Pins - Dowel - Standard - Chamfered Ends

689 Products in this selection
This is a combined category of Chamfered Ends Standard Dowel Pins.
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances

Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
A more concise listing may be found on the Smallparts store at Pins - Dowel - Standard - Chamfered Ends. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
60.00
mm
+/- 0.600
(2.362 in.)
Approx. Overall Length
60.00
mm
+/ - 0.600
(2.362 in.)
Type
1 (Chamfer One End)
1068525 | DP060-060-CH-1 (50 Pcs) --- Dowel Pins - 6x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-060-CH-1 (50 Pcs) Dowel Pins - 6x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$150.68 AUD
$150.68 AUD
Per 50
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
60.00
mm
+/- 0.600
(2.362 in.)
Approx. Overall Length
60.00
mm
+/ - 0.600
(2.362 in.)
1068525 | DP060-060-CH-1 (50 Pcs) --- Dowel Pins - 6x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-060-CH-1 (50 Pcs) Dowel Pins - 6x60x60 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$150.68 AUD
$150.68 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
60.00
mm
+/- 0.600
(2.362 in.)
Approx. Overall Length
60.00
mm
+/ - 0.600
(2.362 in.)
Type
2 (Chamfer Both Ends)
1068526 | DP060-060-303-2 --- Dowel Pins - 6x60x60 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP060-060-303-2 Dowel Pins - 6x60x60 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
60.00
mm
+/- 0.600
(2.362 in.)
Approx. Overall Length
60.00
mm
+/ - 0.600
(2.362 in.)
1068526 | DP060-060-303-2 --- Dowel Pins - 6x60x60 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP060-060-303-2 Dowel Pins - 6x60x60 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
70.00
mm
+/- 0.600
(2.756 in.)
Approx. Overall Length
70.00
mm
+/ - 0.600
(2.756 in.)
Type
1 (Chamfer One End)
1068599 | DP060-070-CH-1 (50 Pcs) --- Dowel Pins - 6x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-070-CH-1 (50 Pcs) Dowel Pins - 6x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$248.23 AUD
$248.23 AUD
Per 50
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
70.00
mm
+/- 0.600
(2.756 in.)
Approx. Overall Length
70.00
mm
+/ - 0.600
(2.756 in.)
1068599 | DP060-070-CH-1 (50 Pcs) --- Dowel Pins - 6x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-070-CH-1 (50 Pcs) Dowel Pins - 6x70x70 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$248.23 AUD
$248.23 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
80.00
mm
+/- 0.700
(3.15 in.)
Approx. Overall Length
80.00
mm
+/ - 0.700
(3.15 in.)
Type
1 (Chamfer One End)
1068669 | DP060-080-CH-1 (50 Pcs) --- Dowel Pins - 6x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-080-CH-1 (50 Pcs) Dowel Pins - 6x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jul 03, 2025
$483.77 AUD
$483.77 AUD
Per 50
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
80.00
mm
+/- 0.700
(3.15 in.)
Approx. Overall Length
80.00
mm
+/ - 0.700
(3.15 in.)
1068669 | DP060-080-CH-1 (50 Pcs) --- Dowel Pins - 6x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-080-CH-1 (50 Pcs) Dowel Pins - 6x80x80 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jul 03, 2025
$483.77 AUD
$483.77 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
100.00
mm
+/- 0.700
(3.937 in.)
Approx. Overall Length
100.00
mm
+/ - 0.700
(3.937 in.)
Type
1 (Chamfer One End)
1068744 | DP060-100-CH-1 (5 Pcs) --- Dowel Pins - 6x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-100-CH-1 (5 Pcs) Dowel Pins - 6x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$128.14 AUD
$128.14 AUD
Per 5
Diameter (D)
6.000
mm
+ 0.006 / + 0.015
(0.236 in.)
Length (L)
100.00
mm
+/- 0.700
(3.937 in.)
Approx. Overall Length
100.00
mm
+/ - 0.700
(3.937 in.)
1068744 | DP060-100-CH-1 (5 Pcs) --- Dowel Pins - 6x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP060-100-CH-1 (5 Pcs) Dowel Pins - 6x100x100 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$128.14 AUD
$128.14 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
9.53
mm
+/- 0.254
(0.375 in.)
Approx. Overall Length
9.53
mm
+/ - 0.254
(0.375 in.)
Type
1 (Chamfer One End)
1071154 | DP064-010-CH-1 (50 Pcs) --- Dowel Pins - 6.35x9.53x9.53 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-010-CH-1 (50 Pcs) Dowel Pins - 6.35x9.53x9.53 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jul 13, 2025
$60.86 AUD
$60.86 AUD
Per 50
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
9.53
mm
+/- 0.254
(0.375 in.)
Approx. Overall Length
9.53
mm
+/ - 0.254
(0.375 in.)
