Tooling Balls Categories
Category Matches
Tooling Balls
TopHide PicturesBalls - Tooling - One Piece - Construction - Stainless Steel
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 440C Stainless Steel heat treated to 55-58 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Construction - Stainless Steel on Small Parts and Bearings.
Balls - Tooling - One Piece - Construction - Steel
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Construction - Steel on Small Parts and Bearings.
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit on Small Parts and Bearings.
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit on Small Parts and Bearings.
Balls - Tooling - One Piece - Shoulder - Steel - Press Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Steel - Press Fit on Small Parts and Bearings.
Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit on Small Parts and Bearings.
Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
440C Stainless Steel heat treated to 55-58 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit on Small Parts and Bearings.
Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
440C Stainless Steel heat treated to 55-58 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit on Small Parts and Bearings.
Balls - Tooling - One Piece - Standard - Steel - Press Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
1144 steel heat treated to 53-57 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Steel - Press Fit on Small Parts and Bearings.
Balls - Tooling - One Piece - Standard - Steel - Slip Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
1144 steel heat treated to 53-57 RC.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - One Piece - Standard - Steel - Slip Fit on Small Parts and Bearings.
Balls - Tooling - Two Piece - Construction - Steel
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. Construction balls can be pulled into a hole or bushing from below without applying pressure on the ball by using a cap screw in the internally tapped shank.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Construction - Steel on Small Parts and Bearings.
Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. Knurled shoulder. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Shoulder - Steel - Press Fit on Small Parts and Bearings.
Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. Knurled shoulder. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Shoulder - Steel - Slip Fit on Small Parts and Bearings.
Balls - Tooling - Two Piece - Standard - Steel - Press Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Standard - Steel - Press Fit on Small Parts and Bearings.
Balls - Tooling - Two Piece - Standard - Steel - Slip Fit
Search Rating: 100%
Also see combined categories:
All Tooling Balls
All Standard Tooling Balls
High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.
1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Tooling - Two Piece - Standard - Steel - Slip Fit on Small Parts and Bearings.
Balls - Inspection
Search Rating: 100%
Also see combined categories:
All Fixture and Checking Balls
Premium short shank inspection balls are used as reference points for inspection applications in conjunction with coordinate measuring machines to accurately measure the workpiece.
Made from case hardened 8620 steel. Concentricity of ball to shank is 0.00254mm (0.0001 in.) TIR.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Inspection on Small Parts and Bearings.
Balls - Checking - Stainless Steel
Search Rating: 99%
Also see combined categories:
All Fixture and Checking Balls
440C Hardened to RC 55-58.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Checking - Stainless Steel on Small Parts and Bearings.
Balls - Checking - Tungsten Carbide
Search Rating: 99%
Also see combined categories:
All Fixture and Checking Balls
RC 65-68
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Checking - Tungsten Carbide on Small Parts and Bearings.
Balls - Fixture - Stainless Steel
Search Rating: 99%
Also see combined categories:
All Fixture and Checking Balls
440C Hardened to RC 55-58.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Fixture - Stainless Steel on Small Parts and Bearings.
Balls - Fixture - Tungsten Carbide
Search Rating: 99%
Also see combined categories:
All Fixture and Checking Balls
RC 65-68
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Fixture - Tungsten Carbide on Small Parts and Bearings.
Balls - Checking - Stainless Steel - With Tapped Shank
Search Rating: 98%
Also see combined categories:
All Fixture and Checking Balls
440C Hardened to RC 55-58.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Balls - Checking - Stainless Steel - With Tapped Shank on Small Parts and Bearings.
Plungers Indexing
TopHide PicturesPlungers - Indexing - Precision - Ball Grip
Search Rating: 63%
Also see combined categories:
All Indexing Plungers
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - Ball Grip on Small Parts and Bearings.
Plungers - Indexing - Precision - Locking - Ball Grip
Search Rating: 62%
Also see combined categories:
All Indexing Plungers
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - Locking - Ball Grip on Small Parts and Bearings.
Plungers - Indexing - Precision - With Support - Ball Grip
Search Rating: 62%
Also see combined categories:
All Indexing Plungers
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - With Support - Ball Grip on Small Parts and Bearings.
Plungers - Indexing - Precision - With Support - Locking - Ball Grip
Search Rating: 61%
Also see combined categories:
All Indexing Plungers
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Precision - With Support - Locking - Ball Grip on Small Parts and Bearings.
Plungers - Indexing - Cam Action - With Hex Nut
Search Rating: 42%
Also see combined categories:
All Indexing Plungers
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
The Small Parts and Bearings website also has an extensive range of specialty engineering products. Check it now for a possible expanded range of Plungers - Indexing - Cam Action - With Hex Nut on Small Parts and Bearings.
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
Top
About Us
Brands
Download
Clearance
Contact
Counter Sales
Dental Bearings
Distributors
FAQ
Freight
Hobby Site
Hobby
Large Bearings
Mailorder Form
Ordering
Payments
Privacy
Products
Search Site
Online Store
Technical
Terms
Top
