Miniature Bearings Australia Pty Ltd

Balls Tooling One Piece Shoulder Steel Slip Fit Categories


Tooling Balls


Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Shoulder - Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Shoulder - Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit
Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. Knurled shoulder. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit on the Small Parts and Bearings website.


Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit
Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. Knurled shoulder. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Standard - Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Standard - Steel - Slip Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Standard - Steel - Press Fit
Balls - Tooling - One Piece - Standard - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Standard - Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Construction - Steel
Balls - Tooling - One Piece - Construction - Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Construction - Steel on the Small Parts and Bearings website.


Balls - Tooling - One Piece - Construction - Stainless Steel
Balls - Tooling - One Piece - Construction - Stainless Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 440C Stainless Steel heat treated to 55-58 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.

Related Information:

There is also a good range of Balls - Tooling - One Piece - Construction - Stainless Steel on the Small Parts and Bearings website.


Balls - Tooling - Two Piece - Standard - Steel - Slip Fit
Balls - Tooling - Two Piece - Standard - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Tooling - Two Piece - Standard - Steel - Slip Fit on the Small Parts and Bearings website.


Balls - Tooling - Two Piece - Standard - Steel - Press Fit
Balls - Tooling - Two Piece - Standard - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Tooling - Two Piece - Standard - Steel - Press Fit on the Small Parts and Bearings website.


Balls - Tooling - Two Piece - Construction - Steel
Balls - Tooling - Two Piece - Construction - Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. Construction balls can be pulled into a hole or bushing from below without applying pressure on the ball by using a cap screw in the internally tapped shank.

Related Information:

There is also a good range of Balls - Tooling - Two Piece - Construction - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Steel
Plungers - Indexing - Locking - With Shoulder - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Locking - With Shoulder - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Plungers - Indexing - Locking - With Shoulder - Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob
Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob
Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Small Parts and Bearings website.


Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

There is also a good range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Small Parts and Bearings website.


Balls - Checking - Stainless Steel
Balls - Checking - Stainless Steel

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Checking - Stainless Steel on the Small Parts and Bearings website.


Balls - Fixture - Stainless Steel
Balls - Fixture - Stainless Steel

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Fixture - Stainless Steel on the Small Parts and Bearings website.


Balls - Checking - Stainless Steel - With Tapped Shank
Balls - Checking - Stainless Steel - With Tapped Shank

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:

There is also a good range of Balls - Checking - Stainless Steel - With Tapped Shank on the Small Parts and Bearings website.


Balls - Inspection
Balls - Inspection

Also see combined categories:
All Fixture and Checking Balls

Premium short shank inspection balls are used as reference points for inspection applications in conjunction with coordinate measuring machines to accurately measure the workpiece.

Made from case hardened 8620 steel. Concentricity of ball to shank is 0.00254mm (0.0001 in.) TIR.

Related Information:

There is also a good range of Balls - Inspection on the Small Parts and Bearings website.


Pins - Side Thrust - Double Sided - Steel Ball
Pins - Side Thrust - Double Sided - Steel Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Double Sided - Steel Ball on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Steel Ball
Pins - Side Thrust - Single Sided - Steel Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Steel Ball on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob
Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob on the Small Parts and Bearings website.


Screws - Shoulder - Jig and Fixture - Steel
Screws - Shoulder - Jig and Fixture - Steel

Also see combined categories:
All Shoulder Screws

Used in construction of tool, jig and fixture work. 4140L heat treated steel with black oxide finish.

Also known as stripper bolts.

There is also a good range of Screws - Shoulder - Jig and Fixture - Steel on the Small Parts and Bearings website.


Screws - Shoulder - Socket Head - Carbon Steel
Screws - Shoulder - Socket Head - Carbon Steel

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.

There is also a good range of Screws - Shoulder - Socket Head - Carbon Steel on the Small Parts and Bearings website.


Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Screws - Shoulder - Slotted Shallow Head - Carbon Steel

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.

There is also a good range of Screws - Shoulder - Slotted Shallow Head - Carbon Steel on the Small Parts and Bearings website.


Screws - Thumb - Shoulder
Screws - Thumb - Shoulder

Also see combined categories:
All Thumb Screws

303 Stainless Steel


Related Information:

There is also a good range of Screws - Thumb - Shoulder on the Small Parts and Bearings website.


Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts.

There is also a good range of Screws - Shoulder - Slotted Head - Stainless on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Plastic Ball
Pins - Side Thrust - Single Sided - Plastic Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Plastic ball and stainless spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Plastic Ball on the Small Parts and Bearings website.


Pins - Side Thrust - Single Sided - Stainless Ball
Pins - Side Thrust - Single Sided - Stainless Ball

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body.

Related Information:

There is also a good range of Pins - Side Thrust - Single Sided - Stainless Ball on the Small Parts and Bearings website.


Collars - Shaft - Clamp Type - One Piece - Steel
Collars - Shaft - Clamp Type - One Piece - Steel

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Clamp Type - One Piece - Steel on the Small Parts and Bearings website.


Collars - Shaft - Hex Bore - One Piece - Steel
Collars - Shaft - Hex Bore - One Piece - Steel

Also see combined categories:
All Hex Bore Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Hex Bore - One Piece - Steel on the Small Parts and Bearings website.




Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated on the Small Parts and Bearings website.


Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.

There is also a good range of Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.


Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.

There is also a good range of Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel on the Small Parts and Bearings website.


Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Also see combined categories:
All Hex Bore Shaft Collars


Related Information:

There is also a good range of Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel on the Small Parts and Bearings website.


Screws - Panel - Steel
Screws - Panel - Steel

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. Carbon steel with black oxide finish.


There is also a good range of Screws - Panel - Steel on the Small Parts and Bearings website.


Socket Set Screws - Rolling Ball Tip - Carbon Steel
Socket Set Screws - Rolling Ball Tip - Carbon Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

There is also a good range of Socket Set Screws - Rolling Ball Tip - Carbon Steel on the Small Parts and Bearings website.


Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

There is also a good range of Socket Set Screws - Rolling Ball Tip - Stainless Steel on the Small Parts and Bearings website.


Screws - Panel - Stainless
Screws - Panel - Stainless

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. 303 Stainless Steel.


There is also a good range of Screws - Panel - Stainless on the Small Parts and Bearings website.


Pins - Ball Lock - Shoulder Type - Ring Handle
Pins - Ball Lock - Shoulder Type - Ring Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Also called detent pins.

Positive lock detent pins.

Related Information:

There is also a good range of Pins - Ball Lock - Shoulder Type - Ring Handle on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2554 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 123604 products in 2554 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.