Washers Square Categories (Stocked Items Only)


Category Matches

Bearings Thrust

TopHide Pictures

Washers - Self Aligning - Sets - Plastic
Washers - Self Aligning - Sets - Plastic

Search Rating: 100%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Sets - Plastic.

Washers Thrust

TopHide Pictures

Washers - Thrust - DP4 Type
Washers - Thrust - DP4 Type

Search Rating: 100%

Also see combined categories:
All Thrust Washers

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Thrust - DP4 Type.

Springs Disc

TopHide Pictures

Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Search Rating: 100%

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Also known as belleville washers.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Ball Bearing Type.

Washers - Disc Spring - Carbon Steel
Washers - Disc Spring - Carbon Steel

Search Rating: 100%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Carbon Steel.

Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Search Rating: 100%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Plastic.

Washers - Disc Spring - Stainless Steel
Washers - Disc Spring - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disc Spring - Stainless Steel.

Spring Washers

TopHide Pictures

Washers - Spring - 2 Wave Type
Washers - Spring - 2 Wave Type

Search Rating: 100%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - 2 Wave Type.

Washers - Spring - 3 Wave Type - 302 Stainless Steel
Washers - Spring - 3 Wave Type - 302 Stainless Steel

Search Rating: 100%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - 3 Wave Type - 302 Stainless Steel.

Washers - Spring - 3 Wave Type - 400 Grade Stainless
Washers - Spring - 3 Wave Type - 400 Grade Stainless

Search Rating: 100%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - 3 Wave Type - 400 Grade Stainless.

Washers - Spring - 3 Wave Type - Berryllium Copper
Washers - Spring - 3 Wave Type - Berryllium Copper

Search Rating: 100%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - 3 Wave Type - Berryllium Copper.

Washers - Spring - 3 Wave Type - Carbon Steel
Washers - Spring - 3 Wave Type - Carbon Steel

Search Rating: 100%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - 3 Wave Type - Carbon Steel.

Washers - Spring - Curved - Carbon Steel
Washers - Spring - Curved - Carbon Steel

Search Rating: 100%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - Curved - Carbon Steel.

Washers - Spring - Curved - Stainless Steel
Washers - Spring - Curved - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Spring - Curved - Stainless Steel.

Washers Aligning

TopHide Pictures

Washers - Self Aligning - Components - Hardened Steel
Washers - Self Aligning - Components - Hardened Steel

Search Rating: 100%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Components - Hardened Steel.

Washers - Self Aligning - Components - Stainless Steel
Washers - Self Aligning - Components - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Components - Stainless Steel.

Washers - Self Aligning - Sets - Hardened Steel
Washers - Self Aligning - Sets - Hardened Steel

Search Rating: 100%

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Self Aligning - Sets - Hardened Steel.

Washers Finishing

TopHide Pictures

Washers - Cup - Nylon
Washers - Cup - Nylon

Search Rating: 100%

Also see combined categories:
All Cup Washers

Countersunk washers for use with screws for decorative finishing


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Cup - Nylon.

Washers - Cup - Stainless Steel
Washers - Cup - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Cup Washers

For countersunk screws.

Stainless Steel cup washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Cup - Stainless Steel.

Washers Flat Fibre

TopHide Pictures

Washers - Flat - Fibre
Washers - Flat - Fibre

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 oC. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Fibre.

Washers Flat Metallic

TopHide Pictures

Washers - Flat - Aluminium
Washers - Flat - Aluminium

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Aluminium.

Washers - Flat - Brass - Commercial
Washers - Flat - Brass - Commercial

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Brass - Commercial.

Washers - Flat - Brass - Precision
Washers - Flat - Brass - Precision

Search Rating: 100%

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Precision Tolerances. Laminated brass shim washers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Brass - Precision.

Washers - Flat - Carbon Spring Steel - Precision Shim
Washers - Flat - Carbon Spring Steel - Precision Shim

Search Rating: 100%

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Carbon Spring Steel - Precision Shim.

Washers - Flat - High Tensile
Washers - Flat - High Tensile

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Grade 8 high tensile washers

ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - High Tensile.

Washers - Flat - Mild Steel
Washers - Flat - Mild Steel

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Mild Steel.