1071154 | DP064-010-CH-1 (50 Pcs) --- Dowel Pins - 6.35x9.53x9.53 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-010-CH-1 (50 Pcs) Dowel Pins - 6.35x9.53x9.53 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jul 13, 2025
$60.86 AUD
$60.86 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
12.70
mm
+/- 0.350
(0.5 in.)
Approx. Overall Length
12.70
mm
+/ - 0.350
(0.5 in.)
Type
1 (Chamfer One End)
1071601 | DP064-013-303-1 (10 Pcs) --- Dowel Pins - 6.35x12.7x12.7 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-013-303-1 (10 Pcs) Dowel Pins - 6.35x12.7x12.7 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
3 units (30 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 10
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
12.70
mm
+/- 0.350
(0.5 in.)
Approx. Overall Length
12.70
mm
+/ - 0.350
(0.5 in.)
1071601 | DP064-013-303-1 (10 Pcs) --- Dowel Pins - 6.35x12.7x12.7 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-013-303-1 (10 Pcs) Dowel Pins - 6.35x12.7x12.7 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
3 units (30 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 10
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
12.70
mm
+/- 0.350
(0.5 in.)
Approx. Overall Length
12.70
mm
+/ - 0.350
(0.5 in.)
Type
1 (Chamfer One End)
1071603 | DP064-013-CH-1 (5 Pcs) --- Dowel Pins - 6.35x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-013-CH-1 (5 Pcs) Dowel Pins - 6.35x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
69 units (345 pcs) Available Immediately | Further orders can be expected around Sun, Jul 13, 2025
$5.77 AUD
$6.93 AUD $5.77 AUD
Per 5
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
12.70
mm
+/- 0.350
(0.5 in.)
Approx. Overall Length
12.70
mm
+/ - 0.350
(0.5 in.)
1071603 | DP064-013-CH-1 (5 Pcs) --- Dowel Pins - 6.35x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-013-CH-1 (5 Pcs) Dowel Pins - 6.35x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
69 units (345 pcs) Available Immediately | Further orders can be expected around Sun, Jul 13, 2025
$5.77 AUD
$6.93 AUD $5.77 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
15.88
mm
+/- 0.350
(0.625 in.)
Approx. Overall Length
15.88
mm
+/ - 0.350
(0.625 in.)
Type
1 (Chamfer One End)
1071997 | DP064-016-303-1 (15 Pcs) --- Dowel Pins - 6.35x15.88x15.88 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-016-303-1 (15 Pcs) Dowel Pins - 6.35x15.88x15.88 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
15.88
mm
+/- 0.350
(0.625 in.)
Approx. Overall Length
15.88
mm
+/ - 0.350
(0.625 in.)
1071997 | DP064-016-303-1 (15 Pcs) --- Dowel Pins - 6.35x15.88x15.88 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-016-303-1 (15 Pcs) Dowel Pins - 6.35x15.88x15.88 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
15.88
mm
+/- 0.350
(0.625 in.)
Approx. Overall Length
15.88
mm
+/ - 0.350
(0.625 in.)
Type
1 (Chamfer One End)
1071998 | DP064-016-CH-1 --- Dowel Pins - 6.35x15.88x15.88 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-016-CH-1 Dowel Pins - 6.35x15.88x15.88 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
63 Available Immediately | Further orders can be expected around Sun, Jul 13, 2025
$1.41 AUD
$1.41 AUD
Each
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
15.88
mm
+/- 0.350
(0.625 in.)
Approx. Overall Length
15.88
mm
+/ - 0.350
(0.625 in.)
1071998 | DP064-016-CH-1 --- Dowel Pins - 6.35x15.88x15.88 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-016-CH-1 Dowel Pins - 6.35x15.88x15.88 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
63 Available Immediately | Further orders can be expected around Sun, Jul 13, 2025
$1.41 AUD
$1.41 AUD
Each
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
Type
1 (Chamfer One End)
1072207 | DP064-019-303-1 --- Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-019-303-1 Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
1072207 | DP064-019-303-1 --- Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-019-303-1 Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
Type
1 (Chamfer One End)
1072208 | DP064-019-416-1 (25 Pcs) --- Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP064-019-416-1 (25 Pcs) Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
1 pack (25 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Per 25
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
1072208 | DP064-019-416-1 (25 Pcs) --- Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP064-019-416-1 (25 Pcs) Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
1 pack (25 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Per 25
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
Type
1 (Chamfer One End)
1072209 | DP064-019-CH-1 (2 Pcs) --- Dowel Pins - 6.35x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-019-CH-1 (2 Pcs) Dowel Pins - 6.35x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
20 units (40 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.06 AUD
$6.08 AUD $5.06 AUD
Per 2
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
1072209 | DP064-019-CH-1 (2 Pcs) --- Dowel Pins - 6.35x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-019-CH-1 (2 Pcs) Dowel Pins - 6.35x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
20 units (40 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.06 AUD
$6.08 AUD $5.06 AUD
Per 2
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
Type
1 (Chamfer One End)
1072210 | DP064-191-416-1 (3 Pcs) --- Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP064-191-416-1 (3 Pcs) Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$11.32 AUD
$11.32 AUD
Per 3
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
19.05
mm
+/- 0.420
(0.75 in.)
