Pins - Dowel - Standard - Chamfered Ends

689 Products in this selection
This is a combined category of Chamfered Ends Standard Dowel Pins.
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances

Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
A more concise listing may be found on the Smallparts store at Pins - Dowel - Standard - Chamfered Ends. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
32.00
mm
+/- 0.500
Approx. Overall Length
32.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1091995 | DP100-032-CH-1 (50 Pcs) --- Dowel Pins - 10x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-032-CH-1 (50 Pcs) Dowel Pins - 10x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$189.77 AUD
$189.77 AUD
Per 50
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
32.00
mm
+/- 0.500
Approx. Overall Length
32.00
mm
+/ - 0.500
1091995 | DP100-032-CH-1 (50 Pcs) --- Dowel Pins - 10x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-032-CH-1 (50 Pcs) Dowel Pins - 10x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$189.77 AUD
$189.77 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
32.00
mm
+/- 0.500
Approx. Overall Length
32.00
mm
+/ - 0.500
Type
2 (Chamfer Both Ends)
1091997 | DP100-032-303-2 --- Dowel Pins - 10x32x32 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-032-303-2 Dowel Pins - 10x32x32 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
32.00
mm
+/- 0.500
Approx. Overall Length
32.00
mm
+/ - 0.500
1091997 | DP100-032-303-2 --- Dowel Pins - 10x32x32 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-032-303-2 Dowel Pins - 10x32x32 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
40.00
mm
+/- 0.500
Approx. Overall Length
40.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1092240 | DP100-040-CH-1 (2 Pcs) --- Dowel Pins - 10x40x40 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-040-CH-1 (2 Pcs) Dowel Pins - 10x40x40 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
3 units (6 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$9.05 AUD
$9.05 AUD
Per 2
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
40.00
mm
+/- 0.500
Approx. Overall Length
40.00
mm
+/ - 0.500
1092240 | DP100-040-CH-1 (2 Pcs) --- Dowel Pins - 10x40x40 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-040-CH-1 (2 Pcs) Dowel Pins - 10x40x40 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
3 units (6 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$9.05 AUD
$9.05 AUD
Per 2
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
40.00
mm
+/- 0.500
Approx. Overall Length
40.00
mm
+/ - 0.500
Type
2 (Chamfer Both Ends)
1092242 | DP100-040-303-2 --- Dowel Pins - 10x40x40 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-040-303-2 Dowel Pins - 10x40x40 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
40.00
mm
+/- 0.500
Approx. Overall Length
40.00
mm
+/ - 0.500
1092242 | DP100-040-303-2 --- Dowel Pins - 10x40x40 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-040-303-2 Dowel Pins - 10x40x40 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
45.00
mm
+/- 0.500
Approx. Overall Length
45.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1092365 | DP100-045-CH-1 (5 Pcs) --- Dowel Pins - 10x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-045-CH-1 (5 Pcs) Dowel Pins - 10x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$23.41 AUD
$23.41 AUD
Per 5
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
45.00
mm
+/- 0.500
Approx. Overall Length
45.00
mm
+/ - 0.500
1092365 | DP100-045-CH-1 (5 Pcs) --- Dowel Pins - 10x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-045-CH-1 (5 Pcs) Dowel Pins - 10x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$23.41 AUD
$23.41 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
1092462 | DP100-016-303-2 --- Dowel Pins - 10x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-016-303-2 Dowel Pins - 10x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
1092462 | DP100-016-303-2 --- Dowel Pins - 10x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-016-303-2 Dowel Pins - 10x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
50.00
mm
+/- 0.600
Approx. Overall Length
50.00
mm
+/ - 0.600
Type
1 (Chamfer One End)
1092528 | DP100-050-CH-1 (6 Pcs) --- Dowel Pins - 10x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-050-CH-1 (6 Pcs) Dowel Pins - 10x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$29.59 AUD
$29.59 AUD
Per 6
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
50.00
mm
+/- 0.600
Approx. Overall Length
50.00
mm
+/ - 0.600
1092528 | DP100-050-CH-1 (6 Pcs) --- Dowel Pins - 10x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-050-CH-1 (6 Pcs) Dowel Pins - 10x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$29.59 AUD
$29.59 AUD
Per 6
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
50.00
mm
+/- 0.600
Approx. Overall Length
50.00
mm
+/ - 0.600
Type
2 (Chamfer Both Ends)
1092530 | DP100-050-303-2 --- Dowel Pins - 10x50x50 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-050-303-2 Dowel Pins - 10x50x50 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
50.00
mm
+/- 0.600
Approx. Overall Length
50.00
mm
+/ - 0.600
1092530 | DP100-050-303-2 --- Dowel Pins - 10x50x50 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-050-303-2 Dowel Pins - 10x50x50 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