Washers - Flat - Sintered Bronze - Precision
Washers - Flat - Sintered Bronze - Precision

Search Rating: 100%

Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat thrust washers made from oil impregnated sintered bronze


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Sintered Bronze - Precision.

Washers - Flat - Stainless Steel 304 - Commercial
Washers - Flat - Stainless Steel 304 - Commercial

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel 304 - Commercial.

Washers - Flat - Stainless Steel 316 - Commercial
Washers - Flat - Stainless Steel 316 - Commercial

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel 316 - Commercial.

Washers - Flat - Stainless Steel - Precision Shim
Washers - Flat - Stainless Steel - Precision Shim

Search Rating: 100%

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Precision Tolerances.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stainless Steel - Precision Shim.

Washers - Flat - Stamped - Heavy Duty - Hardened
Washers - Flat - Stamped - Heavy Duty - Hardened

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Heat treated. Black oxide finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Stamped - Heavy Duty - Hardened.

Washers - Flat - Titanium - CP Grade 1
Washers - Flat - Titanium - CP Grade 1

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Titanium - CP Grade 1.

Washers - Heavy Duty - Machined - Stainless Steel
Washers - Heavy Duty - Machined - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Flat Washers and Spacers - Metallic

303 Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Heavy Duty - Machined - Stainless Steel.

Washers Flat Plastic

TopHide Pictures

Washers - Flat - Nylon
Washers - Flat - Nylon

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Nylon.

Washers - Flat - PTFE
Washers - Flat - PTFE

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Teflon Washers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - PTFE.

Washers - Flat - PVC
Washers - Flat - PVC

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat washers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - PVC.

Washers Flat Rubber

TopHide Pictures

Washers - Flat - Rubber
Washers - Flat - Rubber

Search Rating: 100%

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Nitrile Duro 70


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Flat - Rubber.

Washers Lock

TopHide Pictures

Washers - Lock - External Tooth - Spring Steel
Washers - Lock - External Tooth - Spring Steel

Search Rating: 100%

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - External Tooth - Spring Steel.

Washers - Lock - External Tooth - Stainless Steel
Washers - Lock - External Tooth - Stainless Steel

Search Rating: 100%

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - External Tooth - Stainless Steel.

Washers - Lock - Internal Tooth - Spring Steel
Washers - Lock - Internal Tooth - Spring Steel

Search Rating: 100%

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Internal Tooth - Spring Steel.

Washers - Lock - Internal Tooth - Stainless Steel
Washers - Lock - Internal Tooth - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Internal Tooth - Stainless Steel.

Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Search Rating: 100%

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Split - Stainless Steel.

Washers - Lock - Split - Steel
Washers - Lock - Split - Steel

Search Rating: 100%

Also see combined categories:
All Split Lock Washers
All Lock Washers

Plain and zinc plated

Dimensions are nominal and may vary between batches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Split - Steel.

Washers - Lock - Split - Titanium CP Grade 1
Washers - Lock - Split - Titanium CP Grade 1

Search Rating: 100%

Also see combined categories:
All Split Lock Washers
All Lock Washers

CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Dimensions are nominal and may vary between batches. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Split - Titanium CP Grade 1.

Washers - Lock - Tabbed - Heavy Duty
Washers - Lock - Tabbed - Heavy Duty

Search Rating: 100%

Also see combined categories:
All Tabbed Lock Washers
All Lock Washers

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Lock - Tabbed - Heavy Duty.

Washers Locking

TopHide Pictures

Washers - Serrated - Safety
Washers - Serrated - Safety

Search Rating: 100%

Also see combined categories:
All Serrated Locking Washers

Spring Steel Hardened Black.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Serrated - Safety.

Washers Serrated Locking

TopHide Pictures

Washers - Disk Lock
Washers - Disk Lock

Search Rating: 100%

Also see combined categories:
All Serrated Locking Washers
All Lock Washers

Also see Nord Lock and Lockrite washers

Stainless Grade Grade A2 302/316 18-8. Vibration-proof self tightening structural locking device. Maximum Working Temp: +430oC. DISC-LOCK(R) has outperformed all other types of loose, washered, threaded or pinned systems. in a wide range of high stress, corrosive, and vibration sensitive applications.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Disk Lock.