Approx. Overall Length
19.05
mm
+/ - 0.420
(0.75 in.)
1072210 | DP064-191-416-1 (3 Pcs) --- Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP064-191-416-1 (3 Pcs) Dowel Pins - 6.35x19.05x19.05 mm - Stainless Steel AISI 416 Rc 36-42
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$11.32 AUD
$11.32 AUD
Per 3
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
22.23
mm
+/- 0.420
(0.875 in.)
Approx. Overall Length
22.23
mm
+/ - 0.420
(0.875 in.)
Type
1 (Chamfer One End)
1072365 | DP064-022-303-1 --- Dowel Pins - 6.35x22.23x22.23 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-022-303-1 Dowel Pins - 6.35x22.23x22.23 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
22.23
mm
+/- 0.420
(0.875 in.)
Approx. Overall Length
22.23
mm
+/ - 0.420
(0.875 in.)
1072365 | DP064-022-303-1 --- Dowel Pins - 6.35x22.23x22.23 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-022-303-1 Dowel Pins - 6.35x22.23x22.23 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
22.23
mm
+/- 0.420
(0.875 in.)
Approx. Overall Length
22.23
mm
+/ - 0.420
(0.875 in.)
Type
1 (Chamfer One End)
1072366 | DP064-022-CH-1 --- Dowel Pins - 6.35x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-022-CH-1 Dowel Pins - 6.35x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
74 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.34 AUD
$4.00 AUD $3.34 AUD
Each
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
22.23
mm
+/- 0.420
(0.875 in.)
Approx. Overall Length
22.23
mm
+/ - 0.420
(0.875 in.)
1072366 | DP064-022-CH-1 --- Dowel Pins - 6.35x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-022-CH-1 Dowel Pins - 6.35x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
74 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.34 AUD
$4.00 AUD $3.34 AUD
Each
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
25.40
mm
+/- 0.420
(1 in.)
Approx. Overall Length
25.40
mm
+/ - 0.420
(1 in.)
Type
1 (Chamfer One End)
1072540 | DP064-025-303-1 (2 Pcs) --- Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-025-303-1 (2 Pcs) Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
33 units (66 pcs) Available Immediately | Further orders can be expected around Mon, Jun 09, 2025
$4.77 AUD
$4.77 AUD
Per 2
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
25.40
mm
+/- 0.420
(1 in.)
Approx. Overall Length
25.40
mm
+/ - 0.420
(1 in.)
1072540 | DP064-025-303-1 (2 Pcs) --- Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-025-303-1 (2 Pcs) Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
33 units (66 pcs) Available Immediately | Further orders can be expected around Mon, Jun 09, 2025
$4.77 AUD
$4.77 AUD
Per 2
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
25.40
mm
+/- 0.420
(1 in.)
Approx. Overall Length
25.40
mm
+/ - 0.420
(1 in.)
Type
1 (Chamfer One End)
1072542 | DP064-025-CH-1 (5 Pcs) --- Dowel Pins - 6.35x25.4x25.4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-025-CH-1 (5 Pcs) Dowel Pins - 6.35x25.4x25.4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
30 units (150 pcs) Available Immediately | Further orders can be expected around Mon, Jun 09, 2025
$3.95 AUD
$3.95 AUD
Per 5
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
25.40
mm
+/- 0.420
(1 in.)
Approx. Overall Length
25.40
mm
+/ - 0.420
(1 in.)
1072542 | DP064-025-CH-1 (5 Pcs) --- Dowel Pins - 6.35x25.4x25.4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-025-CH-1 (5 Pcs) Dowel Pins - 6.35x25.4x25.4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
30 units (150 pcs) Available Immediately | Further orders can be expected around Mon, Jun 09, 2025
$3.95 AUD
$3.95 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
25.40
mm
+/- 0.420
(1 in.)
Approx. Overall Length
25.40
mm
+/ - 0.420
(1 in.)
Type
1 (Chamfer One End)
1072543 | DP064-254-416-1 (3 Pcs) --- Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP064-254-416-1 (3 Pcs) Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel AISI 416 Rc 36-42
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$12.95 AUD
$12.95 AUD
Per 3
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
25.40
mm
+/- 0.420
(1 in.)
Approx. Overall Length
25.40
mm
+/ - 0.420
(1 in.)