55.00
mm
+/- 0.600
Approx. Overall Length
55.00
mm
+/ - 0.600
Type
1 (Chamfer One End)
1092601 | DP100-055-CH-1 (5 Pcs) --- Dowel Pins - 10x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-055-CH-1 (5 Pcs) Dowel Pins - 10x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$25.59 AUD
$25.59 AUD
Per 5
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
55.00
mm
+/- 0.600
Approx. Overall Length
55.00
mm
+/ - 0.600
1092601 | DP100-055-CH-1 (5 Pcs) --- Dowel Pins - 10x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-055-CH-1 (5 Pcs) Dowel Pins - 10x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$25.59 AUD
$25.59 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
55.00
mm
+/- 0.600
Approx. Overall Length
55.00
mm
+/ - 0.600
Type
2 (Chamfer Both Ends)
1092603 | DP100-055-303-2 --- Dowel Pins - 10x55x55 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-055-303-2 Dowel Pins - 10x55x55 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
55.00
mm
+/- 0.600
Approx. Overall Length
55.00
mm
+/ - 0.600
1092603 | DP100-055-303-2 --- Dowel Pins - 10x55x55 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-055-303-2 Dowel Pins - 10x55x55 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
Type
2 (Chamfer Both Ends)
1092666 | DP100-018-303-2 --- Dowel Pins - 10x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-018-303-2 Dowel Pins - 10x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
1092666 | DP100-018-303-2 --- Dowel Pins - 10x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-018-303-2 Dowel Pins - 10x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
60.00
mm
+/- 0.600
Approx. Overall Length
60.00
mm
+/ - 0.600
Type
1 (Chamfer One End)
1092710 | DP100-060-CH-1 --- Dowel Pins - 10x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-060-CH-1 Dowel Pins - 10x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
308 Available Immediately | Further orders can be expected around Wed, Dec 31, 2025
$7.86 AUD
$7.86 AUD
Each
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
60.00
mm
+/- 0.600
Approx. Overall Length
60.00
mm
+/ - 0.600
1092710 | DP100-060-CH-1 --- Dowel Pins - 10x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-060-CH-1 Dowel Pins - 10x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
308 Available Immediately | Further orders can be expected around Wed, Dec 31, 2025
$7.86 AUD
$7.86 AUD
Each
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
60.00
mm
+/- 0.600
Approx. Overall Length
60.00
mm
+/- 0.600
Type
2 (Chamfer Both Ends)
Dowel Pins - 10x60x60 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-060-303-2 (500 Pcs) Dowel Pins - 10x60x60 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Thu, Jul 10, 2025
$3,349.50 AUD
$3,349.50 AUD
Per 500
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
60.00
mm
+/- 0.600
Approx. Overall Length
60.00
mm
+/- 0.600
Dowel Pins - 10x60x60 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-060-303-2 (500 Pcs) Dowel Pins - 10x60x60 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Thu, Jul 10, 2025
$3,349.50 AUD
$3,349.50 AUD
Per 500
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
70.00
mm
+/- 0.600
Approx. Overall Length
70.00
mm
+/ - 0.600
Type
1 (Chamfer One End)
1092823 | DP100-070-CH-1 (4 Pcs) --- Dowel Pins - 10x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-070-CH-1 (4 Pcs) Dowel Pins - 10x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$23.86 AUD
$23.86 AUD
Per 4
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
70.00
mm
+/- 0.600
Approx. Overall Length
70.00
mm
+/ - 0.600
1092823 | DP100-070-CH-1 (4 Pcs) --- Dowel Pins - 10x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-070-CH-1 (4 Pcs) Dowel Pins - 10x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$23.86 AUD
$23.86 AUD
Per 4
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
80.00
mm
+/- 0.700
Approx. Overall Length
80.00
mm
+/ - 0.700
Type
1 (Chamfer One End)
1092895 | DP100-080-CH-1 (4 Pcs) --- Dowel Pins - 10x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-080-CH-1 (4 Pcs) Dowel Pins - 10x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$28.32 AUD
$28.32 AUD
Per 4
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
80.00
mm
+/- 0.700
Approx. Overall Length
80.00
mm
+/ - 0.700
1092895 | DP100-080-CH-1 (4 Pcs) --- Dowel Pins - 10x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-080-CH-1 (4 Pcs) Dowel Pins - 10x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$28.32 AUD
$28.32 AUD
Per 4
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
80.00
mm
+/- 0.700
Approx. Overall Length
80.00
mm
+/ - 0.700
Type
2 (Chamfer Both Ends)
1092897 | DP100-080-303-2 --- Dowel Pins - 10x80x80 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-080-303-2 Dowel Pins - 10x80x80 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
80.00
mm
+/- 0.700
Approx. Overall Length
80.00
mm
+/ - 0.700
1092897 | DP100-080-303-2 --- Dowel Pins - 10x80x80 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-080-303-2 Dowel Pins - 10x80x80 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
90.00
mm
+/- 0.700
Approx. Overall Length
90.00
mm
+/ - 0.700
Type
1 (Chamfer One End)
1092947 | DP100-090-CH-1 (4 Pcs) --- Dowel Pins - 10x90x90 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-090-CH-1 (4 Pcs) Dowel Pins - 10x90x90 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$30.68 AUD
