Pins - Dowel - Standard

852 Products in this selection
This is a combined category of Standard Dowel Pins.
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances

Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
A more concise listing may be found on the Smallparts store at Pins - Dowel - Standard. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
19.00
mm
+/- 0.420
Approx. Overall Length
19.60
mm
+/ - 0.420
Type
3 (Rounded Ends)
Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP020-019-304-3 (50 Pcs) Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
7 units (350 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Per 50
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
19.00
mm
+/- 0.420
Approx. Overall Length
19.60
mm
+/ - 0.420
Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP020-019-304-3 (50 Pcs) Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
7 units (350 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Per 50
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
Type
2 (Chamfer Both Ends)
1041602 | DP020-020-303-2 (20 Pcs) --- Dowel Pins - 2x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP020-020-303-2 (20 Pcs) Dowel Pins - 2x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
64 units (1280 pcs) Available Immediately | Further orders can be expected around Sun, Jul 20, 2025
$6.50 AUD
$6.50 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
1041602 | DP020-020-303-2 (20 Pcs) --- Dowel Pins - 2x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP020-020-303-2 (20 Pcs) Dowel Pins - 2x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
64 units (1280 pcs) Available Immediately | Further orders can be expected around Sun, Jul 20, 2025
$6.50 AUD
$6.50 AUD
Per 20
View the product page first if you are unsure.
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
Type
2 (Chamfer Both Ends)
Dowel Pins - 2x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP020-024-303-2 (500 Pcs) Dowel Pins - 2x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
Dowel Pins - 2x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP020-024-303-2 (500 Pcs) Dowel Pins - 2x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Type
1 (Chamfer One End)
1041846 | DP025-006-CH-1 (375 Pcs) --- Dowel Pins - 2.5x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-006-CH-1 (375 Pcs) Dowel Pins - 2.5x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Wed, Dec 31, 2025
$138.68 AUD
$138.68 AUD
Per 375
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
1041846 | DP025-006-CH-1 (375 Pcs) --- Dowel Pins - 2.5x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-006-CH-1 (375 Pcs) Dowel Pins - 2.5x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Wed, Dec 31, 2025
$138.68 AUD
$138.68 AUD
Per 375
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x6x6 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-006-416-2 Dowel Pins - 2.5x6x6 mm - Stainless Steel AISI 416 Rc 36-42
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Dowel Pins - 2.5x6x6 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-006-416-2 Dowel Pins - 2.5x6x6 mm - Stainless Steel AISI 416 Rc 36-42
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.80
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-006-304-3 (20 Pcs) Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
11 units (220 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.80
mm
+/ - 0.254
Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-006-304-3 (20 Pcs) Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 Similar to A2, 18-8 HRB80
11 units (220 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.80
mm
+/ - 0.254
Type
3 (Rounded Ends)
1041850 | DP025-006-C-3 (100 Pcs) --- Dowel Pins - 2.5x6x6.8 mm - Carbon Steel Unhardened
Material: Carbon Steel Unhardened   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-006-C-3 (100 Pcs) Dowel Pins - 2.5x6x6.8 mm - Carbon Steel Unhardened
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$24.05 AUD
$24.05 AUD
Per 100
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.80
mm
+/ - 0.254
1041850 | DP025-006-C-3 (100 Pcs) --- Dowel Pins - 2.5x6x6.8 mm - Carbon Steel Unhardened
Material: Carbon Steel Unhardened    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-006-C-3 (100 Pcs) Dowel Pins - 2.5x6x6.8 mm - Carbon Steel Unhardened
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$24.05 AUD
$24.05 AUD
Per 100
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
Type
1 (Chamfer One End)
1042007 | DP025-008-CH-1 --- Dowel Pins - 2.5x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-008-CH-1 Dowel Pins - 2.5x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
1042007 | DP025-008-CH-1 --- Dowel Pins - 2.5x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-008-CH-1 Dowel Pins - 2.5x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.80
