Minibearings Torlon - Materials - Technical Information

QUICK SITE LINKS

Minibearings Torlon - Materials - Technical Information

Torlon 4301

MBA Products made from this material
Balls, High speed bearing cages

Torlon® 4301 extruded PAI is primarily used for wear and friction parts. It has a low expansion rate and coefficient of friction and it exhibits very little friction in use. A flexural modulus of 1,000,000 psi is higher than most other advanced engineering plastics. This grade excels in severe service wear applications such as non-lubricated bearings, balls and bearing cages.

Properties of Torlon 4301

Physical Properties
PROPERTY	UNIT	VALUE
Density	g/cm³	1.45
Surface Hardness	Rockwell E	70
Tensile Strength	MPa	82
Flexural Modulus	GPa	5.5
Notched Izod	ft-lb/in	0.8
Linear Expansion	per ^oC	x 0.000009
Max Operating Temp.	^oC	260
Water Absorption	% over 24 hrs	0.4
Flammability	UL94	V-0
Volume Resistivity	ohm.cm at 50% RH	10¹³
Dissipation Factor	@ 1MHz	0.037
Dielectric Constant	@ 1MHz	6.0
Heat Deflection Temp. @ 0.45 MPa	^oC	200
Heat Deflection Temp. @ 1.80 MPa	^oC	279

Chemical Resistance
Chemical	Resistance
Acids (Concentrated)	Good
Acids (Dilute)	Good
Alkalis	Poor-Fair

Note! Property values are typical and should be used only as a guide to selection of materials and not as purchase specifications.

Balls can be found here in the MBA online catalogue.

High speed bearings can be found here in the MBA online catalogue.

You can purchase MBA product from any of our Distributors or online from Small Parts and Bearings.

Resellers can log into their accounts on the MBA web site.

Miniature Bearings Main Pages

Technical Index

Product Technical Information

Balls	Bearings	Couplings
Pins	Shafting	Timing Belts and Pulleys

Other Technical Information

Basic Information Sheets	Catalogues	Glossary of Technical Terms
Links to Further Information	Materials Information	Measurement Conversions
Skate Bearing FAQ	Technical Information Sheets

Tables and information on this web site should be read as a general guide only. The relevant standards should be consulted to ensure accuracy

There are no further parts to this document.

MBA Terms and Conditions of Sale

MBA Freight Rates

Site Summary:

Miniature Bearings Australia offers over 100,000 products including small bearings, timing pulleys, timing belts, seals, o-rings, gears etc - see the full listing in the Online Catalogue. Our main business is through resellers including the online only distributor Small Parts and Bearings and the counter sales distributor H.E. Supplies (Hobby Engineering Supplies). Small Parts and Bearings online sales are located within our building in Dividend Street Mansfield. H.E. Supplies are located just around the corner at 186 Wecker Road Mansfield. There are many other distributors located throughout Australia and Worldwide so there are hundreds of places to buy our product. Using the links at the top of this page you will find extensive information including catalogues (Products and Store link), technical data, and other product specific information.

We sell our product worldwide through distributors. If you are a distributor of mechanical parts such as bearings and power transmission products, and you have an interest in becoming a distributor for Miniature Bearings Australia in your area/country please contact sales@minibearings.com.au with information about your company. Miniature Bearings Australia are a wholesale and OEM supply company only. There are some foreign language introductory pages in French, German, Italian, Chinese, Japanese, Spanish and Portuguese available on our site.

If you wish to purchase product online, the Small Parts and Bearings online store is linked directly to the Miniature Bearings Australia online catalogue, so all new MBA products are added automatically to their store. Recent additions include full ceramic bearings in Silicon Nitride and Zirconia, and ceramic hybrid bearings for pushbikes and other applications. New products are being added every week. We also suggest that you may want to take a look at the technical information sites - Shafting Information, Couplings Information, Gearboxes Information and General Engineering Parts Information.

If you haven't found it, you probably haven't tried MBA