$30.68 AUD
Per 4
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
90.00
mm
+/- 0.700
Approx. Overall Length
90.00
mm
+/ - 0.700
1092947 | DP100-090-CH-1 (4 Pcs) --- Dowel Pins - 10x90x90 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-090-CH-1 (4 Pcs) Dowel Pins - 10x90x90 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$30.68 AUD
$30.68 AUD
Per 4
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
90.00
mm
+/- 0.700
Approx. Overall Length
90.00
mm
+/ - 0.700
Type
2 (Chamfer Both Ends)
1092948 | DP100-090-303-2 --- Dowel Pins - 10x90x90 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-090-303-2 Dowel Pins - 10x90x90 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
90.00
mm
+/- 0.700
Approx. Overall Length
90.00
mm
+/ - 0.700
1092948 | DP100-090-303-2 --- Dowel Pins - 10x90x90 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-090-303-2 Dowel Pins - 10x90x90 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
100.00
mm
+/- 0.700
Approx. Overall Length
100.00
mm
+/ - 0.700
Type
1 (Chamfer One End)
1092986 | DP100-100-CH-1 (3 Pcs) --- Dowel Pins - 10x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-100-CH-1 (3 Pcs) Dowel Pins - 10x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$28.95 AUD
$28.95 AUD
Per 3
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
100.00
mm
+/- 0.700
Approx. Overall Length
100.00
mm
+/ - 0.700
1092986 | DP100-100-CH-1 (3 Pcs) --- Dowel Pins - 10x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-100-CH-1 (3 Pcs) Dowel Pins - 10x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$28.95 AUD
$28.95 AUD
Per 3
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
120.00
mm
+/- 0.800
Approx. Overall Length
120.00
mm
+/ - 0.800
Type
1 (Chamfer One End)
1093039 | DP100-120-CH-1 (50 Pcs) --- Dowel Pins - 10x120x120 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-120-CH-1 (50 Pcs) Dowel Pins - 10x120x120 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$340.77 AUD
$340.77 AUD
Per 50
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
120.00
mm
+/- 0.800
Approx. Overall Length
120.00
mm
+/ - 0.800
1093039 | DP100-120-CH-1 (50 Pcs) --- Dowel Pins - 10x120x120 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-120-CH-1 (50 Pcs) Dowel Pins - 10x120x120 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jun 29, 2025
$340.77 AUD
$340.77 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
25.00
mm
+/- 0.420
Approx. Overall Length
25.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1093319 | DP100-025-CH-1 (50 Pcs) --- Dowel Pins - 10x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-025-CH-1 (50 Pcs) Dowel Pins - 10x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$92.32 AUD
$92.32 AUD
Per 50
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
25.00
mm
+/- 0.420
Approx. Overall Length
25.00
mm
+/ - 0.420
1093319 | DP100-025-CH-1 (50 Pcs) --- Dowel Pins - 10x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-025-CH-1 (50 Pcs) Dowel Pins - 10x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$92.32 AUD
$92.32 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
35.00
mm
+/- 0.500
Approx. Overall Length
35.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1093888 | DP100-035-CH-1 --- Dowel Pins - 10x35x35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-035-CH-1 Dowel Pins - 10x35x35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
42 Available Immediately | Further orders can be expected around Sun, Jun 29, 2025
$5.77 AUD
$5.77 AUD
Each
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
35.00
mm
+/- 0.500
Approx. Overall Length
35.00
mm
+/ - 0.500
1093888 | DP100-035-CH-1 --- Dowel Pins - 10x35x35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-035-CH-1 Dowel Pins - 10x35x35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
42 Available Immediately | Further orders can be expected around Sun, Jun 29, 2025
$5.77 AUD
$5.77 AUD
Each
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
36.00
mm
+/- 0.500
Approx. Overall Length
36.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1093936 | DP100-036-CH-1 (50 Pcs) --- Dowel Pins - 10x36x36 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-036-CH-1 (50 Pcs) Dowel Pins - 10x36x36 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$202.05 AUD
$202.05 AUD
Per 50
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
36.00
mm
+/- 0.500
Approx. Overall Length
36.00
mm
+/ - 0.500
1093936 | DP100-036-CH-1 (50 Pcs) --- Dowel Pins - 10x36x36 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP100-036-CH-1 (50 Pcs) Dowel Pins - 10x36x36 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$202.05 AUD
$202.05 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
36.00
mm
+/- 0.500
Approx. Overall Length
36.00
mm
+/ - 0.500
Type
2 (Chamfer Both Ends)
1093937 | DP100-036-303-2 --- Dowel Pins - 10x36x36 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-036-303-2 Dowel Pins - 10x36x36 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
10.000
mm
+ 0.007 / + 0.018
Length (L)
36.00
mm
+/- 0.500
Approx. Overall Length
36.00
mm
+/ - 0.500
1093937 | DP100-036-303-2 --- Dowel Pins - 10x36x36 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP100-036-303-2 Dowel Pins - 10x36x36 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity