Balls Tooling One Piece Shoulder Stainless Steel Press Fit Categories


Category Matches

Tooling Balls

TopHide Pictures

Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit

Search Rating: 74%

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit.

Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit

Search Rating: 73%

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit.

Balls - Tooling - One Piece - Construction - Stainless Steel
Balls - Tooling - One Piece - Construction - Stainless Steel

Search Rating: 63%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 440C Stainless Steel heat treated to 55-58 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Construction - Stainless Steel.

Balls - Tooling - One Piece - Shoulder - Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Steel - Press Fit

Search Rating: 61%

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Steel - Press Fit.

Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit

Search Rating: 60%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit.

Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit

Search Rating: 59%

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit.

Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit

Search Rating: 59%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit.

Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit
Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit

Search Rating: 55%

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. Knurled shoulder. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit.

Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit
Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit

Search Rating: 54%

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. Knurled shoulder. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit.

Balls - Tooling - One Piece - Construction - Steel
Balls - Tooling - One Piece - Construction - Steel

Search Rating: 50%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Construction - Steel.

Balls - Tooling - One Piece - Standard - Steel - Press Fit
Balls - Tooling - One Piece - Standard - Steel - Press Fit

Search Rating: 47%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Steel - Press Fit.

Balls - Tooling - One Piece - Standard - Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Steel - Slip Fit

Search Rating: 46%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Steel - Slip Fit.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Plungers - Indexing - Locking - With Shoulder - Stainless Steel

Search Rating: 44%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel.

Tooling Balls

TopHide Pictures

Balls - Tooling - Two Piece - Construction - Steel
Balls - Tooling - Two Piece - Construction - Steel

Search Rating: 43%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. Construction balls can be pulled into a hole or bushing from below without applying pressure on the ball by using a cap screw in the internally tapped shank.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Construction - Steel.

Balls - Tooling - Two Piece - Standard - Steel - Press Fit
Balls - Tooling - Two Piece - Standard - Steel - Press Fit

Search Rating: 42%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Standard - Steel - Press Fit.

Balls - Tooling - Two Piece - Standard - Steel - Slip Fit
Balls - Tooling - Two Piece - Standard - Steel - Slip Fit

Search Rating: 41%

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Standard - Steel - Slip Fit.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Grooved - Stainless Steel.

Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Stainless Steel.

Tooling Balls

TopHide Pictures

Balls - Checking - Stainless Steel
Balls - Checking - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Checking - Stainless Steel.

Balls - Fixture - Stainless Steel
Balls - Fixture - Stainless Steel

Search Rating: 41%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Fixture - Stainless Steel.

Balls - Checking - Stainless Steel - With Tapped Shank
Balls - Checking - Stainless Steel - With Tapped Shank

Search Rating: 40%

Also see combined categories:
All Fixture and Checking Balls

440C Hardened to RC 55-58.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Balls - Checking - Stainless Steel - With Tapped Shank.

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob
Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob

Search Rating: 36%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob.

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Search Rating: 35%

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Shoulder - Slotted Head - Stainless.

Screws Thumb

TopHide Pictures

Screws - Thumb - Shoulder
Screws - Thumb - Shoulder

Search Rating: 35%

Also see combined categories:
All Thumb Screws

303 Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Shoulder.

Pins General

TopHide Pictures

Pins - Side Thrust - Single Sided - Stainless Ball
Pins - Side Thrust - Single Sided - Stainless Ball

Search Rating: 35%

Also see combined categories:
All Side Thrust Pins

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Side Thrust - Single Sided - Stainless Ball.

Collars

TopHide Pictures

Collars - Shaft - Clamp Type - One Piece - Stainless Steel
Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Search Rating: 35%

Also see combined categories:
All Round Bore Shaft Collars
All One Piece Clamp Type Shaft Collars

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Clamp Type - One Piece - Stainless Steel.

Eyebolts

TopHide Pictures

Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel

Search Rating: 35%

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel.

Collars

TopHide Pictures

Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel
Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Search Rating: 34%

Also see combined categories:
All Hex Bore Shaft Collars


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel.

Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Search Rating: 34%

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Socket Set Screws - Rolling Ball Tip - Stainless Steel.

Screws Panel

TopHide Pictures

Screws - Panel - Stainless
Screws - Panel - Stainless

Search Rating: 34%

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. 303 Stainless Steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Panel - Stainless.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Ball Lock - Threaded End - Stainless Steel.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 123431 products in 2841 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.