Washers - LockRite - Corrosion Resistant
Washers - LockRite - Corrosion Resistant

Search Rating: 100%

Also see combined categories:
All Serrated Locking Washers
All Lock Washers

Supplied in pairs. With Delta Protekt coating.

Also see Nordlock and Disk Lock washers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - LockRite - Corrosion Resistant.

Washers - Nord Lock - 316 Stainless
Washers - Nord Lock - 316 Stainless

Search Rating: 100%

Also see combined categories:
All Serrated Locking Washers
All Lock Washers

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Nord Lock - 316 Stainless.

Washers - Nord Lock - Zinc Plated
Washers - Nord Lock - Zinc Plated

Search Rating: 100%

Also see combined categories:
All Serrated Locking Washers
All Lock Washers

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Nord Lock - Zinc Plated.

Washers Shoulder

TopHide Pictures

Washers - Shoulder - Nylon
Washers - Shoulder - Nylon

Search Rating: 100%

Also see combined categories:
All Shoulder Washers


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Shoulder - Nylon.

Hoist Rings

TopHide Pictures

Washers - Bevel
Washers - Bevel

Search Rating: 100%

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Washers - Bevel.

Bar and Rod

TopHide Pictures

Square Bar - Brass
Square Bar - Brass

Search Rating: 100%

Also see combined categories:
All Metal Bar - Square

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Square Bar - Brass.

Nuts Specialty

TopHide Pictures

Nuts - Square - Machine Screw
Nuts - Square - Machine Screw

Search Rating: 99%

For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Nuts - Square - Machine Screw.

Washers General

TopHide Pictures

Hobby - Washer Packs
Hobby - Washer Packs

Search Rating: 99%

Hobby Washer Packs. Includes Dubro Range


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Hobby - Washer Packs.

Bungs

TopHide Pictures

Bungs - Square
Bungs - Square

Search Rating: 99%

Plastic bungs fit inside square tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bungs - Square.

Tube and Tubing

TopHide Pictures

Tube - Square - Aluminium
Tube - Square - Aluminium

Search Rating: 99%

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tube - Square - Aluminium.

Tube - Square - Brass
Tube - Square - Brass

Search Rating: 99%

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tube - Square - Brass.

Tube - Square - Carbon Fibre - Round Hole
Tube - Square - Carbon Fibre - Round Hole

Search Rating: 99%

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tube - Square - Carbon Fibre - Round Hole.

Tube - Square - Carbon Fibre - Square Hole
Tube - Square - Carbon Fibre - Square Hole

Search Rating: 99%

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tube - Square - Carbon Fibre - Square Hole.

Screws Hex Head

TopHide Pictures

Screws - Hex Washer Head - Black Nylon
Screws - Hex Washer Head - Black Nylon

Search Rating: 99%

Also see combined categories:
All Machine Screws
All Plastic Screws

1/4 UNC and UNF only

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Hex Washer Head - Black Nylon.

Keys and Keysteel

TopHide Pictures

Keysteel Lengths - Square - Brass
Keysteel Lengths - Square - Brass

Search Rating: 99%

Also see combined categories:
All Keysteel Lengths

Brass key steel


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Square - Brass.

Keysteel Lengths - Square - Carbon Steel
Keysteel Lengths - Square - Carbon Steel

Search Rating: 99%

Also see combined categories:
All Keysteel Lengths

Plain carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Square - Carbon Steel.

Keysteel Lengths - Square - Stainless Steel
Keysteel Lengths - Square - Stainless Steel

Search Rating: 99%

Also see combined categories:
All Keysteel Lengths

303, 304 and 316 grade key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Square - Stainless Steel.

Keysteel Lengths - Square - Zinc Plated
Keysteel Lengths - Square - Zinc Plated

Search Rating: 99%

Also see combined categories:
All Keysteel Lengths

Zinc plated carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keysteel Lengths - Square - Zinc Plated.

Mounts Cylindrical

TopHide Pictures

Mounts - Cylindrical - Square
Mounts - Cylindrical - Square

Search Rating: 99%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Cylindrical - Square.

