on the Small Parts and Bearings website.


1-3HP Bench Sander 4 Inch GMC Parts
1-3HP Bench Sander 4 Inch GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of 1-3HP Bench Sander 4 Inch GMC Parts on the Small Parts and Bearings website.


6 Inch Bandsaw Vertical Bench Model GMC Parts
6 Inch Bandsaw Vertical Bench Model GMC Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of 6 Inch Bandsaw Vertical Bench Model GMC Parts on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Slotted Drive
Inserts - Self Tapping - For Wood - Slotted Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive on the Small Parts and Bearings website.


Springs - Extension - Music Wire
Springs - Extension - Music Wire

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:

There is also a good range of Springs - Extension - Music Wire on the Small Parts and Bearings website.


Springs - Extension - Stainless Steel
Springs - Extension - Stainless Steel

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:

There is also a good range of Springs - Extension - Stainless Steel on the Small Parts and Bearings website.


Bits - Power
Bits - Power


Power bits for use with power screwdrivers and drills


There is also a good range of Bits - Power on the Small Parts and Bearings website.


Magnets - Alcomax - Power
Magnets - Alcomax - Power

Also see combined categories:
All Magnets
All Alcomax Magnets

Supplied with keeper


There is also a good range of Magnets - Alcomax - Power on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123609 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123609 products in 2552 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.