1072543 | DP064-254-416-1 (3 Pcs) --- Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP064-254-416-1 (3 Pcs) Dowel Pins - 6.35x25.4x25.4 mm - Stainless Steel AISI 416 Rc 36-42
Out of Stock | Backorder Now | Orders can be expected around Mon, Jun 09, 2025
$12.95 AUD
$12.95 AUD
Per 3
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
28.58
mm
+/- 0.420
(1.125 in.)
Approx. Overall Length
28.58
mm
+/ - 0.420
(1.125 in.)
Type
1 (Chamfer One End)
1072638 | DP064-029-CH-1 --- Dowel Pins - 6.35x28.58x28.58 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-029-CH-1 Dowel Pins - 6.35x28.58x28.58 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
28.58
mm
+/- 0.420
(1.125 in.)
Approx. Overall Length
28.58
mm
+/ - 0.420
(1.125 in.)
1072638 | DP064-029-CH-1 --- Dowel Pins - 6.35x28.58x28.58 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-029-CH-1 Dowel Pins - 6.35x28.58x28.58 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
31.75
mm
+/- 0.500
(1.25 in.)
Approx. Overall Length
31.75
mm
+/ - 0.500
(1.25 in.)
Type
1 (Chamfer One End)
1072738 | DP064-032-CH-1 (50 Pcs) --- Dowel Pins - 6.35x31.75x31.75 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-032-CH-1 (50 Pcs) Dowel Pins - 6.35x31.75x31.75 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jul 13, 2025
$91.05 AUD
$91.05 AUD
Per 50
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
31.75
mm
+/- 0.500
(1.25 in.)
Approx. Overall Length
31.75
mm
+/ - 0.500
(1.25 in.)
1072738 | DP064-032-CH-1 (50 Pcs) --- Dowel Pins - 6.35x31.75x31.75 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-032-CH-1 (50 Pcs) Dowel Pins - 6.35x31.75x31.75 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jul 13, 2025
$91.05 AUD
$91.05 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
31.75
mm
+/- 0.500
(1.25 in.)
Approx. Overall Length
31.75
mm
+/ - 0.500
(1.25 in.)
Type
1 (Chamfer One End)
1072740 | DP064-032-303-1 --- Dowel Pins - 6.35x31.75x31.75 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-032-303-1 Dowel Pins - 6.35x31.75x31.75 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
31.75
mm
+/- 0.500
(1.25 in.)
Approx. Overall Length
31.75
mm
+/ - 0.500
(1.25 in.)
1072740 | DP064-032-303-1 --- Dowel Pins - 6.35x31.75x31.75 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP064-032-303-1 Dowel Pins - 6.35x31.75x31.75 mm - Stainless Steel 303/304 Similar to A2, 18-8 HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
34.93
mm
+/- 0.500
(1.375 in.)
Approx. Overall Length
34.93
mm
+/ - 0.500
(1.375 in.)
Type
1 (Chamfer One End)
1072882 | DP064-035-CH-1 (5 Pcs) --- Dowel Pins - 6.35x34.93x34.93 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-035-CH-1 (5 Pcs) Dowel Pins - 6.35x34.93x34.93 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
128 units (640 pcs) Available Immediately | Further orders can be expected around Mon, May 11, 2026
$5.32 AUD
$5.32 AUD
Per 5
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
34.93
mm
+/- 0.500
(1.375 in.)
Approx. Overall Length
34.93
mm
+/ - 0.500
(1.375 in.)
1072882 | DP064-035-CH-1 (5 Pcs) --- Dowel Pins - 6.35x34.93x34.93 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-035-CH-1 (5 Pcs) Dowel Pins - 6.35x34.93x34.93 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
128 units (640 pcs) Available Immediately | Further orders can be expected around Mon, May 11, 2026
$5.32 AUD
$5.32 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
38.10
mm
+/- 0.500
(1.5 in.)
Approx. Overall Length
38.10
mm
+/ - 0.500
(1.5 in.)
Type
1 (Chamfer One End)
1072975 | DP064-038-CH-1 (50 Pcs) --- Dowel Pins - 6.35x38.1x38.1 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-038-CH-1 (50 Pcs) Dowel Pins - 6.35x38.1x38.1 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jul 13, 2025
$97.41 AUD
$97.41 AUD
Per 50
Diameter (D)
6.350
mm
+ 0.006 / + 0.015
(0.25 in.)
Length (L)
38.10
mm
+/- 0.500
(1.5 in.)
Approx. Overall Length
38.10
mm
+/ - 0.500
(1.5 in.)
1072975 | DP064-038-CH-1 (50 Pcs) --- Dowel Pins - 6.35x38.1x38.1 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP064-038-CH-1 (50 Pcs) Dowel Pins - 6.35x38.1x38.1 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Sun, Jul 13, 2025
$97.41 AUD
$97.41 AUD
Per 50
View the product page first if you are unsure.