Bearings and Housings Insert

TopHide Pictures

Housings - Bearing - Flanged - Square - Cast Iron
Housings - Bearing - Flanged - Square - Cast Iron

Search Rating: 98%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Flanged - Square - Cast Iron.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Washers Only - Chrome Steel
Bearings - Thrust - Ball - Washers Only - Chrome Steel

Search Rating: 98%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Carbon Steel Washers are hardened to RC59.61.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Chrome Steel.

Bearings - Thrust - Ball - Washers Only - Stainless Steel
Bearings - Thrust - Ball - Washers Only - Stainless Steel

Search Rating: 98%

Also see combined categories:
All Ball Thrust Bearing Components

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Washers Only - Stainless Steel.

Bearings - Thrust - Roller - Washers
Bearings - Thrust - Roller - Washers

Search Rating: 98%

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Roller - Washers.

Housings with Bearing

TopHide Pictures

Housings - Bearing - Flanged - Square - W300
Housings - Bearing - Flanged - Square - W300

Search Rating: 98%

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Housings - Bearing - Flanged - Square - W300.

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Washer Face - Brass
Screws - Thumb - Knurled - Washer Face - Brass

Search Rating: 98%

Also see combined categories:
All Thumb Screws

Knurled head brass thumb screws with an integral washer


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Washer Face - Brass.

Screws - Thumb - Knurled - Washer Face - Nylon
Screws - Thumb - Knurled - Washer Face - Nylon

Search Rating: 98%

Also see combined categories:
All Thumb Screws

Knurled head nylon thumb screws with an integral washer


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Washer Face - Nylon.

Screws - Thumb - Knurled - Washer Face - Stainless Steel
Screws - Thumb - Knurled - Washer Face - Stainless Steel

Search Rating: 98%

Also see combined categories:
All Thumb Screws

Knurled head stainless steel thumb screws with an integral washer


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Knurled - Washer Face - Stainless Steel.

Screws - Thumb - Flat Key Head - Washer Face - Steel
Screws - Thumb - Flat Key Head - Washer Face - Steel

Search Rating: 96%

Also see combined categories:
All Thumb Screws

Flat Key head malleable iron screws with an integral washer


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Screws - Thumb - Flat Key Head - Washer Face - Steel.

Pins Wirelock

TopHide Pictures

Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel
Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Search Rating: 96%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel.

Spacers

TopHide Pictures

Spacers - Arbor
Spacers - Arbor

Search Rating: 96%

Flat arbor shim washers with keyway groove.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Spacers - Arbor.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Roller - Cage and Rollers Only
Bearings - Thrust - Roller - Cage and Rollers Only

Search Rating: 94%

Also see combined categories:
All Roller Thrust Cages and Washers

Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Roller - Cage and Rollers Only.

Keys and Keysteel

TopHide Pictures

Keys - Machine - Carbon Steel
Keys - Machine - Carbon Steel

Search Rating: 91%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keys - Machine - Carbon Steel.

Keys - Machine - Stainless Steel
Keys - Machine - Stainless Steel

Search Rating: 91%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Keys - Machine - Stainless Steel.

Bearings Thrust

TopHide Pictures

Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Search Rating: 89%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Chrome Steel.

Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Search Rating: 89%

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bearings - Thrust - Ball - Flat - Stainless Steel.

Assortments

TopHide Pictures

Assortment Kits - Various
Assortment Kits - Various

Search Rating: 88%

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Assortment Kits - Various. If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Assortment Kits - Various.

Springs Die

TopHide Pictures

Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Search Rating: 86%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Springs - Die - Imperial - Heavy Duty.

Clamps

TopHide Pictures

Clamp Kits - Timing Belt
Clamp Kits - Timing Belt

Search Rating: 80%

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Clamp Kits - Timing Belt.

Snap Buttons

TopHide Pictures

Snap Buttons - Double End
Snap Buttons - Double End

Search Rating: 73%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snap Buttons - Double End.

Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Search Rating: 71%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snap Buttons - Single End - Dog Leg.

Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Search Rating: 71%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Snap Buttons - Single End - Spring Leg.

Pins Dowel

TopHide Pictures

Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Search Rating: 49%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Hammer Drive - Round Head - Stainless Steel.

Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Search Rating: 38%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Pins - Hammer Drive - Flat Head.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 120804 products in 2845 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.