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2.5 mm x 8 mm x 8.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-008-304-3 (5 Pcs) Dowel Pins - 2.5x8x8.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
597 units (2985 pcs) Available Immediately | Further orders can be expected around Thu, Jul 10, 2025
$12.86 AUD
$12.86 AUD
Per 5
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.80
mm
+/ - 0.254
Dowel Pins - 2.5 mm x 8 mm x 8.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-008-304-3 (5 Pcs) Dowel Pins - 2.5x8x8.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
597 units (2985 pcs) Available Immediately | Further orders can be expected around Thu, Jul 10, 2025
$12.86 AUD
$12.86 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
9.00
mm
+/- 0.254
Approx. Overall Length
9.80
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2.5 mm x 9 mm x 9.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-009-304-3 Dowel Pins - 2.5x9x9.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
9.00
mm
+/- 0.254
Approx. Overall Length
9.80
mm
+/ - 0.254
Dowel Pins - 2.5 mm x 9 mm x 9.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-009-304-3 Dowel Pins - 2.5x9x9.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1042074 | DP025-010-CH-1 (50 Pcs) --- Dowel Pins - 2.5x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-010-CH-1 (50 Pcs) Dowel Pins - 2.5x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
4 units (200 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$20.77 AUD
$20.77 AUD
Per 50
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
1042074 | DP025-010-CH-1 (50 Pcs) --- Dowel Pins - 2.5x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-010-CH-1 (50 Pcs) Dowel Pins - 2.5x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
4 units (200 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$20.77 AUD
$20.77 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.254
Approx. Overall Length
10.80
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2.5x10x10.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-010-304-3 (1000 Pcs) Dowel Pins - 2.5x10x10.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.254
Approx. Overall Length
10.80
mm
+/ - 0.254
Dowel Pins - 2.5x10x10.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-010-304-3 (1000 Pcs) Dowel Pins - 2.5x10x10.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
11.00
mm
+/- 0.350
Approx. Overall Length
11.80
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2.5x11x11.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-011-304-3 (500 Pcs) Dowel Pins - 2.5x11x11.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
11.00
mm
+/- 0.350
Approx. Overall Length
11.80
mm
+/ - 0.350
Dowel Pins - 2.5x11x11.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-011-304-3 (500 Pcs) Dowel Pins - 2.5x11x11.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1042134 | DP025-012-CH-1 (20 Pcs) --- Dowel Pins - 2.5x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-012-CH-1 (20 Pcs) Dowel Pins - 2.5x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
61 units (1220 pcs) Available Immediately | Further orders can be expected around Wed, Dec 31, 2025
$9.32 AUD
$9.32 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.00
mm
+/ - 0.350
1042134 | DP025-012-CH-1 (20 Pcs) --- Dowel Pins - 2.5x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-012-CH-1 (20 Pcs) Dowel Pins - 2.5x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
61 units (1220 pcs) Available Immediately | Further orders can be expected around Wed, Dec 31, 2025
$9.32 AUD
$9.32 AUD
Per 20
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.80
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2.5x12x12.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-012-304-3 (500 Pcs) Dowel Pins - 2.5x12x12.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.80
mm
+/ - 0.350
Dowel Pins - 2.5x12x12.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-012-304-3 (500 Pcs) Dowel Pins - 2.5x12x12.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1042182 | DP025-014-CH-1 (10 Pcs) --- Dowel Pins - 2.5x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-014-CH-1 (10 Pcs) Dowel Pins - 2.5x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
1 pack (10 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 10
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
1042182 | DP025-014-CH-1 (10 Pcs) --- Dowel Pins - 2.5x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-014-CH-1 (10 Pcs) Dowel Pins - 2.5x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
1 pack (10 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 10
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.80
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2.5x14x14.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-014-304-3 (500 Pcs) Dowel Pins - 2.5x14x14.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.80
mm
+/ - 0.350
Dowel Pins - 2.5x14x14.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-014-304-3 (500 Pcs) Dowel Pins - 2.5x14x14.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1042215 | DP025-016-CH-1 (5 Pcs) --- Dowel Pins - 2.5x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-016-CH-1 (5 Pcs) Dowel Pins - 2.5x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
28 units (140 pcs) Available Immediately | Further orders can be expected around Wed, Dec 31, 2025
$2.95 AUD
$2.95 AUD
Per 5
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
1042215 | DP025-016-CH-1 (5 Pcs) --- Dowel Pins - 2.5x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-016-CH-1 (5 Pcs) Dowel Pins - 2.5x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
28 units (140 pcs) Available Immediately | Further orders can be expected around Wed, Dec 31, 2025
$2.95 AUD
$2.95 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.80
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2.5x16x16.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-016-304-3 (1000 Pcs) Dowel Pins - 2.5x16x16.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.80
mm
+/ - 0.350
Dowel Pins - 2.5x16x16.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-016-304-3 (1000 Pcs) Dowel Pins - 2.5x16x16.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1042314 | DP025-020-CH-1 (20 Pcs) --- Dowel Pins - 2.5x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-020-CH-1 (20 Pcs) Dowel Pins - 2.5x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
1 pack (20 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$10.59 AUD
$10.59 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
1042314 | DP025-020-CH-1 (20 Pcs) --- Dowel Pins - 2.5x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-020-CH-1 (20 Pcs) Dowel Pins - 2.5x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
1 pack (20 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$10.59 AUD
$10.59 AUD
Per 20
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
22.00
mm
+/- 0.420
Approx. Overall Length
22.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1042354 | DP025-022-CH-1 (10 Pcs) --- Dowel Pins - 2.5x22x22 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-022-CH-1 (10 Pcs) Dowel Pins - 2.5x22x22 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
3 units (30 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 10
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
22.00
mm
+/- 0.420
Approx. Overall Length
22.00
mm
+/ - 0.420
1042354 | DP025-022-CH-1 (10 Pcs) --- Dowel Pins - 2.5x22x22 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-022-CH-1 (10 Pcs) Dowel Pins - 2.5x22x22 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
3 units (30 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 10
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1042363 | DP025-024-CH-1 (20 Pcs) --- Dowel Pins - 2.5x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-024-CH-1 (20 Pcs) Dowel Pins - 2.5x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
30 units (600 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
1042363 | DP025-024-CH-1 (20 Pcs) --- Dowel Pins - 2.5x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-024-CH-1 (20 Pcs) Dowel Pins - 2.5x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
30 units (600 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.80
mm
+/ - 0.420
Type
3 (Rounded Ends)
Dowel Pins - 2.5x24x24.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-024-304-3 (500 Pcs) Dowel Pins - 2.5x24x24.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.80
mm
+/ - 0.420
Dowel Pins - 2.5x24x24.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)   
Category: Pins - Dowel - Standard - Rounded Ends
Part Number: DP025-024-304-3 (500 Pcs) Dowel Pins - 2.5x24x24.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
26.00
mm
+/- 0.420
Approx. Overall Length
26.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1042406 | DP025-026-CH-1 (20 Pcs) --- Dowel Pins - 2.5x26x26 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-026-CH-1 (20 Pcs) Dowel Pins - 2.5x26x26 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
93 units (1860 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$19.14 AUD
$19.14 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
26.00
mm
+/- 0.420
Approx. Overall Length
26.00
mm
+/ - 0.420
1042406 | DP025-026-CH-1 (20 Pcs) --- Dowel Pins - 2.5x26x26 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends
Part Number: DP025-026-CH-1 (20 Pcs) Dowel Pins - 2.5x26x26 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
93 units (1860 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$19.14 AUD
$19.14 AUD
Per 20
View the product page first if you are unsure.